• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.497-506
• /
• 2020

A chameleonic surface proposed in this study was a pin-art and 3D display device for generating arbitrary shapes. A smooth and continuous surface was formed using slim telescopic actuators and high-elasticity composite material. Realistic 3D shapes were continuously generated by projecting dynamic mapping images on the surface. A slim telescopic actuator was designed to show long strokes and minimize area for staking. A 3D shape was formed by thrusting and extruding the high-elasticity material using multiple telescopic actuators. This structure was advantageous for generating arbitrary continuous surface, projecting dynamic images and lightening weight. Because of real-time synchronization, a distributed controller based on EtherCAT was applied to operate hundreds of telescopic actuators smoothly. Integrated operating software consecutively generated realistic scenes by coordinating extruded shapes and projecting 3D image from multiple projectors. An opera content was optimized for the chameleon surface and showed to an audience in an actual concert.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.802-810
• /
• 2006

For a thorough train control, the precise train position detection is necessarily required. The widely used current way for train position detection is the one of using track circuits. The track circuit has a simple structure, and has a high level of reliability. However trains can be detected only on track circuits, which have to be installed on all ground sections, and much amount of cost for its installation and maintenance is needed. In addition, for the track circuit, only discontinuous position detection is possible because of the features of the closed circuit loop configuration. As the recent advances in telecommunication technologies and high-tech vehicle-based control equipments, for the train position detection, the method to detect positions directly from on trains is being studied. Vehicle-based position detection method is to estimate train positions, speed, timing data continuously, and to use them as the control information. In this paper, the features of GPS navigation and DR navigation are analyzed, and the navigation filters are designed by constructing vehicle-based train position detection method by combining GPS navigation and DR navigation for their complementary cooperation, and by using kalman filter. The position estimation performance of the proposed method is also confirmed by simulations.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.124-129
• /
• 2006

음악은 소리를 즐긴다는 뜻을 담고 있다. 감상자에게 단순한 청각적 자극을 넘어 즐거움을 주기 위해선 음악적인 경험이 뒷받침되어야 한다. 가상 현실을 이용한 사용자와 시스템 간의 상호작용을 음악 경험 제공에 접목하려는 시도는, 새로운 경험을 통해 일반인들이 보다 쉽게 음악을 접하고 체험함으로써 음악을 통해 즐거움을 얻을 수 있도록 도움을 주는 데에 그 목적이 있다. 가상 오케스트라를 구현하고 지휘 동작을 재현하는 것은 이러한 가능성을 극대화하는 연구이다. 본 논문에서는 가상 오케스트라를 구현하기 위해 필수적인 중간 단계로, 사용자의 지휘 동작을 감지하여 연주의 박자(속도)를 제어하는 지휘 시뮬레이션 시스템을 제시한다. 실제의 지휘 동작을 분석하고, 동작의 변화를 인식하기 위하여 가속도 센서를 이용, 공간상에서 지휘봉의 움직임을 가속도 정보로 수집하여 이에 상응하는 박자의 제어를 구현한다. 사용자의 박자 명시에 따라 변화하는 상하 방향의 가속도를 센서를 통해 전압 신호로 입력 받고, DSP 의 A/D conversion 모듈에서 디지털 신호로 변환, 일정 수준 이상의 신호를 박자 정보로 직렬통신을 통해 컴퓨터에 전달한다. 컴퓨터에서는 Max/MSP를 이용하여 각 박자 사이의 시간 간격을 측정하고 상응하는 MIDI 음악을 재생하는 방식으로 시스템이 구현된다. 기존 연구에서 사용된 CCD 카메라에 의한 Motion Tracking 을 보완하여 동작의 크기에 따라 음량을 조절한다. 본 논문에서 제시되는 시스템은 지휘 동작에서 가장 특징적으로 나타나는 상하 방향의 급격한 가속도 변화를 직접 입력 받기 때문에 기존 시스템에 비해 지휘 동작의 인식 성공률을 높일 수 있으며, 화상 처리 및 계산에 의한 지연을 최소화할 수 있다. 또한, 장치의 규모를 소형화하여 보다 지휘봉의 형태에 가까운 인터페이스를 제공하며, 적합한 응용 콘텐츠를 접목할 경우 게임 컨트롤러로의 발전 가능성이 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.47-57
• /
• 2014

In order to publicly notify the information security (Internet or Cyber) threat level, the security companies have developed the Threat Meters. As the physical security devices are getting more intelligent and can be monitored and managed through networks, we propose a physical security threat meter (PSTM) to determine the current threat level of physical security; that is a very similar compared with the one of information security. For this purpose, we investigate and prioritize the physical security events, and consider the impact of temporal correlation among multiple security events. We also present how to determine the threshold values of threat levels, and then propose a practical PSTM using the threshold based decision. In particular, we show that the proposed scheme is fully implementable through showing the block diagram in detail and the whole implementation processes with the access controller and CCTV+video analyzer system. Finally the simulation results show that the proposed PSTM works perfectly under some test scenarios.

• Management & Information Systems Review
• /
• v.32 no.3
• /
• pp.247-261
• /
• 2013

Recently, the smart phone, a carrying along terminal connection technology such as Galaxytap/iPad etc. evolves, and supply is increasing rapidly, is included for smart phone because various sensor technologies are developed and service application that is acted in terminal with this is accompanied and grow. Continuously 4 generation to 3 Gs, Wibro Wireless network technology of communications a LTE technology from that is constructed, environment for Ubiquitous realization is being constructed fast. Therefore, in this paper it can inquire state of electronic, furniture devices through apartment complex web server and gear that control groove network at smart phone, and control, and confirms home state prevention of crimes state, and video inquiry of position that CCTV is placed in apartment complex was available. And it proposed integrated smart apartment with parking system and medical system using RFID system in ubiquitous environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1196-1206
• /
• 2013

In this paper, based on the information about navigation system of UAV with PTZ camera and 3D topography, algorithm able to show us in real-time UAV's geographical shooting location and automatically calculate superficial measure of the shooting area is proposed. And the method that can automatically estimate whether UAV is allowed to shoot a specific area is shown. In case of an UAV's shooting attempt at the specific area, obtainability of valid image depends on not only UAV's location but also information of 3D topography. As a result of the study, Ground Control Center will have real-time information about whether UAV can shoot the needed topography. Therefore, accurate remote flight control will be possible in real-time. Furthermore, the algorithm and the method of estimating shooting probability can be applied to pre-flight simulation and set of flight route.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.516-525
• /
• 2012

In this paper, an efficient technique for enhancing the QoS of multimedia service for an WiMedia network applying distributed cooperative medium access (D-MAC) protocol is proposed. D-MAC protocol has been proposed to support high-rate Wireless Personal Area Networks (HR-WPANs) by the WiMedia Alliance. Unlike the centralized IEEE 802.15.3 MAC, the D-MAC UWB specified by WiMedia supports all devices to be self-organized and removes the SOP (Simultaneous Operating Piconet) problem, i.e., packet collisions between overlapped piconets in the centralized IEEE 802.15.3 MAC. However the WiMedia D-MAC can't prevent reduce the throughput degradation occurred by mobile nodes with low data rate. Therefore, a distributed cooperative MAC protocol for multi-hop UWB network is proposed in this paper. The proposed technique can intelligently select the transmission path with higher data rate to provide real-time multimedia services with minimum delay, thus enhances QoS of multimedia service.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.37-42
• /
• 2016

In this paper, in today's highly complex video and broadcast operations, broadcasters are constantly challenged to reliably deliver low-latency, high-quality video to multiscreen audiences on-air and online. The Adaptive Bit Rate (ABR) protocols enable internet video to a wide range of multiscreen devices. However, video quality is often marginal and would prove unacceptable for valued linear broadcast content delivered to the Big Screen today. The Media information processing technology advances in ABR enables service providers to take control and offer quality managed linear video services to ALL screens in the home, including the Big Screen, with a single unified IP Video infrastructure. The New Multiscreen-Assisted ABR (MSA-ABR) delivery management system proposed using Cloud based multicast-assisted ABR for a broadcast facility that performs routing of contribution content and online publishing services within a virtual, centralized cloud infrastructure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.739-746
• /
• 2016

The real-time railway safety monitoring and control system is for prevention of safety accidents, and this system adopts DDS (Data Distribution Service) standard based data transmission method to support integrated management of data from existing on-site safety detection devices. In this paper, we introduce the design of DDS-based data specification from on-site signal equipment on the conventional railway. For this, we (1) design UML data model of KRS SG 0062 standard which defines existing data specification, (2) define DDS Topics for DDS transmission and map KRS model to DDS Topic model, (3) suggest data transformation rules and (4) design network control QoS polices. In addition, we analysis actual on-site log data and validate our data specification design. DDS-based data transmission enables data compatibility among on-site devices and the real-time railway safety monitoring and control system, and allows efficient network management for a large amount of data transfer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.515-517
• /
• 2018

Access to public facilities such as substations, dams and railway facilities is strictly controlled, and unmanned surveillance equipment has been introduced and operated recently due to the development of IT technology and the government's cost reduction policy. However, if an unmanned surveillance system is broken, surveillance space, information leakage caused by intruders, and damage to facilities may occur. Also, it is necessary to check periodical visit by the manager in order to check the surveillance facilities, which causes additional management costs. In order to solve this problem, we designed a system to check the operation status of the unmanned monitoring facility in real time, attempt to recover automatically when a problem occurs, and notify the administrator of the problem. The designed system consists of an NVR that receives and judges information such as image, sound, and lighting condition, and a control device that detects and restores the state of the unmanned monitoring facility. The system proposed in this paper is expected to contribute to the improvement of the economic efficiency due to the minimization of surveillance space due to the failure of the unmanned monitoring facility and the reduction of the inspection cost.