• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.1-16
• /
• 2020

With the advent of the fourth industrial revolution era, there has been a growing interest in deep learning using big data, and studies using deep learning have been actively conducted in various fields. In the transportation sector, there are many advantages to using deep learning in research as much as using deep traffic big data. In this study, a short -term travel speed prediction model using LSTM, a deep learning technique, was constructed to predict the travel speed. The LSTM model suitable for time series prediction was selected considering that the travel speed data, which is used for prediction, is time series data. In order to predict the travel speed more precisely, we constructed a model that reflects both temporal and spatial effects. The model is a short-term prediction model that predicts after one hour. For the analysis data, the 5minute travel speed collected from the Seoul Transportation Information Center was used, and the analysis section was selected as a part of Gangnam where traffic was congested.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.71-79
• /
• 2011

Traditionally, a dynamic network model is considered as a tool for solving real-time traffic problems. One of useful and practical ways of using such models is to use it to produce and disseminate forecast travel time information so that the travelers can switch their routes from congested to less-congested or uncongested, which can enhance the performance of the network. This approach seems to be promising when the traffic congestion is severe, especially when sudden incidents happen. A consideration that should be given in implementing this method is that travel time information may affect the future traffic condition itself, creating undesirable side effects such as the over-reaction problem. Furthermore incorrect forecast travel time can make the information unreliable. In this paper, a network-wide travel time prediction model under incidents is developed. The model assumes that all drivers have access to detailed traffic information through personalized in-vehicle devices such as car navigation systems. Drivers are assumed to make their own travel choice based on the travel time information provided. A route-based stochastic variational inequality is formulated, which is used as a basic model for the travel time prediction. A diversion function is introduced to account for the motorists' willingness to divert. An inverse function of the diversion curve is derived to develop a variational inequality formulation for the travel time prediction model. Computational results illustrate the characteristics of the proposed model.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.163-174
• /
• 2008

The conventional four-step travel demand model is still widely used as the state-of-practice in most transportation planning agencies even though it does not provide reliable estimates of travel demand. In order to improve the accuracy of travel demand estimation, implementing an alternative approach would be critical as much as acquiring reliable socioeconomic and travel data. Recently, the role of travel demand model is diverse to satisfy the needs of microscopic analysis regarding various policies of travel demand management and traffic operations. In this context, the activity-based approach for travel demand estimation is introduced and a case study of developing a spatial-temporal activity presence-based approach that estimates travel demand through forecasting number of people present at certain place and time is accomplished. Results show that the spatial-temporal activity presence-based approach provides reliable estimates of both number of people present and trips actually people made. It is expected that the proposed approach will provide better estimates and be used in not only long-term transport plans but short-term transport impact studies with respect to various transport policies. Finally, in order to introduce the spatial-temporal activity presence-based approach, the data such as activity-based travel diary and land use based on geographic information system are essential.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.133-143
• /
• 2007

Previous studies on the transit assignment hardly show its achievement in research but have many limitations not only in theory but also in practice. This paper presents an integrated transit assignment model taking into account cost functions of multiple modes, such as auto, bus and subway, which represent an integrated network. An integrated transit network including cost functions and in-vehicle congestion needs to be developed. In addition, a link fare calculation model needs to be developed and applied to the model to calculate path travel costs. Based on these sub-models, a path-based traffic assignment model, which considers in-vehicle congestion and an integrated distance-based fare system in the integrated traffic network, is developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.649-654
• /
• 2008

In the definition of non additive path, the sum of travel costs of links making up the path is not equal to the path cost. There are a variety of cases that non-additivity assumption does not hold in transportation fields. Nonetheless, traffic equilibrium models are generally built up on the fundamental hypothesis of additivity assumption. In this case traffic equilibrium models are only applicable within restrictive conditions of the path cost being linear functions of link cost. Area-wide road pricing is known as an example of realistic transportation situations, which violates such additivity assumption. Because travel fare is charged at the moment of driver's passing by exit gate while identified at entry gate, it may not be added linearly proportional to link costs. This research proposes a novel Wordrop type of traffic equilibrium model in terms of area-wide road pricing schemes. It introduces binary indicator variable for the sake of transforming non-additive path cost to additive. Since conventional shortest path and Frank-Wolfe algorithm can be applied without route enumeration and network representation is not required, it can be recognized more generalized model compared to the pre-proposed approaches. Theoretical proofs and case studies are demonstrated.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.570-579
• /
• 2016

This study proposes a concept of Stepwise Transfer Coefficient(STC) which implies greater transfer cost with increasing the number of transfers. Thus, the public transport information system provides the choice sets of travel routes by the consideration of not only transportation time but also the optimum number of transfers. However, path choice problems that involve STC are found to include non additive cost, which requires additional route enumeration works. Discussions on route enumeration in actual transportation networks is very complicated, thereby warranting a theoretical examination of route search considering STC. From these points of view, this study results in a probability based transit trip assignment model including STC. This research also uses incoming link based entire route deletion method. The entire route deletion method proposed herein simplifies construction of an aggregation of possible routes by theoretically supporting the process of enumeration of the different routes from origin to destination. Conclusively, the STC reflected route based logit model is proposed as a public transportation transit trip assignment model.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.64-78
• /
• 2019

This paper explores key factors affecting taxi travel using global positioning system(GPS) data in Seoul, Korea, considering spatial dependence. We first analyzed the travel characteristics of taxis such as average travel time, average travel distance, and spatial distribution of taxi trips according to the time of the day and the day of the week. As a result, it is found that the most taxi trips were generated during the morning peak time (8 a.m. to 9 a.m.) and after the midnight (until 1 a.m.) on weekdays. The average travel distance and travel time for taxi trips were 5.9 km and 13 minutes, respectively. This implies that taxis are mainly used for short-distance travel and as an alternative to public transit after midnight in a large city. In addition, we identified that taxi trips were spatially correlated at the traffic analysis zone(TAZ) level through the Moran's I test. Thus, spatial regression models (spatial-lagged and spatial-error models) for taxi trips were developed, accounting for socio-demographics (such as the number of households, the number of elderly people, female ratio to the total population, and the number of vehicles), transportation services (such as the number of subway stations and bus stops), and land-use characteristics (such as population density, employment density, and residential areas) as explanatory variables. The model results indicate that these variables are significantly associated with taxi trips.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.45-54
• /
• 2013

Korea Expressway Corporation has been utilizing vehicles equipped with dedicated short range communication (DSRC) based on-board equipment (OBE) for collecting path travel times. A path based method (PBM) estimates the path travel time using probe vehicles traveling whole links on the path, so it is not always possible to obtain sufficient samples for calculating path travel time in the DSRC system. Having this problem in utilizing DSRC for travel time information, this study attempted to estimate path travel time with the help of a link based method (LBM) and examined whether the LBM can be used for obtaining reliable path travel times. Some comparisons were made and identified that the MAPE difference between the LBM and the PBM estimates are less than 3%, signaling that LBM can be used as a proxy for PBM in case of sparse sample conditions. Some limitations and a future research agenda have also been proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1033-1041
• /
• 2017

Path travel time based on departure time (PTTDP) is key information in advanced traveler information systems (ATIS). Despite the necessity, forecasting PTTDP is still one of challenges which should be successfully conquered in the forecasting area of intelligent transportation systems (ITS). To address this problem effectively, a methodology to dynamically predict PTTDP between motorway interchanges is proposed in this paper. The method was developed based on the relationships between traffic demands at motorway tollgates and PTTDPs between TGs in the motorway network. Two different data were used as the input of the model: traffic demand data and path travel time data are collected by toll collection system (TCS) and dedicated short range communication (DSRC), respectively. The proposed model was developed based on k-nearest neighbor, one of data mining techniques, in order for the real applications of motorway information systems. In a feasible test with real-world data, the proposed method performed effectively by means of prediction reliability and computational running time to the level of real application of current ATIS.