• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.560-574
• /
• 2010

Recently, many people can easily contact video telephony service through the mobile terminal owing to the commercialization of 3G communication technology. However, the quality of the serviced video telephony has been not good yet by the actual mobile restrictions. For solving quality problems, this paper presents the design of the object-based video CODEC using hybrid transform in mobile video telephony. The proposed design firstly segment each frame into a significant object and an insignificant object. The proposed design is to improve the quality of a significant object by limiting the bit rate of a insignificant object. Thus, we compress a significant object with high quality and low compression ratio and compress an insignificant object with low quality and high compression ratio. Furthermore, we control the bit rate of the video stream in the limited bandwidth by adjusting the compression ratio of each object. From experimental results, we confirmed that our method has more higher quality than methods in the conventional CODECs at the significant region on the same bit rate.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.481-491
• /
• 2009

In this paper, we proposed a hybrid P2P overlay structure for live media streaming. The proposed structure consists of the mesh overlay organized by peers according to the geographical proximity and similar bandwidth range and the tree overlay formed by the peers for which the stability of participation is approved. The proposed scheme enhances the robustness of tree overlay and the long delay of mesh overlay by intelligently combining the utilization of the tree overlay and the mesh overlay. Furthermore, the peers with a large up-link bandwidth are located near to the media source peer. Therefore, it reduces the height of tree, and as a result, the stream transmission delay. Through simulation, we evaluated the performance of the proposed scheme in terms of scalability and quality of services.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.257-263
• /
• 2012

Smart phones become popular all over the world recently. At the same time, demand of various additional services, such as SNS by utilizing low-cost reliable Wi-Fi network and position information, is expected to keep growing. In this paper, Implementation of SNS based on an Open Wi-Fi & Position Information was proposed. This service is achieved by constructing an Open Wi-Fi network based on a built AP access information database. And in order to provide durable connection in mobile environment, RSS detect AP switching module and mobile IP are utilized in the proposed service. Furthermore, with the utilization of GPS information of AP, AP providers could delivery various information such as advertisements, promotion events. In addition, it is possible for AP users to communicate with each other, thus a position information based SNS was also proposed in this paper.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.99-102
• /
• 2012

The performance of P2P application services may be improved by reducing unnecessary inter-network traffic through intelligent peer selection. However, since a logical link between peers in a P2P overlay network is composed of a set of physical links in an underlay network, the traffic pattern determined by the sending rates of selected peers imposes loads on each underlay links. Thus, if the sending rates are not determined carefully, the loads between underlay links may not be balanced, which means some links are underloaded while the other links are congested. In this paper, we take an optimization approach to determine the sending rates of peers strategically to avoid the inefficient use of underlay links. The proposed scheme also guarantee the minimum receiving rates of peers while minimizing the maximum link utilization of underlay links, which is beneficial both to P2P applications and an underlay network.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.43-72
• /
• 2010

The Korean mobile telecommunication service market is faced with a tremendous competitive period, in which the market is entering into the maturity stage with launching of the 3rd generation service and with introduction of mobile number portability. In general, it is more important to sustain the old customers than to attracting new customers, as the life cycle of an industry is entering the maturity stage in which the growth rate of new customers is decreasing gradually or becoming stagnant. Until now, many researches had tested whether the customer satisfaction and loyalty were the core factors of sustaining customers or not. Also service quality and switching cost were given a remarkable attention for their possibility of exogenous factors, which could exercise effects to customer satisfaction and loyalty. In the same context, mobile telecommunication business has to seek a way to maintain the existing customers instead of promoting new customers. So this study investigates whether the service quality and switching barrier of mobile telecommunication could have effects on the customer satisfaction and loyalty, which are recognized as an efficient means to sustain the current customers. In order to test the hypothesis on the effects of service quality and switching barrier of mobile telecommunication to customer satisfaction and loyalty in Korean telecommunication industry, this study collected the questionnaire response data of students including middle and high school students and undergraduates, who are regarded as the major customers in that mobile telecommunication industry.

• Journal of Internet Computing and Services
• /
• v.1 no.2
• /
• pp.29-37
• /
• 2000

Asynchronous transfer mode is flexible to support multimedia communication services using asynchronous time-sharing and statistical multimedia techniques to the existing data communication area, ATM ABR service controls network traffic using feedback information on the network congestion situation in order to guarantee the demanded service qualities and the available cell rates, In this paper we apply the control method using queue length prediction to the formation of feedback information for more efficient ABR traffic control. If backward node receive the longer delayed feedback information on the impending congestion, the switch can be already congested from the uncontrolled arriving traffic and the fluctuation of queue length can be inefficiently high in the continuing time intervals, The feedback control method proposed in this paper predicts the queue length in the switch using the slope of queue length prediction function and queue length changes in time-series, The predicted congestion information is backward to the node, NLMS and neural network are used as the predictive control functions, and they are compared from performance on the queue length prediction. Simulation results show the efficiency of the proposed method compared to the feedback control method without the prediction, Therefore, we conclude that the efficient congestion and stability of the queue length controls are possible using the prediction scheme that can resolve the problems caused from the longer delays of the feedback information.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.597-602
• /
• 2005

In this study, file size for measurement and the service system's billing data were submitted to a comparative analysis by performing a verification test on the billing system of three major mobile communication services providers, based on the wireless Internet service packet. As shown in the result of the verification test, there were some differences in the billing data due to transmission overhead, according to the network quality that is affected by the wireless environment of mobile operators. Consequently, the packet analysis system was proposed as a means of applying consistent packet billing to all service providers being compared. If the packet analysis system is added to supplement the current billing system various user requirements can be met. Billing by Packet among mobile operators and differentiated billing based on the content value are available, since the packet data can be extracted through protocol analysis by service, and it can be classified by content tape through traffic data analysis. Furthermore, customer's needs can be satisfied who request more information on the detailed usage, and more flexible and diverse billing policies can be supported like application of charging conditions to the non-charging packet handling. All these services are expected to contribute to the popularization of the wireless Internet service, since user complaints about the service charge could be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1930-1936
• /
• 2007

Electronic Navigational Charts(ENCs) are official nautical charts which are equivalent to paper charts with supplementary information. Although their main purpose is to be used for the safe navigation of ships, they also contain much information on coasts and seas which may be interesting to ordinary people. However, there is no easy way to access them because of their specialized data format, access method and visualization. This paper proposes m implementation of SVG for the access and services of ENCs. SVG(Scalable Vector Graphic) makes it possible to make use of Vector graphics for map services in basic internet browsing environment. Implementation of SVG for ENC applications by this research is free of special server side GIS mapping system and client side extra technology. The Implementation of SVG for ENC Applications can be summarized as follows: Firstly, SVG provides spatial information to possess searching engine to embody SVG map. Secondly SVG can provide high-quality vector map graphics and interactive facility without special Internet GIS system. It makes it possible to use services with very low cost. Thirdly, SVG information service targeting on maritime transportation can be used as template, so it can be used dynamically any other purpose such as traffic management and vessel monitoring. Many good characteristics of SVG in mapping at computer screen and reusability of SVG document provide new era of visualization of marine geographic information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.809-819
• /
• 2004

In this paper, in order to exclude the expansion of M/W relay frequency or its new frequency assignment possibly, we analyzed a possibility of substituting M/W system by B-WLL or optical fiber network regarding service quality and economical points. To define the target of service quality, pre-condition and analysis method for the selected media have been derived to compare each other. E1 transmission with BER 10$^{-1}$ was chosen as a reference capacity, and service distance was calculated f3r the selected media as a function of availability. Also from the economical point we considered 3 systems such as optical fiber, M/W, and B-WLL based upon basic system structure, and analyzed them for various line configurations of fiber optic and B-WLL according to service period, system capacity, transmission distance, and data rate. It was confirmed that B-WLL can provide quality of service with 99.999 % availability within 1.6 km cell radius, and for optical fiber substitution, the leased fiber conduit on an electric pole is more economical than M/W system irrespective of service period, but in case of directly digging for underground conduit, it turned out ineffective regardless of cabling duct types.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2021

Requirements engineering can be seen as proceeding with various processes and activities such as extraction, analysis, specification, management, and verification without temporal and spatial constraints in the development environment of information systems that are becoming large and decentralized. Developing requirements well and conducting continuous evaluation and management is the shortcut to success in project management, and it is recognized as a very important matter in relation to requirements in the information system audit. When we conduct information system audit and conducting projects subject to audit, we need to improve the required engineering aspect. Therefore, this study derives inspection items suitable for the target project by referring to the audit inspection manual and audit inspection guide when conducting the current audit, and relates to the required engineering aspect among the contents of the inspection guide for each business type that is the basis for deriving the inspection items were derived for each audit point/audit area for the project management and quality assurance project type corresponding to the inspection items. The suitability of the extracted occupation items was verified through a questionnaire survey by experts.