• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.153-168
• /
• 2000

An estuarine marsh is semi -inclosed inlets, located between coastal and terrestrial environment. The sediment transport by river and tide through tidal river and vertical accretion by sediment accumulation are important processes in estuarine marsh. An analysis of the vertical accretion rate at various time scale is important work for understanding and managing coastal environments. The purpose of this study is to determin the spatial characteristics of vertical accretion rate in an estuarine marsh, Sunchon Bay, in the southern coastal region of Korean peninsula. The methods of analysis are sedimentation rate by individual tidal cycle, annual accretion rate, concentration of total suspended load in water column. Spatial characteristics of sedimentation rate by individual tidal cycle was investigated using 30 filter paper traps. Sedimentation rate by individual tidal cycle at levee edge was higher than that at back marsh. The sedimentation rate decreased with distance from estuarine front. Levee effect and proximity to the turbidity maximum zone result in a higher sedimentation rate in the levee edge. There is a weak relation-ships between tidal regime and sedimentation rate by individual tidal cycle. Spatial cahracteristics of annual accretion rate was investigared using 30 artificial marker plots. Annual accretion rate at back marsh($1.5{\sim}3.5cm/yr$) was higher than that at tidal river levee edge($0.8{\sim}3.0cm/yr$). Total suspended load (TSL) concentrations in water column also indicate this spatial characteristics of annual accretion rate. TSL concentration in water column leaving the vegetation part dramatically decreased. There is a very strong relationship between the concentration of suspended load and accretion rate. These results indicate that annual accretion rate is controlled by vegetation cover and proximity to the turbidity maximum zone. This difference of spatial characteristics of vertical accretion rate ar various time-scale was due to the fact that surface sediment of levee edge was eroded by tide and other factors. The major findings are as follows. First, the spatial characteristics of vertical accretion rate are different from various time-scale. Second, the major mechanism for the vertical accretion rate in this region is suspended load trapping by vegetation. Third, this region is primarily a depositional regime over the time-scale of the present data Fourth, this estuarine marsh is accreting at rates beyond other area.

• Journal of Wetlands Research
• /
• v.14 no.3
• /
• pp.375-384
• /
• 2012

The sedimentary processes of the Ganghwa tidal flat has been changed over 20 years because of the large-scale construction projects. The sedimentary environment of the Donggum tidal flat, located in the eastern part of Ganghwa tidal flat and in the lower reaches of Yeomha channel, was affected by changes the tidal current regime and estuarine circulation. These resulted an occurrence of rapid deposition in the tidal flat. The silt-clay laminated silt facies in the upper parts of two core sediments suggested that deposition had been relatively high in the tidal flat. The sedimentation rates from the cores using $^{210}Pb$ analysis were 3.25cm/year(st. 3) and 3.47cm/year(st. 5). However the short-term sediment accumulation rates from 2010 to 2012 were mostly less than 1cm/year, indicated that the sediments deposited relatively low rates. As a result, the sediment in the Donggum tidal flat rapidly accumulated during 2000s due to constructions of man-made structures. Recently, the increase of elevation in the tidal flat resulted to show relatively low sedimentation rate with seasonal variations.

• Journal of the Korean earth science society
• /
• v.27 no.6
• /
• pp.659-669
• /
• 2006

In Kwangyang Bay, the south coast of Korea, surface sediments and sedimentation rates have been investigated to understand the distribution and variation of tidal flat sediments after the construction of sea dyke. The mean grain size of the surface sediments during autumn is coarser, and decrease from winter to summer except for temporarily coarsening in the early summer. The depositional processes are prevalent in spring, while erosional processes are dominant in summer and autumn. This seasonal variation of sedimentary processes show similar results monitored from 2001 to 2003 before the construction of sea dyke. In the northern area of the bay, net annual sedimentation rates show similar results monitored from 2001 to 2003 before the construction of sea dyke. However, in the western area of the bay, net annual sedimentation rates change from erosion-dominated to deposition-dominated environments. It is considered that the western area of the bay is changed to erosion-dominated environments, as a result of the changes of hydrodynamic conditions, caused by sea dyke construction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.462-469
• /
• 2009

This study suggests a general formula of non-cohesive sediment transport rates for waves and currents which is also valid for wave only or current only condition. On-offshore sediment transport rates with the second order Stokes wave in the shallow water are calculated as the pickup rate times the distance. The formula depicts reasonably that high waves move material offshore, and low waves move material onshore. Also the formula, as is the case the waves with long period tend to move material onshore, shows good results.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.288-302
• /
• 2017

Accurate measurement of benthic nutrient fluxes (BNF) is a prerequisite for evaluating the effect of sediments on nutrient cycle in the surface water. The intact sediment cores were collected in July 2015 at the midstream of Nakdong River. We identified pre-incubation time (6, 12, 24 hr), dissolved oxygen concentration (90, 70, 50% saturation), diffusive boundary layer thickness (0, 0.6-0.8, 1.2-1.4 mm), and incubation temperature (10, 17, 20, $25^{\circ}C$) as the most important control factors, and measured the BNF fluctuation with the variation of these factors using the laboratory sediment core incubation method. Since the chemical composition, redox condition, hydrodynamic regimes and microbial activities at the sediment-water interface were changed as a result of the alteration of control factors, sediment core incubation should be conducted under as close to the natural conditions of study site as possible, in order to produce the results similar to actual values. Relative percentage differences between two replicates were below 20% in most control factors, which showed satisfactory precision for strict compliance with the experimental conditions and procedures. In the further studies, we will compare the results of core incubation with those of in situ measurements to confirm the accuracy of the sediment core incubation method.

• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.631-640
• /
• 2018

To understand the formation and evolution of a sedimentary basin in basin analysis and modelling studies, it is important to analyze the thickness and age range of sedimentary layers infilling a basin. Because the compaction effect reduces the thickness of sedimentary layers during burial, basin modelling studies typically restore the reduced thickness using the relation of porosity and depth (compaction trend). Based on the compilation plots of published compaction trends of representative sedimentary rocks (sandstone, shale and carbonate), this study estimates the compaction trend ranges with exponential curves and equations. Numerical analysis of sedimentary compaction is performed to evaluate the variation of porosity and layer thickness with depth at key curves within the compaction trend ranges. In sandstone, initial porosity lies in a narrow range and decreases steadily with increasing depth, which results in relatively constant thickness variations. For shale, the porosity variation shows two phases which are fast reduction until ~2,000 m in depth and slow reduction at deeper burial, which corresponds to the thickness variation pattern of shale layers. Carbonate compaction is characterized by widely distributed porosity values, which results in highly varying layer thickness with depth. This numerical compaction analysis presents quantitatively the characteristics of porosity and layer thickness variation of each lithology, which influence on layer thickness reconstruction, subsidence and thermal effect analyses to understand the basin formation and evolution. This work demonstrates that the compaction trend is an important factor in basin modelling and underlines the need for appropriate application of porosity data to produce accurate analysis outcomes.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.382-389
• /
• 1995

This study intended to investigate the sedimentation rates of core sediments of the western part of the East Sea using Accelerator Mass Spectrometer (AMS) C-age on the planktonic foraminifera or acid-ex-tracted residue, base-soluble and base-extracted residue fractions. On the basis of the depth-age correlations, the sedimentation rates during the late Holocene period of Cores HP-10, HP-3, 94-9 and 92-3 were 30 cm/kyr, 10 cm/kyr, 11 cm/kyr and 112 cm/kyr, respectively. The sedimentation rates of the westem part of the East Sea, however, seems to be ranged from 11 cm/kyr to 30 cm/kyr, because the rates of the only two cores (Cores HP-10 and 94-9) which were dated at more than three depths are considered to be more reliable. The rates in each core sediment showed good linear relationship with the sample depth, suggesting that the sea-level rise had been finished nearly during the early Holocene period and the general depositional environments had been lasted rather constant during the late Holocene period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.909-914
• /
• 2008

미세-점착성 퇴적물로 구성되는 퇴적저면의 침식특성을 해석하기 위해, 고령토 퇴적저면에 대한 침식실험이 환형수조를 이용하여 수행되었다. 현재, 퇴적저면의 침식특성 연구에 대한 국내사례는 전무한 실정으로, 본 연구는 퇴적저면에 대한 침식실험 방법 및 결과의 타당성 검증을 목적으로 한다. 이를 위하여, 본 연구에서는 압밀시간 조건에 따라 4가지의 서로 다른 퇴적저면이 조성되었고, 각 저면별로 저면깊이에 따른 저면밀도의 변화가 우선적으로 정밀 측정되었다. 각 퇴적저면별 침식실험으로부터는, 바닥전단응력(${\tau}_b$)의 변화에 따른 저면 침식깊이(즉, 수층 부유사 농도)의 변화 측정을 통하여, 저면깊이에 따른 저면전단강도(즉, 침식한계전단응력, ${\tau}_S$)의 변화 값들이 정량적으로 분석되었으며, 최종적으로 잉여전단응력(${\tau}_b-{\tau}_S$)과 침식률 간의 관계식이 산정되었다. 퇴적저면 침식특성에 관한 과거 해외 연구 결과와의 비교 검토를 통하여, 본 연구에서 사용 혹은 적용된 실험장치, 실험 방법 및 실험결과가 타당성이 있음이 확인되었다.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.9-15
• /
• 2003

Two piston cores, obtained from the southwestern Ulleung Basin in East Sea, were analyzed to study the geochemical characteristics of the late Quaternary sediments and to detect any changes in sedimentary environment. The results show that the capacity of Total Organic Carbon is remarkably higher (average 1.8%) than that known from general open-sea. According to tephrochronology from known eruption ages, the sedimentation rates are high, ranging from 12.1 to 14.9 cm/kyr. The ratios of nitrogen and TOC (average 6.18-7.42) imply that the organic matter in the study area would be of oceanic origin. The correlation between sedimentation rates and sulfur contents suggests that the study area may be on the whole anoxic and somewhat high in primary productivity. During the Termination 1, inflows of organic matters were high. The sedimentary environments are characterized by rapid rates of sedimentation, and high anoxic values were compatible with accumulation of organic matters.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.687-699
• /
• 2001

A 2-dimensional numerical sediment transport model has been developed by using erosion rates observed by SEDFLUME. The model un boundary-fitted coordinate can reduce inaccuracy of sediment model with accurate erosion data. Suspended transport and bed load transport are included in the model together. The model results gave good agreement with particle size distributions in 1-d channel and was more accurate than that of HIDAS of 1-dimensional model. The model applied to an enlarging channel to check model performance in 2-dimensional domain. Bed coarsening reduced erosion and deposition.