• Land and Housing Review
• /
• v.15 no.2
• /
• pp.73-87
• /
• 2024

To evaluate the efficiency of commuting patterns, various commuting indicators such as excess commute and commuting potential utilized have been developed and used. It is crucial to calculate these indicators reasonably to reveal the differences in commuting patterns among metropolitan areas and to consider these in the process of formulating commuting policies. However, commuting indicators are generally calculated at the administrative district level, and thus, they are not free from the problem of the modifiable areal unit problem (MAUP). This issue can undermine the rationality of comparing commuting efficiency between metropolitan areas, making it necessary to handle the calculation of commuting indicators carefully. Therefore, this study utilises Monte Carlo Simulation to calculate optimal, actual, and maximum commuting distances, and thereby presents the excess commute and the commuting potential utilized. To apply Monte Carlo Simulation to the context of South Korea, a constrained Monte Carlo Simulation is conducted, where residential and workplace locations used in the simulation are selected based on the actual locations of buildings. The analysis is conducted on 13 metropolitan areas with established metropolitan plans using the 2016 Household Travel Survey data. The commuting indicators calculated through the simulation showed minimal differences compared to the results obtained through conventional methods. The comparison of commuting efficiency among metropolitan areas revealed that even if the degree of spafial balance between residential and workplace locations is similar, the actual commuting patterns can differ significantly. It is suggested that further research considering characteristics such as the area of each metropolitan region will be necessary in the future.

• Journal of the Korean Regional Science Association
• /
• v.37 no.2
• /
• pp.49-61
• /
• 2021

Long-distance commuting is a problem as people living in Gyeonggi-Incheon contitue to commute to Seoul in the Seoul metropolitan area. To solve this problem, policies in the region are aiming for a self-sufficient zone formation plan and a compact city. However, urban problems caused by such long-distance commuting continue. This appears to be due to excessive density and Seoul-dependent networks. However, existing studies have focused on individual cities despite the importance of inter-city interactions, and had limitations in not considering the characteristics of the Seoul-dependent networks. Therefore, the purpose of this study is to empirically analyze the effect of the compactness on commuter travels by comprehensively considering the interactions between cities within the region using multiple regression. As a result of the analysis, it was found that that commuting efficiency increases when a network of more than a certain size is formed, and the results imply that policies should focus on fostering network centers in Incheon and Gyeonggi regions, which are outside the metropolitan area, and consider to expand the transportation networks at the regional level.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.55-60
• /
• 2010

The purpose of this study is to analyze compact city planning indicators that have influence on public transportation commuting of residents in the 54 medium and small-sized cities. In the study, land use and transportation infrastructure of cities and other socio-demographic variables are used as explanatory variables in a causal model. 96,552 subjects from 54 cities in korea are selected as the final sample, and a statistical analysis is carried out by applying Random Intercept Logit Model. Analysis shows that a high level of density and jobs-housing balance in the city results in more public transportation commuting. And higher access to bus and subway station influence commuting, so subway & bus stop are important factors to increase public transportation commuting

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.7-21
• /
• 2007

The purpose of this study is to examine the transportation, equity and efficiency impacts of cordon pricing schemes in the Seoul Capital Region of Korea. Autos would be required to pay a toll of 2.000 Won each time they enter cordons around the CBD or the subcenters during morning peak periods. The imposition of the toll would produce a substantial decrease in traffic volumes within the cordons as well as throughout the Capital Region. The lower the income level of commuters is, the more the share of auto decreases and that of transit increases. For equity impacts, the welfare of commuters would increase or decrease according to the cordon pricing schemes but would produce progressive impacts irrespective of the schemes. However, the commuters who have the highest value of time would experience welfare gains and it would result in regressive impacts. The schemes would result in a substantial net social welfare gain for the efficiency impacts. When the toll is charged at the CBD cordon only, the net social welfare would increase more.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.2 s.36
• /
• pp.77-88
• /
• 2006

Overpopulation has been one of the most serious problem of the Seoul Metropolitan Area (SMA), which consists of the City of Seoul, Incheon, and the whole of Gyeonggi Province. People have been still moving into SMA, especially being concentrated into the fringe of Seoul. This study examines the inner city decline phenomenon of SMA which can be easily found in large cities over the world, based on the demographic data of these area. In addition, this study monitors the imbalance in growing of SMA by analyzing RMI (Rank Mobility Index), and the inverse relation between the self sufficiency of the adjacent area and the commuting rate to Seoul by analyzing commuting data. Even though the total population has been unchanged, the internal change of population was substantial. The growth of Seoul Metro region was placed near the city of Seoul, especially commuter data reassured the population concentrations. The results will be useful in urban planning and growth management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.801-807
• /
• 2008

This study attempts to evaluate and compare the land consumption efficiencies of various urban transport modes, utilizing the time-area method. With the careful considerations of travel conditions and modal characteristics, equations for the computation of time-area for various different modes are derived. With the appropriate assumed values of parameters, time-area consumptions per person per km for each mode both for peak and off-peak situations are computed and evaluated. The relationships between the time-area consumed and operating speed for each mode are graphically demonstrated and discussed. An example of the time-area consumed for a hypothetical commuter round-trip using various modes are also presented in order to clearly show the consumption of parking requirements by specific modes. It shows that regardless of facilities used, auto users are by far the worst in terms of area efficiency and that transit, especially rail rapid transit, is a superior mode. Pedestrian and bicycle, though consuming more than expected, also demonstrate the advantage in case of a short-distance trip in terms of area efficiency compared with the bus transit modes.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.511-524
• /
• 2017

This study aims to evaluate the availability of ABM (Active-Based Model), FEATHERS, as a policy evaluation tool. To achieve the goal, scenario analysis on flexible working policy was conducted to measure its impact on activity-travel behavior. As a consequence, there seems no significant change in worker's daily life, other than mitigating traffic congestion due to decreasing commuting travel in the rush hour. The result of VKT (vehicle kilometers traveled) shows an opposite pattern according to given household/individual constraints. The scenario analysis on telecommuting indicates a decreasing trend in both travel frequency and distance because of the diminished number of commuting trips. As the activity space of telecommuters is shifted to a residential area, there are more short-distance trips by using non-motorized transport, which leads to decrease in VKT (using a private vehicle). Thus, the sensitivity of VKT by population groups varies due to transport mode shift (between personal and another mode) and growing non-work trips (using a private mode). This study found few things. First, it is necessary to evaluate the details of policy impact by population groups since it can be varied depending on household/individual characteristics. Second, the case study shows a promising performance of ABM as policy measurement that provides reality in policy evaluation. Third, ABM allows us to do more accurate analysis (i.e. time-series analysis by population groups) of policy assessment than those of FSM (Four-Step Model). Lastly, a further effort in data collection, literature review, and expert survey should be made to enhance the accuracy and confidence of future research.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1229-1234
• /
• 2009

The rolling stocks of KORAIL are KTX, Saemaulho Multiple Unit(PP), New Electrical Locomotive(DL), Electrical Locomotive(EL), Diesel Locomotive, Metropolitan Commuter Train(CDC), VVVF and Resistance Controlled Multiple Unit, etc. EMU with the maximum speed of 150km/h is under the test run at the moment. Electrical Multiple Units for mainlines with 180km/h speed are supposed to be introduced as a substitute for Saemaulho Multiple Unit which is scheduled to be out of service. But the specification standard for the control board design of train driver's cab does not exist and there is no a study for layout and type of controlling device with driver's ergonomical approach. That's why the types of controller and operating are different from rolling stocks, which has high possibility of driver's human error and needs education whenever a new car comes in. Based on the opinion poll of drivers, design specification of safety engineering and ergonomics for controlling devices and safety facilities can improve exact control for devices and deal quickly with an emergency so as to improve rolling stock safety and operational efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.158-166
• /
• 2018

Contrary to urban development, urban regeneration is a process of land development through conservation, restoration, and management. In particular, ecologically based urban regeneration is an attempt to improve the quality of life in an area, establish a stable settlement space, and revitalize the local economy by considering the ecological environment. In this regard, the objectives of this study were to establish theoretical concepts and analyze the successful foreign cases of ecologically based urban regeneration, and propose a direction of socio-economic regeneration along with the physical-environmental regeneration of urban areas in Korea. The study results suggest the following. First, strategies must be developed to coordinate public transportation, such as buses and subways, by considering the importance of bicycle riders, along with the sustainable-commuting system. Second, both the importance of planning parks and trails around water systems in various scales while maintaining the existing natural environment as well as using natural elements, such as electric vehicles and wind-power generation systems, were emphasized. Third, urban regeneration for increased energy efficiency requires specific architectural planning and facilities. Fourth, education and research for easy access by the public, as well as public-private partnership, will be needed in the regeneration process.