• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.183-187
• /
• 2011

본 연구에서는 3차원 수리해석과 함께 유사의 이송, 침식, 퇴적 현상을 연동하여 모의할 수 있는 유한차분 수치모형인 EFDC(Environmental Fluid Dynamics Code)를 이용하여 주운하천 구간으로 유입되는 다입경 혼합유사의 입경별 시 공간적 퇴적분포 특성을 고찰하고, 하상변동 예측에 있어서 유사의 밀도와 모델의 유한차분 격자 구조에 의한 불확실성 해석을 수행하였다. 유입 유사의 입경별 공간적 퇴적특성은 하천 하류부와 단면 확대부에서 발생하는 3차원적 수리현상과 매우 밀접한 상관성을 보였으며, 굴포천과 합류하는 주운수로 유입부에서는 대부분 입경이 큰 비점착성 유사($63{\mu}m$ 이상)인 사질(sand)입자들이 주로 퇴적되는 것으로 나타났으며, 주운하천 합류부로부터 하류구간까지는 $4\sim63{\mu}m$ 입자의 실트질(silt) 유사가 대부분 이송되어 퇴적되는 것으로 분석되었다. 점착성 유사인 $4{\mu}m$ 이하의 점토(clay)는 단면이 확대되어 유속이 매우 느린 구간이나 사수역을 중심으로 퇴적되는 것으로 나타났다. 단면 횡방향 분포특성은 굴포천과 주운하천이 합류하는 합류부 구간의 주흐름 방향 남쪽에서 흐름의 정체구간이 발생되어 퇴적이 발생하고, 단면 급확대부 양안에서 사수역이 형성되므로 퇴적이 지배적으로 발생되었다. 하상변동 예측의 불확실성 해석을 위해 유사 밀도값에 대한 민감도 분석결과, 하상변동량은 유사밀도($1.3ton/m^3\sim2.65ton/m^3$)가 감소됨에 따라 약 2배까지 증가하는 것으로 분석되어 민감도가 매우 크게 나타났다. 또한 수치격자 구조의 민감도 분석결과, 수층을 3개 층으로 분석한 결과가 단일층 분석결과보다 최대 6배의 하상변동량이 많게 산정되었다. 이는 수심방향의 유속과 부유사 농도의 불균등 분포특성이 실제 자연현상에 더 가깝게 모의되기 때문으로 판단되었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.212-215
• /
• 2001

남악지역에 분포하는 조간대 퇴적층의 층서구조와 퇴적심도 및 기반암의 단열구조를 파악하기 위한 전기비저항탐사를 실시하였다. 조간대 퇴적물에서 비저항은 하부로 갈수록 증가하며 대부분 3.0 Ohm-m이하의 비저항으로 고비저항의 기반암의 기반암과 뚜렷한 경계를 보여준다. 퇴적층의 층후는 퇴적지 중앙부에서 30m를 최대로 북쪽 (고해안선)과 남쪽 (영산강)으로 갈수록 감소하는 경향을 보여주는데 선행 조사된 시추결과와 일치한다. 일부 지역의 전기비저항 해석단면과 시추단면에서 견고한 점토질 (stiff)의 지층이 분포하는데 이 지층은 북서-남동 방향의 고해안선과 나란하게 분포한다. 이것은 퇴적물을 공급한 흐름의 방향과 조간대의 확장방향이 북서-남동 방향임을 지시한다. 기반암의 단열구조로 판단되는 저비저항대는 조사지역의 동부에 집중되어 있으며 단열대의 연장방향은 북서-남동 방향이 우세하다.

• Journal of the Korean earth science society
• /
• v.25 no.4
• /
• pp.270-276
• /
• 2004

Multi-channel Analysis of Surface Waves (MASW) and Seismic Cone Penetration Test (SCPT) have been recently developed to obtain S-wave velocity profiles which were conventionally investigated by a down-hole seismic survey. For unconsolidated sedimentary sites, we studied these three methods, and compared the results with a drilling log. All the methods showed that the changes in the S-wave velocities were consistent with the changes in the sedimentary facies. In addition, the SCPT was most sensitive to changes in sedimentary facies among the three profiles. The results of the SCPT showed that there exists a low velocity zone, which is mainly composed of clayey sand, at the depth of 8${\sim}$12m in the sediments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.302-307
• /
• 2017

본 연구에서 퇴사량조사 실적 및 유량-유사량 관측 자료, 상 하류 수위-유량 자료를 보유하고 있는 B 저수지를 대상으로 3차원 수치모형을 이용하여 저수지 퇴사분포를 분석해 보았다. 또한 수치모형의 검증을 위하여 저수지내 6개 지점에 대한 시추 샘플링을 통해 퇴적토의 깊이를 측정하였다. 퇴적토 샘플링시 시료의 교란을 방지하기 위하여 동일지점에서 2회 샘플링 작업을 수행하였다. 샘플링 시료는 원지반과 퇴적지반의 구분을 위하여 시료분석 이전에 각 단면별 깊이를 측정하였으며, 시료는 각 단면별로 물리적 특성시험을 통해 압밀도를 측정하여 퇴적토의 깊이를 산정하고 수치모형시 검증 자료로 사용하였다. 본 연구에서는 3차원 수리해석과 함께 유사의 이송, 침식, 퇴적현상을 연동하여 모의 가능한 Delft3D 모형을 이용하여 B 저수지에 대한 유사 이송모의를 수행하였다. 모의 결과 저수지의 하폭이 넓어지는 지형 및 만곡부 인근에서 퇴적이 진행되는 결과를 보였으며, 퇴적토 시료와 비교한 결과 퇴적토 깊이는 일부 차이가 있었으나, 퇴적분포 양상은 유사한 결과를 보였다.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.157-168
• /
• 2012

The Eonyang section is located at the confluent area of Samdong River to Taehwa River in Sinhwa-ri, Samnam-myeon, Ulju-gun, Ulsan-si, Korea. Physical analyses such as the OSL age dating, magnetic susceptibility and grain size analysis were performed. Coarse grains in the upper section were deposited by the aeolian processes from the local sources and the grains in the lower section by the fluvial processes. The Eonyang section shows the large differences such as the irregularity in the variations of magnetic susceptibility, large deviations in the Y values and very poor sorting values from the loess sediments in Bongdong, Geochang and Daecheon in Korea. These characteristics in the Eonyang section suggest the multi-source areas such as the Chinese Loess Plateau and nearby floodplain or the influences by the other processes. The loess sediments of Eonyang section were formed during the period from the late MIS 3 to MIS 2.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2018

Izumi sedimentary basin (ISB), west of Shikoku, Japan, is widely distributed across the western side of the Sakuragi Bend of the Japan Median Tectonic Line (MTL). It is not obvious how the ISB formed, but this feature is similar to an asymmetric pull-apart basin. The stratigraphic succession and tuff layers show that ages tend to decrease toward the Sakuragi Bend. We investigate whether the ISB is an asymmetric pull-apart basin using analogue model experiments with running sand. A pull-apart basin of length 60 cm and width 20 cm is formed, and secondary normal faults appear on the surrounding surface. A cross-section parallel to the direction of displacement shows that the stratigraphic succession of the pull-apart basin becomes younger toward the releasing bend. A listric normal fault, which has the opposite dip to the master fault, is observed in a cross-section perpendicular to the direction of displacement. These results are consistent with the observed properties of the ISB west of Shikoku, thereby supporting the possibility that the ISB is an asymmetric pull-apart basin.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.1-14
• /
• 2013

This study aims to investigate the formation and sedimentary environment including formative period, grain composition and climate change from loess-paleosol sequence deposited on a gravel bed of river terrace in the Jincheon Basin, Chungbuk Province. The Jincheon section consists downward of a surface layer, loess-paleosol sequence, transitional layer I, transitional layer II and gravel bed. It can be suggested from the OSL age dating that the sequence was deposited during MIS 6 to 4. The sequence can be divided into four horizons based on the variation in the magnetic susceptibility values. Grain size analysis reveals that the sequence indicates similar properties of grain size to loess deposits in Korea and especially, the Y values in the sequence are lower than those in the loess and paleosol horizons in the Chinese Loess Plateau and similar to those in the Red Clay in the Chinese Loess Plateau and Xiashu loess in the lower reaches of the Yangtze River. These Y values in the sequence can be attributed to the remote source and/or experience of intensive weathering process after deposition in the Korean Peninsula.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.153-163
• /
• 2020

Mineral and geochemical analysis were conducted on two sections (~3.5 m) of red-brown claysilt sediments covering the gneiss and granite weathering zones in Suwon-si for establishing Quaternary paleoenvironmental changes in Korea. The sections were divided into four sedimentary layers (Unit 1-4) by vertical changes in mineral composition and chemical composition. The lowermost unit 1 was a sandy sediment with a high K-feldspar content with a significant contribution of weathered bedrock. Unit 2 was a transition layer showing intermediate characteristics. Unit 3 was a reddish brown clay-silt sediment, with a total clay content of 58% on average, and the main clay minerals were illite-smectite mixed layer minerals and hydroxy-interlayered vermiculite/smectite. Unit 3 contained almost no plagioclase, while the content of kaolin minerals derived by the plagioclase weathering was higher than in the other layers. Unit 4 had similar mineral composition and chemical properties to Unit 3, but had a higher content of plagioclase and chlorite and lower content of kaolin minerals. The chemical compositions of the sections were compared with those in other regions of Korea, suggesting the eolian origin of Units 3 and 4. The paleoenvironmental change in the sedimentary section of this region was interpreted as follows. Weathered products of gneiss and granite, which are bedrocks of this region, were eroded and deposited as sandy sediments in the periphery to form the lower layers (Unit 1, 2), followed by the deposition of the claysilty rich eolian sediments (Unit 3) during the glacial. Unit 3 was chemically weathered during the warm humid climate during the last interglacial, developing a reddish brown color. After that, a eolian sediment layer (Unit 4) was deposited during the last glacial.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.1-8
• /
• 2006

Many boring investigations were achieved in Youngjong-North tidal flat to construct the Incheon International Airport Expressway. Vertical sedimentary profile of this tidal flat has been studied by analyzing these boring data. The deposits of Youngjong-North tidal flat are about 30 meters thick, and the sedimentary layers consist of basal gravel, lower mud, middle silt, middle mud, and upper silt layers in ascending order. Semi-consolidated and oxidized belt with yellowish brown color, which appears above or within middle mud layer, exists in $-3{\sim}-5$ meters altitude. There are some stratigraphical problems to admit the top surface of this oxidized belt as the unconformity surface between Holocene and Pre-Holocene tidal flat deposit.

• Journal of the Korean earth science society
• /
• v.27 no.2
• /
• pp.221-235
• /
• 2006

In order to understand the transport mechanism of tidal beach sediments in Deukryang Bay, south coast of Korea, beach profiles, surface sediments, sedimentation rates and hydrodynamic conditions have been investigated. The beach is composed of a steep beach face and gentle low-tide terrace, showing general morphologic characteristics of tide dominated beach. Central beach face of an indented coast becomes flattened in summer, but ridge and runnel system developed in other seasons makes the beach profile rather irregular. These seasonal variations of beach profiles and sedimentation rate indicate that beach sedimentation is mainly controlled by both tide and wave processes. Erosion is prevalent in winter when strong wind wave is dominant, while deposition is dominant in other seasons. However, central beach showed an apparent erosional phase in summer. This is caused by strong waves induced by southerly strong winds occurring ephemerally during the summer. On the other hand, sedimentation rates are -89.2 mm/yr on the central beach and 60.5 mm/yr and 38.2 mm/yr on the sides. This result suggests that sediments are eroded on the central beach and subsequently transported to the both sides. Therefore, the central part of Sumun beach, used as a beach bathing site, will be continuously eroded, if nearby dyke continues to prevent the sediment supply from sources.