Current-controllable saw-tooth waveform generators using current-tunable Schmitt trigger

전류-제어 슈미트 트리거를 이용한 전류-제어 톱니파 발생기

  • Chung, Won-Sup (School of Electronics and Information Engineering Cheongju University) ;
  • Lee, Myung-Ho (School of Electronics and Information Engineering Cheongju University)
  • 정원섭 (청주대학교 전자정보공학부) ;
  • 이명호 (청주대학교 전자정보공학부)
  • Published : 2007.07.25

Abstract

A saw-tooth waveform generator whose frequency can be controlled with a do bias current is proposed. The generator utilizes operational transconductance amplifiers (OTA's) as switching element. It features simple and wide sweep capability The circuit built with commercially avaliable components exhibits good linearity of current-to-frequency transfer characteristics and relatively low temperature sensitivity.

주파수를 직류 바이어스 전류로 제어할 수 있는 톱니파 발생기를 제안하였다. 제안된 발생기는 연산 트랜스컨덕턴스 증폭기 (OTA)를 스위치 소자로 이용하고 있으며, 회로 구성이 간단하면서도 넓은 주파수 스윙 능력을 갖는 특징을 가지고 있다. 발생기 회로를 상용화된 개별 소자들로 구성하여 실험한 결과, 발생기 회로의 전류-대-주파수 전달 특성의 선형성이 우수하고 비교적 낮은 온도 감도를 보인다는 것을 알았다.

Keywords

References

  1. Ashwani Karnal and Krishna Chandra Tripathi, 'A novel automatically synchronized Ramp A/D Converter', IEEE Trans. on Instrum. Meas.., vol. IM-38, pp. 832-834, June 1989
  2. Hiroyuki Torikai and Toshimichi Saito, 'A Multiplex Communication System Using Chaotic Pulse-trains with Sawtooth Control', IEEE International Symposium on Circuit and Systems, pp. 1065-1068, June 1997
  3. H. Kanayama, T. Tsurazawa, N. Mitsumoto, T. Idogaki, and T. Hattori, 'Micromanipulator Utilizing A Bending and Expanding Motion Actuator', Proceeding of IEEE Micro Electro Mechanical Systems Workshop, pp. 244-249, 1997
  4. 'National Operational Amplifiers,Databook,' National Semiconductor Corporation, Santa Clara, CA, 1995
  5. K. Kim, H.-W. Cha, and W.-S. Chung, 'OTA-R Schmitt trigger with independently controllable threshold and output voltage levels', Electron. Lett., vol. 33, pp. 1103-1105, June 1997 https://doi.org/10.1049/el:19970786