• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.91-100
• /
• 2009

In this paper, we propose a wearable augmented reality system using gaze interaction. Gaze interaction has been considered to be the potential of easy, natural and fast way of interaction and becomes a suitable way in optical see-through HMD based wearable AR. Our system recognizes user's gaze point, half blink motion and displays the information of object seen by user to HMD. Half blink selection technique avoids the Midas touch problem and represents user's intention correctly. We've developed a AR annotation system and estimated the usability of gaze interaction. The accuracy and robustness of our technique is verified on the experimental results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.532-542
• /
• 1996

The electrical and optical properties of the annealed $LiNbO_{3}$ single crystal with congruently melting composition and MgO or ZnO doped $LiNbO_{3}$ single crystal grown by the FZ method. The electrical and optical properties such as electrical conductivity, dielectric constant (Curie temperature), electro-mechanical coupling factor, optical transmittance and refractive indices of the grown crystals were measured and the nonlinear refractive indices of the grown crystals were calculated theoretically. The doping effects of MgO and ZnO were investigated by comparing the electrical and optical properties of the undoped $LiNbO_{3}$ single crystal and those of the $LiNbO_{3}$ single crystals doped with MgO or ZnO.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.431-436
• /
• 2013

Polycarbonate (PC) films have been irradiated with various kinds of ions according to energy and dose. Change of the optical transmittance and chemical characteristics were confirmed by UV-VIS and FTIR (ATR) spectroscopy respectively. These UV-A block in 400 nm was variable from 10 to 100% according to energy and doses. Surface electrical resistance of PC film irradiated by ion beam was $10^6-10^{13}{\Omega}/cm^2$, which reveal variation of conduction. Contact angle of film irradiated by ion beam was decreased than the pristine film. Polymer surface morphology was examined by means of atomic force microscopy (AFM). As expected, degradation of polymer film was higher after irradiation with heavier Xe ions but the roughness in the polymer surface morphology were more pronounced for Ar ions. This observed effect can be explained by stronger compaction of polymer surface layer in the case of Xe irradiation, connected with a reduction of free volume available.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.287-292
• /
• 2010

We have investigated the effects of oxygen flow ratios on the structural, morphological, and optical properties of AlN thin films grown by using radio-frequency reactive magnetron sputtering. The AlN thin films were deposited at $300^{\circ}C$ of substrate temperature, and the reactive gas were supplied with both nitrogen and oxygen. The oxygen flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 0%, 10%, 15%, 20%, 25%, and 30%. The structural, morphological, and optical properties of the deposited AlN thin films were examined by using X-ray diffractometer, scanning electron microscopy, and ultraviolet-visible spectrophotometer. The AlN thin film grown at 10% of oxygen flow ratio indicated an average transmittance of 91.3% in the wavelength range of 350~1,100 nm and an optical band gap of 4.30 eV. The experimental results suggest that AlN thin films can be deposited optionally by varying the oxygen flow ratio.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.262-267
• /
• 2004

Processed foods were developed using amaranth starch and flours. Amaranth seeds were untreated (UT), defatted (DF), germinated (GM), roasted (RT), popped (POP), and extruded (EX1 and EX2). Amaranth flours showed A-type pattern on X-ray diffractograms, while crystallinity was not observed in POP, EX1, and EX2. POP and EX1 showed highest (740.3%) and lowest (38.5%) water-binding capacities, respectively. Transmittances of RT, POP, EX1, and EX2 flour suspensions were higher than those of others. Transmittance of amaranth starch and flours differed with processing methods. RT, POP, EX1, and EX2 showed higher transmittance at $60^{\circ}C$. Initial pasting temperature of amaranth flours by RVA were $68.1-73.0^{\circ}C$, and peak viscosities of GM and RT were 31.6 and 401.1 RVU, respectively. Melting endotherms of POP, EX1, and EX2 were not observed in DSC thermograms.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.18-22
• /
• 1987

Starch granules of cow pea were oval with their sizes of $6-22{\mu}$m. X-ray diffraction pattern of starch granules showed some crystallinity at $2{\theta}$ $15^{\circ}$, $17.1^{\circ}$, $18.1^{\circ}$, $22.9^{\circ}$. The blue value of starch was 0.370, amylose contents 28.1% and water binding capacity 70.6%. Swelling power of the starch increased rapidly from $65^{\circ}C$ to $75^{\circ}C$ thereafter increased less rapidly. Solubility showed the same pattern as the swelling power. Optical transmittance of 0.2% starch suspension was increased rapidly from $70^{\circ}C$ and the gelatinization between $70^{\circ}C$ and $90^{\circ}C$ was single stage. Amylogram of 4% starch solution showed no peak viscosity but 6% starch solution showed peak viscosity.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.12-17
• /
• 1987

Physicochemical properties and gelatinization kinetics of Ol barley starch were studied. The granule size was $13-28\;{\mu}$ and the granule shape was oval or circular. Also, Ol barley starch had amylose content of 32%. Swelling power and solubility reached to the maximum values of 7.22 and 2.28% at the gelatinization temperature of $90^{\circ}C$. The pasting temperature of starch was slightly higher than those of powder and defatted powder. Most of the increase in light penetration was accomplished from the gelatinization temperature of $80^{\circ}C$ to $90^{\circ}C$. The gelatinization reaction of lL barley starch occurred in 2 stages. The activation energy of lst stage gelatinization reaction was 23.84 kcal/mole, whereas activation energies of 2nd stage gelatinization reaction were 33.38 and 72.82 kcal/mole around $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.224-232
• /
• 2015

The effects of cold plasma (CP) treatments on the physicochemical and biodegradable properties of a corn biomass-containing polyester (CBPE) film were studied. The CBPE film was treated with CP generated by $N_2$, $O_2$, He, Ar, or dry air at 400-900 W and 667 Pa for 10-40 min. The glass transition temperature of the CBPE film ($-30.2--28.6^{\circ}C$) was not affected by the CP treatment, while the elastic modulus and water vapor permeability decreased (p<0.05). The ink printability was improved by the treatment and the improved printability was maintained during storage for 56 days at room temperature. Roughness of the film increased after treatments and the level of roughness appeared to increase during storage. Heat and microbial biodegradability of the CBPE film was improved by the air-CP treatment (p<0.05). These results have demonstrated the potential of applying CP treatments to improve the flexibility, printability, and biodegradability of CBPE films.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.835-839
• /
• 2002

Stoichiometric $LiNbO_3$(LN) single crystals of 1 mm diameter and 30∼40 mm length with co-doped the $Er_2O_3$ and MgO were grown by the Micro-Pulling Down(${\mu}$-PD) method. The grown crystals were investigated for the change of the up-conversion property by the $Er_2O_3$ and MgO addition and the optical damage by the MgO concentration. Also, the crystals were studied the defects using the optical microscope and it is identified the homogeneities of the distribution of the $Er_2O_3$ and MgO concentration by the Electron Probe Micro Analysis(EPMA).

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.234-242
• /
• 1998

Changes in transmission and thermoluminescent characteristics were used in order to find out the optimum growth condition of CsI single crystal scintillators which were made relatively defect-free using Czochralski method. Impurity distribution in the crystals and the intensity and number of thermoluminescent glow peaks decreased as the process of crystallization was repeated. The direction of crystal growth turned out to be (110), the crystal structure of grown CsI was bee, and its lattice constant was found to be $4.568{\AA}$. The activation energy (trap depths) of CsI:3rd was 0.45 eV and its frequency factor was $5.18{\times}10^5\;sec^{-1}$.