• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.477-492
• /
• 2001

About half of bridges in United States are considered to be deficient and therefore are in need of repair or replacement. Half of these are functionally obsolete, and others do not have required strength For these bridges repairs and replacements are needed To avoid the high cost of rehabilitation the bridge rating must corectly report the present load-carrying capacity Rating engineers use Allowable Stress Design(ASD) Load Factor Design(LFD), and Load Resistance Factor Design(LRFD) to evaluate the bridge load carrying capacity In this paper the load rating methods are introduced and bridge load test data are collected. The reasons that make the difference between test results and analytical results are explained for each bridge load test And load rating methods are applied to real bridge. The rating factors from each method are compared.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2007

In view of energy supply, biogas can be seen as alternative fuel by substituting considerable amount of fossil fuel and may be utilized for heat and power production or for transport fuel production ($CH_4-enriched$ biogas). The aim of this research is to analyse the emission of $NO_x$ and CO from biogas fired combustion engine for electric power production. The result indicate a significant effect of biogas composition ($CH_4-CO_2$ ratio) and biogas flow rate on the air pollutants emission. The emission factors from this study were compared with those of U.S. EPA. Low $CH_4-CO_2$ ratio condition typically shows the lower $NO_x$ and CO emission than higher $CH_4-CO_2$ ratio condition. At normal $CH_4-CO_2$ ratio (7:3) emission factors of $NO_x$ and CO were 1.29 and 30.43 g/MMBtu, respectively. At low $CH_4-CO_2$, ratio (6:4) emission factors of $NO_x$ and CO were 0.646 and 60.86 g/MMBtu, respectively, It should be emphasized that the actual emission may vary considerably from these results due to operating conditions including torque load and engine speed.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.

• Journal of Korea Port Economic Association
• /
• v.22 no.2
• /
• pp.35-60
• /
• 2006

This paper uses input-output techniques to analyze the impacts of the coastal and inland water transportation (CIWT) upon the Korean economy between 1990 and 2000. The impacts were identified by means of backward and forward linkages effects, production inducing and import-inducing effects, and commodity prices repercussion effects of the coastal and inland water transportation. The data of this study come from The Bank of Korea databases for Input-Output Structure of the Korean economy. The major findings in this study can, among others, be summarized: that the power of dispersion(=backward linkage effect) and the degree of sensitivity (=forward linkage effect) of CIWT are higher than those of the deep sea transportation sector and that it has higher production-inducing effect than the average of total industries, while it has lower import-inducing effect than the average of total industries.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.1-8
• /
• 1985

To verify the cause of high productivity in Typha stand, leaf area index(LAI), leaf orientation and inclination, specific leaf area (SLA), and radiation interception profiles were determined in a natural Typha$\times$glauca stand. Throughout the growing season, the leaf inclination has been kept at near-right angle and leaf orientation has been random. These chracteristics were responsible for an uniform spatial arrangement of the leaves within the canopy and could be explained by the SLA value, which increased in their higher strata. The extinction coefficient (K) of the canopy, 0.12 to 0.20, was one of the smallest value out of terrestrial plant communities. At least more than 25% of full radiation penetrated into the lowest stratum of the canopy. High productivity of the Typha would be attributed to efficient penetration of the radiation in virtue of the stiff and straight leaves even though rather small LAI.

• Environmental and Resource Economics Review
• /
• v.12 no.3
• /
• pp.469-485
• /
• 2003

This paper reports on the results of epidemiological investigation of daily health effects in the elderly associated with daily exposure to particulate matters in Korea. Our main focus is on the potential difference in health effects between PM10 and PM2.5. While the Korean environmental authority has set an ambient standard for PM10, the government currently does not monitor PM2.5, which has no national standard. A daily data on respiratory symptoms as well as PM concentrations are collected for a total of 120 days. Using a probit model, we find statistically significant negative health effects of PM2.5 on respiratory symptoms among the nonsmoking elderly, while PM10 does not show such effects from the estimation. This result suggests that, for air quality regulatory purposes, PM2.5 can be a more appropriate air pollutant than PM10.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.41-48
• /
• 1999

Silica is the most popular materials as a filler of EMC for microelectronic packaging. However, because of its low thermal conductivity, the use of silica is restricted to parts requiring high thermal dissipation. The superior fluidity of EMC can be achieved with a combination of filler size distribution. In this study, physical properties of EMC filled with the crystalline silica(13$\mu\textrm{m}$) which have high fluidity and low cost and the AlN(2 $\mu\textrm{m}$) which have high thermal conductivity and low coefficient of thermal expansion were evaluated by changing the AlN/silica ratios. As a result of the evaluation of physical properties of EMC, the optimum mixing ratio of AlN/crystalline silica was 0.3/0.7. In this condition, binary mixture(AlN/crystalline silica) filled EMC showed superior properties, i.e., in the thermal conductivity, CTE, dielectric constant, flexural strength, and thermal shock resistance without reduction of fluidity.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.705-715
• /
• 2016

The main aim of this study was to investigate the potential of wood charcoal on removing furan compounds (5-hydroxymethylfurfural (5-HMF), furfural) known as fermentation inhibitors in sugar hydrolysates obtained from supercritical water treatment of lignocellulosic biomass. For this aim, model hydrolysate was prepared, and removal rates of sugars or furan compounds depending on wood charcoal concentration and treatment time were calculated and analyzed in comparison with the case of activated carbon. 0.5, 1, 2, 4, 8, or 12% (w/v) of wood charcoal or activated carbon was loaded into the model hydrolysate, containing glucose, xylose, 5-HMF, and furfural, and treatment was conducted for 1, 3, 6, 12, or 24 h. After treatment, removal rates of 5-HMF and furfural gradually increased as wood charcoal concentration or treatment time increased, and over 95% of 5-HMF and furfural were removed at 8% of wood charcoal concentration and 3 h of treatment time, while the loss of sugars (< 2%) was hardly observed. On the other hand, in the case of activated carbon treatment, removal rates of 5-HMF and furfural were over 95% at mild condition (activated carbon concentration: 8%, treatment time: 1 h), but over 10% of glucose and xylose were removed. Therefore, considering sugar production and further process applied sugar, the wood charcoal treatment of sugar hydrolysate was more effective for removing furan compounds and maintaining the sugar yield.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.237-246
• /
• 2014

In this study, it is estimated how many changes of macroeconomic variables are happened under the proposition of import substitution of mining products 1% using macroeconometric input-output model. For this, used macroeconometric input-output model is composed of 141 behavioral equations representing the macroeconomy structure. In general, macroeconometrics models are constructed mainly on the side of the expenditure then it is not easy to estimate the effects of the shocks occurred from industry level. To mitigate that, this study tries to construct a macroeconometric input-output model. Macroeconometrics model which is useful to estimate the effects of macroeconomic shocks, economic policy and more, in this study, is linked with input-output table through the NDI(national disposable income) derived from compensation of employee. And this paper presents the estimation results of import substitution effects of mining products on Korean economy. As a results, GDP is increased 0.00073%, gross labor employed 0.00029%, current balanace 0.00010% and unemployment rate is mitigated 0.00233%.

• 지역과문화
• /
• v.4 no.2
• /
• pp.1-23
• /
• 2017

The regional development plan by the city of Andong in establishing the foundation for cultural eco-tourism in the cultural area of confucianism(2010-2020) consists of 2 leading projects (the World Confucian Scholar Culture Park, the Korean Culture Theme Park) and 2 strategic projects (the Confucian Scholars' Literature Park, the Sunsunghyun Culture Complex, the Traditional Bittarae Weaving Village). By inter-regional input-output analysis, their multiplier effects of output, value-added, income and employment are estimated respectively 990.2 billion won(multiplier 2.23), 318.2 billion won(multiplier 0.72), 187.7 billion won(multiplier 0.42), and 4,791 workers(multiplier 10.6 workers/billion won). The ongoing project has been, however, delayed due to various issues and has hit a ceiling towards achieving the original objectives of the familiarization, industrialization and globalization of Confucian culture. To overcome these problems, the associated plans of constructing the Korean SMART LINK LINE, of developing contents blending traditional culture and ICT, of establishing tourist complexes and infrastructure around Lake Andong, and of constructing interactive attractions of traditional culture were proposed as new growth-leading plans.