• Title/Summary/Keyword: 톱니파

Search Result 25, Processing Time 0.027 seconds

부유 랑뮤어 탐침법에서 다양한 전압파형에 대한 고조파 전류 특성 연구.

  • Kim, Yeong-Do;Kim, Yu-Sin;Jeong, Jin-Uk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.466-466
    • /
    • 2010
  • 유도결합형플라즈마(ICP)에서 부유 랑뮤어 탐침에 정현파, 톱니파, 사각파, 삼각파 형태의 전압 파형들을 쉬스에 인가하였을 때, 탐침으로 들어오는 고조파전류들의 특성을 넓은 범위에서 연구 하였다. 탐침으로 들어오는 플라즈마전류파형 및 기생전류파형의 모양과 고조파전류들에 대해 고찰하였고, 각각의 전압파형을 인가하였을 때 다양한 압력과 파워조건에서 부유 랑뮤어 탐침법을 이용하여 전자온도와 플라즈마 밀도를 측정하고, 측정결과는 싱글 랑뮤어 탐침법과 비교하였다. 정현파, 삼각파는 싱글 랑뮤어 탐침법과 잘 일치하는 결과를 보였고, 톱니파는 실험상의 오차로 정확한 측정이 안 되었으며, 사각파는 전류파형의 과도현상으로 인해 측정이 안되었다. 그 외에 기존의 부유 랑뮤어 탐침법과 다르게 부유전위의 변화와 제 1 고조파들의 비를 이용해서 전자온도를 구하는 방법도 소개한다.

  • PDF

Design of Single-Inductor Dual-Output Boost-Boost DC-DC Converter with Dual Feedback Loop Based on Relative Sawtooth Generator (Dead-time을 갖는 톱니파 발생기를 이용한 이중 피드백 루프 기반 단일 인덕터 이중 출력 승압형 변압기 설계)

  • Yun, Dam;Kim, Dong-Young;Lee, Kang-Yoon
    • Journal of IKEEE
    • /
    • v.18 no.2
    • /
    • pp.220-227
    • /
    • 2014
  • This paper presents a control method of Single-Inductor Dual-Output DC-DC Converter using Common mode feedback and differential feedback loops. To generate duty used for differential mode feedback loop, this paper propose relative sawtooth circuit using current divider circuit which makes ramp signal with variable dead-time. Two outputs of the Single-Inductor Dual-Output DC-DC Converter are specified for 2.8 V and 4.2 V with input voltage 2.5 V. The maximum conversion efficiency of designed SIDO DC-DC Converter is 95% at total output power of 539mW. Cross regulations of Boost1 and Boost2 are 3.57% and 4% each, when increasing twice times output current.

Current-controllable saw-tooth waveform generators using current-tunable Schmitt trigger (전류-제어 슈미트 트리거를 이용한 전류-제어 톱니파 발생기)

  • Chung, Won-Sup;Lee, Myung-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.7 s.361
    • /
    • pp.31-36
    • /
    • 2007
  • A saw-tooth waveform generator whose frequency can be controlled with a do bias current is proposed. The generator utilizes operational transconductance amplifiers (OTA's) as switching element. It features simple and wide sweep capability The circuit built with commercially avaliable components exhibits good linearity of current-to-frequency transfer characteristics and relatively low temperature sensitivity.

Current-controllable saw-tooth waveform generator using OTA's (OTA를 이용한 전류-제어 톱니파 발생기)

  • 임동빈;정원섭;송재훈;김희준
    • Proceedings of the IEEK Conference
    • /
    • 2001.06e
    • /
    • pp.177-180
    • /
    • 2001
  • A saw-tooth waveform generator with current-controllable frequency is described. The generator utilizes operational transconductance amplifiers as switching element. It features simple and wide sweep capability. The circuit built with commercially avaliable components exhibits good linearity of current to frequency and relatively low temperature sensitivity.

  • PDF

MRSF-PWM Method for Acoustic Noise Reduction of Traction Motor Drive Systems (견인전동기 구동시스템의 소음 저감을 위한 MRSF-PWM 방식)

  • 홍순찬;서영민
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.7 no.3
    • /
    • pp.262-271
    • /
    • 2002
  • In PWM inverters used in traction motor drive systems, the switching frequency is restricted by their large power capacity and thus the electromagnetic acoustic noise is generated. To reduce such an audible noise, the new MRSF-PWM(Modified Random Switching Frequency PWM) method is proposed. In the Proposed MRSF-PWM method, both triangular wave and sawtooth wave are used together as carrier waves for harmonic diffusion and reference wave is generated by injecting 3rd harmonic into the stone wave to expand the linear control region of output voltages. To verify the validity of the proposed MRSF-PWM method, computer simulations are carried out. And the results show that the MRSF-PWM method is more excellent than other RPWM methods in the aspects of both linearity and harmonic diffusion md more effective than SPWM(Sinusoidal PWM) method for the reduction of an audible noise.

Sound Synthesis using Block & Moving Ball (블록과 움직이는 공을 이용한 사운드 신디시스)

  • Chang, Kyu-Sik;Jang, Dong-Hun;Kim, Tae-Yong
    • 한국HCI학회:학술대회논문집
    • /
    • 2007.02b
    • /
    • pp.292-297
    • /
    • 2007
  • 터치스크린을 통한 유저의 입력은 미디신호로 변환되며 생성된 블록은 하나의 음표 또는 다수의 음표로 남게 되며 유저가 설정한 타임라인의 빠르기에 따라 입력된 블록 위치의 음계 값을 토대로 소프트웨어 신디사이저의 오실 레이터에서 생성된 소리를 스피커로 출력해 낸다. 블록은 서로 다른 색깔의 8개의 미디채널로 존재하여 각 채널을 레이어 시켜 다른 블록을 생성하여 사인파, 톱니파, 삼각파, 사각파등을 엔벨로프 변형을 통해 만든 10가지 다른 소리로 지정하여 넣을 수 있다. 미디의 멀티채널방식을 이용해 다중 레이어의 입력방식을 취했으며, 관객은 작곡 모드에서는 일정한 패턴을 가진 단음이나 화성을, 게임모드에서는 생성된 공이 블록을 부딪치며 예측하기 어렵게 생성된 단음이나 화성음을 만들 수 있다. 생성한 음이 재생될 때에는 생성된 음정의 주파수 값과 음량에 따라서 RGB LED 조명이 반응을 하며 유저가 생성시킨 독특한 음악 진행에 따라 조명의 밝기와 색깔이 바뀌게 된다.

  • PDF

A Study on the Comparision of Electron Energy Distribution Function measured by sawtooth and triangle waveform probe bias voltages (톱니파 및 삼각파 프로브 bias 전압에 의해 측정된 전자에너지 분포함수의 비교에 관한 연구)

  • Kim, D.H.;Shin, J.H.;Kim, G.S.;Park, Y.C.;Cho, J.S.;Park, C.H.
    • Proceedings of the KIEE Conference
    • /
    • 1996.07c
    • /
    • pp.1844-1847
    • /
    • 1996
  • In the paper, we have obtained electron energy distribution function (EEDF) in plasma by using two differentiators. In addition, we have investigated the comparision of the EEDFs by sawtooth and triangle waveform voltages. It is found that as pressure is decreased, electron density is decreased, and plasma potential is increased. And as the position of probe moves the outer of plasma, plasma potential is decreased, and electron temperature is decreased.

  • PDF

Oscillation Mode and Electromagnetic Characteristic shape Wave guide (톱니파형 도파관의 발진모드와 전자계특성)

  • Kim, Won-Sop
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.03b
    • /
    • pp.39-39
    • /
    • 2010
  • 낮은 에너지를 이용하여 상대론적 영역에서 동작하는 마이크로파 출력장치를 연구하였다 그에 따른 후진파 발진기는 대전력 마이크로파를 발생시키는 장치로서 연구하였으며 관내에 전자빔을 입사시킴으로서 발진이 일어나 출력을 발생 시킨다.

  • PDF

Numerical study on flux of cohesive sediment by asymmetric oscillatory flow (비대칭 진동흐름에 의한 점착성 유사의 이동량 수치연구)

  • Son, Min-Woo;Jung, Tae-Hwa;Baek, Kyong-Oh;Cho, Sung-Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.505-509
    • /
    • 2012
  • 본 연구의 목적은 천해 환경에서의 파형이 점착성 유사의 이동량에 미치는 영향을 살펴보는 것이다. 이를 위하여 이상적인 진동흐름(Oscillatory Flow)을 가정하고 점착성 유사의 이동에 적합한 1DV 모형을 적용하였다. 이상적인 진동흐름을 가정할 때는 다양한 파형을 고려하기 위해 왜곡되거나 비대칭적인 조건을 적용하였다. 크기와 밀도가 변화하는 점착성 유사의 응집현상을 고려하기 위해 기존에 개발된 응집현상 모형을 1DV 모형에 결합하였다. 2차 스토크스파 조건을 모사하기 위해 왜곡된 진동흐름, 톱니파를 모사하기 위해 비대칭 진동흐름 조건을 선택하였다. 수치모의 결과, 왜곡된 진동흐름 조건에서의 점착성 유사 이동량은 흐름의 왜곡도에 큰 영향을 받는 것으로 나타났다. 반면 가는 비점착성 유상의 경우는 왜곡도와 주목할 만한 관계를 보이지 않았다. 비대칭 진동흐름의 경우는 점착성 유사와 비점착성 유사가 서로 다른 방향을 나타내었다. 앞쪽으로 기운 비대칭 진동흐름 조건에서 점착성 유사의 이동량이 뒤쪽 방향으로 발생하는 반면 비점착성 유사는 흐름이 기운 방향과 동일한 방향으로 유사량을 나타내었다. 이러한 현상의 원인으로는 Phase-lag 효과가 고려되었다. 유사의 침강속도와 농도 프로파일의 변화, 물의 유동 조건 등은 복합적인 상호작용을 통해 Phase-lag 효과를 강화시키고 점착성 유사와 비점착성 유사의 이동량이 서로 다른 특성을 나타내게 하는 것으로 고려된다.

  • PDF

Analysis of PRI Pattern with the Second Deviation of LASER Pulse Train (레이저 펄스열의 2차 차분을 이용한 PRI 패턴 분석)

  • Lim, Joong-Soo;Hong, Kyung-Ho;Jun, Gab-Song;Moon, Sung-Chul;Lee, Chang-Jae;Suh, Suhk-Hoon
    • The Journal of the Korea Contents Association
    • /
    • v.8 no.4
    • /
    • pp.63-70
    • /
    • 2008
  • This paper presents a method of PRI do-interleaving for LASER pulse signals. When the PRI of LASER pulse is periodically changed, the first deviation and the second deviation of TOA is used to calculate the PRI pattern of input LASER signals of receiver. If the standard deviation of the first difference of TOA is less than 5% of the average of the first difference of TOA, the PRI pattern of LASER signal is fixed or jittered type. If the standard deviation is larger than 5% of the average, those are triangular PRI patterns or sawtooth PRI patterns.