• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.548-559
• /
• 2019

Purpose: Analysis method of V2I data driven motorway service area usage behavior to cope with manpower survey. Method: Segmentation of traveling state group and boundary using the distribution characteristics of traveling speed data of individual vehicles. Result: As a result of the verification, the use rate of resting places in lunchtime surged, and the boundary between the distribution status of the traffic speed data was clearly or unclear. Conclusion: The effect of the cost reduction is big because it can cope with the use of rest area survey by manpower and there is no limit in the time and space range of investigation. The dynamic utilization rate of each time sequence, such as a service area/drowsiness shelter/simple service area, with a V2I system, can be calculated. Identify illegal parking on highway section. Identify the unexpected situation in the road section. Identify the real-time service area utilization rate and congestion information.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.113-122
• /
• 2008

This study extended Park et al.(2007c), which analyzed the efficiency of a hierarchical transit network, showed the result of a real data, and analyzed its applicability. Operating cost was estimated using a model which was established in this study, and minimum transit demand was derived from the operating cost. The minimum transit demand value is just a sample calculation, thus it varies by many inside and outside factors of the model. Looking at the inside of the model, operating cost and travel speed are major factors, and the possibility of introducing urban subway becomes high when the operating cost of the transit system is low and its travel speed is high. As far as the outside factors are concerned, according to the analysis on the network structure, transit demand, and transit mode share, the minimum transit demand value which was derived in this study will be the maximum value among the possible values. In the feasibility study, the benefit is likely to be overestimated and the cost is likely to be underestimated than those of this study. It could be concluded that the methodology of a feasibility study is appropriate in the field standard. This study analyzed the efficiency of introduction of urban subway using analytical approach, thus has many shortcomings and limitations. However the practical approach, like feasibility study, has some limitations as well. This study could be a basis on establishing an analysis framework that is more accurate and reasonable by comparing analytical approach and practical approach.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.60-68
• /
• 2013

This study developed plural gravity models and their application method in order to increase the accuracy of trip distribution estimation. The developed method initially involves utilizing the coefficient of determination ($R^2$) to set the target level. Afterwards, the gravity model is created, and if the gravity model's coefficient of determination is satisfactory in regards to the target level, the model creation is complete and future trip distribution estimation is calculated. If the coefficient of determination is not on par with the target level, the zone pair with the largest standardized residual is removed from the model until the target level is obtained. In respect to the model, the removed zone pairs are divided into positive(+) and negative(-) sides. In each of these sides, gravity models are made until the target level is reached. If there are no more zone pairs to remove, the model making process concludes, and future trip distribution estimation is calculated. The newly developed plural gravity model and application method was adopted for 42 zone pairs as a case study. The existing method of utilizing only one gravity model exhibited a coefficient of determination value ($R^2$) of 51.3%, however, the newly developed method produced three gravity models, and exhibited a coefficient of determination value ($R^2$) of over 90%. Also, the accuracy of the future trip distribution estimation was found to be higher than the existing method.

• 베이커리
• /
• no.1 s.318
• /
• pp.98-103
• /
• 1995

1.일본맥도날드 2천억엔 달성의 비결은 최고정도 매상 예측 시스템에 있다. 2,시장규모가 매상의 크기를 결정한다.3.점포의 시계성으로 인한 매상결정 4.대형시장의 출점 전략5.동선이 잘못되면 실패한다.6.상권인구10만명의 의미는 (현장실측중심) 7.오피스성향이 강하면 매출이 올라가지 않는다.8.입지전략에 있어 건물평가의 의미 9.매상예측에 관한 통행량의 바른 분포 10.경쟁회상의 영향과 출점전략 11.영업력을 매상 예측요소에 선정하는 방법 12.현장을 실시하는 기준

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.12-19
• /
• 2010

In road network, especially in urban area, inefficiency of travel time is caused by signal control and turn maneuver at intersection and this inefficiency has substantial effects on travel time. When searching for the shortest path, this inefficiency which is caused by turn maneuver must be considered. Therefore, travel time, vehicle volume and delay for each link were calculated by using simulation package, PARAMICS V5.2 for adaptation of turn penalty at 16 intersections of Gangnam-gu. Turn penalty was calculated respectively for each intersection. Within the same intersection, turn penalty differs by each approaching road and turn direction so the delay was calculated for each approaching road and turn direction. Shortest path dealing with 16 intersections searched by Dijkstra algorithm using travel time as cost, considering random turn penalty, and algorithm considering calculated turn penalty was compared and analyzed. The result shows that by considering turn penalty searching the shortest path can decrease the travel time can be decreased. Also, searching the shortest path which considers turn penalty can represent reality appropriately and the shortest path considering turn penalty can be utilized as an alternative.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.1
• /
• pp.26-41
• /
• 2012

This study investigates the time-space characteristics of intra-urban passenger flows in the Metropolitan Seoul area. In particular, we analyze the relationships between transit ridership and land use through the use of the subway passenger flow data obtained from the transit transaction databases. For this purpose, the strength of each subway station, i.e., the number of total in-coming and out-going passengers at each station, in the morning, afternoon, and evening, is calculated and visualized, which reflects urban land use patterns. Then the subway stations are classified into four groups via a hierarchical analysis of the in-coming and out-going passenger flows at 353 stations. Each group appears to have characteristic properties according to the region, e.g., residential areas and central business districts. This has been confirmed by the analysis which probes explicitly the relationship between the local socio-economic variables and station groups. This analysis, disclosing the inter-relationship between the subway network and urban land use, may be useful at various stages in urban as well as transportation planning, and provides analytical tools for a wide spectrum of applications ranging from impact evaluation to decision-making and planning support.

• Journal of the Korean Regional Science Association
• /
• v.33 no.3
• /
• pp.101-113
• /
• 2017

This study examines the mobility of the disadvantaged population groups in terms of public transportation using the 2014 smart card data in Seoul, Korea. Particularly, we focus on the disadvantaged population such as senior group, junior group, and low-income population group. Based on the spatial distributions of public transportation mobility levels and the disadvantaged population groups, we identify specific areas where public transportation service should be improved for the disadvantaged population. As a result, we identify 15 administrative-dongs where the ratio of the disadvantaged population is high while the mobility index of public transit is low. The main contributions of this study are as follows. First, we use the smart card data which contains the information of actual trip made by individuals and develop the evaluation process of urban mobility for the disadvantaged population groups. Second, we identify the specific areas where public transportation service should be improved for the different group of the disadvantaged population. Lastly, we discuss policy implications to improve the urban mobility of the disadvantaged population.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.93-99
• /
• 2012

This study analyzes traffic data which are collected by VDS(Vehicle Detection System) to research the relationship between spacing distribution and vehicles' relative speed. The collected data are relative speed between preceding and following vehicles, passing time and speed. They are also classified by lane and direction. For the result of the analysis, in the same platoon, we figure out that mean of spacing is 40m, which can be a value to determine section A to D. To compare spacing according to time interval, this study splits time intervals to peak hour and non-peak hour by peak hour traffic volume. In conclusion, vehicles in peak hour are in car following because most drive similar speed as preceding vehicle and they have relatively small spacing. On the other hand, non-peak hour's spacing between vehicles is bigger than that of peak hour. This implies driver's behaviors that the less spacing, the more aggressive and want to reduce their travel time in peak hour, whereas most drive easily in non-peak hour and recreational trip purpose because of less time pressure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.11-16
• /
• 2009

The estimation of total travel time on highway link for a day or year is the most important process for the feasibility analysis of highway or railway. Most of current guidelines for feasibility studies have been based on the time-traffic volume relationship from the BPR, and the traffic volumes have been determined by the application of the design hour factor to the annual average daily traffic volume. Both of the BPR function and the application of the design hour volume may result in the over-estimation of travel time due to the fact that the traffic volume on the large portion of highway links in Korea are close to the capacities. This study proposed a new way which is based on the distribution of hourly volumes for a year. It could be closer to the real situation, and provide more reasonable estimation. This methodology was validated for the national highways, but may be applicable for any type of highway with the AADT.

• Journal of Korean Society of Transportation
• /
• v.13 no.2
• /
• pp.19-42
• /
• 1995

1980년대 후기부터 교통정책의 우선 목표는 지역경제성장 자체가 교통문제를 스스로 해결할 수 있도록 하기 위하여 종래의 관리 중시의 정책은 다시 토지이용 정책으로 변화를 초래하엿다. 오늘날 대도시는 개개 졍제활동 주체들의 동적인 경제 행태에근거하여 분산구조를 띠고 있다. 이러한 동적인 경제행태에 미치는 요소들은 교통체계와 토지이용과 상호연관성의 연구에 필수적인 지가, 인구분포, 통행행태등이다. 그러나 전통적인 단핵도시 모형은 대도시의 분산구조형태의 동적인 과정을 설명하는데는 한계가 있다. 본 연구는 대도시의 변천과정을-도심 및 부심의 출현·소멸현상-설명함으로써 도시교통정책 필수적인 입지와 통행패턴에 대한 새로운 동태적 이론의 기초를 제공하는데 그 목적이 있다. 이를 위하여 지역경제 성장과 도시공간구조와의 동태적관계를 통합하는 토지이용과 교통의 연속 모형을 개발·응용하였다. 개발된 모형에서는 교통량에 따른 교통비용, 도시공간구조로 인한 외부효과들, 경제활동주체들의 비동질성, 이주비용, 그리고 집적 이익등이 매기마다 내생적으로 결정되어 대도시의 공간구조 변화를 설명한다. 경제 호라동주체들간의 ? 호물리적 교류는 소득 증대에 의하여 경제구조가 변함에 따라 새로이 결정된다. 가상적 도시와 자료를 가지고 실험한 결과 비동질적인 경제주체들의 불균형적 성장이 장기적으로 도시구조에 영향을 미치며, 기본적인 경제행위에 따라 장기동태적인 과정을 통하여나타나는 도시의 분산구조형태의 중요성을 보여주고 있다. 또한 교통비용의 변화에 따른 민감도분석을 통하여 모형의 실용성을 검정하였다.