• 한국환경농학회지
• /
• 제30권1호
• /
• pp.82-88
• /
• 2011

현재 우리나라에서 널리 이용되고 있는 미생물학적 검사법을 이용하여 TCs 계열의 모화합물과 epimer에 대한 검출 그리고 이를 통한 모화합물과 epimer간의 상대적 생물학적 활성도를 확인하였다. 시험법의 관점에서 낮은 선택성과 낮은 민감도를 나타낸 균주는, 다양한 적용 가능 균주의 발굴 및 적용이 시험법 검증을 통해 이루어질 필요가 있다. 극단적으로 식품 중 epimer만이 잔류하여 미생물 시험에서 의양성이 나올 경우, 기기분석을 통해 확인 정량시 원물질이 검출되지 않는다면, 이는 분석화학과 독성학의 과학적 지식을 바탕으로 볼 때 제도적 맹점으로도 남을 수도 있다. 그리고, 현행 우리나라의 모화합물에 국한 된 잔류허용 기준은 활성이 있는 epimer나 대사산물까지 확대하여 검토 해 볼 필요가 있으며, 이는 최근 의약품류의 환경 중 잔류실태 조사, 환경 중 위해성 평가 및 관리를 위해서도 관리 대상물질을 과학적 근거에 따라 제시해 주는 중요한 자료가 된다.

• Journal of Periodontal and Implant Science
• /
• 제23권2호
• /
• pp.203-218
• /
• 1993

This study was designed to examine the effect of tetracycline application to the planed periodontal surgery of the experimentally induced periodontal disease in dogs. Modified Widman flap surgery was done and aqueous tetracycline (1%) was applied to the root surface for 5min, after which the wound was rinsed with saline, and flaps were coronally repositioned. Root surface ntoches were used as reference points. The animals were sacrificed 1 week, 2 weeks, 4 weeks, and 8 weeks after surgery, and block sections of tooth and surround tissue were processed for conventional light and electron microscopy. The results were as follows : 1. A more coronal position of junctional epithelium was observed in the area treated with tetracycline. 2. In the most of the tetracycline - treated teeth, the new collagen fibrils of connective tissue were oriented vertical/or oblique and parallel to the root surface. The vertical or oblique fibers were inserted into the denuded dentin matrix and contacted with exposed dentin collagen fibrils. 3. In the tetracycline - treated root, new cementum apposition, most of acellular extrinsic fiber cementum, was seen with bundles of oriented collagen fibrils incoporating into the cementum. 4. In the control and tetracyclin - treated teeth, bone resorption was observed at the alveolar crest in the 1 week groups.

• 한국동물위생학회지
• /
• 제28권3호
• /
• pp.203-213
• /
• 2005

Oxytetracycline, tetracycline, chlortetracycline and doxycycline in honey were separated by solid phase extraction (SPE) and determined with high performance liquid chromatography (HPLC) with UV/Visible detector. Analysis was carried out using following conditions: XTerra $C_8$ column $(3.9\times150mm\;i.d. 5{\mu}m)$, mobile phase composed of 0.01M oxalic acid : methanol : acetonitrile (820 : 80 : 100, v/v/v), isocratic pump at a flow rate of 0.9 ml/min. and $50{\mu}l$ of injection volume, UV/Visible detector with wavelength of 360nm. The calibration curves of four tetracyclines showed linearity $(\gamma^2>0.999)$ at concentration range of $100\~1,000 ng/ml$. The recoveries in fortified honey represented more than $70\%$ with low coefficient of variation $(<10\%)$ for concentration range of four tetracyclines. The detection limits for oxytetracycline, tetracycline, chlortetracycline and doxycycline were 13.8, 14.6, 26.2 and 24.9ng/g in acacia honey. respectively. We also monitored tetracyclines residue in domestic honey [n : 38, acacia (20), wild flower (18) ] and foreign honey [n=22, legally distributed (13), illegally distributed (9)] using modified Charm II screening and HPLC confirmation methods. Seven of the 60 samples $(11.7\%)$ were suspect positive using modified Charm II screening test. Chlortetracycline residue was found in one foreign honey (illegally distributed) tested at concentrations of 0.22 ppm. Conclusively, for more effective control of tetracyclines used in beekeeping should be further survey for residues in honey and also national guidelines (maximum residue limit : MRL) and methods should be obligatory.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.705-716
• /
• 2006

The present study was performed to evaluate the effect of tetracycline-HCl on the change of implant surface microstructure according to application time. Implant with pure titanium machined surface, GBA surface and RBM surface were utilized. Implant surface was rubbed with 50mg/ml tetracycline-HCl solution for ${\frac{1}{2}}$min. 1min. $1{\frac{1}{2}}$min. 2min. and $2{\frac{1}{2}}$min. respectively in the test group. Then, specimens were processed for scanning electron microscopic observation. The results of this study were as follow. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two group. 2. In GBA surfaces, control group exhibit many porous depression, and each depression were divided by strict border. Experimental group applied with tetracycline-HCl for 2min. were similar with control group. But when applied for $2{\frac{1}{2}}$min. surface alteration and border breakdown started, resulting enlargement of the porous depression. 3. In REM surface, control group exhibit rough, uneven surface with crater-like depression can be found. The surface alteration started when tetracycline-HCl was applied for 30sec. resulting breakdown of the crater-like depression. Depression became larger as applying time increased.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.731-744
• /
• 2006

The present study was performed to evaluate the effect of tetracycline-HCl on the change of implant surface microstructure according to application time. Implant with pure titanium machined surface, HA-coated surface and dual acid etched surface were utilized. Implant surface was rubbed with $50mg/m{\ell}$ tetracycline-HCL solution for ${\frac{1}{2}}$min., 1min., $1{\frac{1}{2}}$min., 2min., and $2{\frac{1}{2}}$min. respectively in the test group. Then, specimens were processed for scanning electron microscopic observation. The results of this study were as follows. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In HA-coated surfaces, round particles were deposited irregularly. The roughness of surfaces conditioned with tetracycline-HCL was lessened and the cracks were increased relative to the application time. 3. The etched surfaces showed the honey comb structures. The surface conditioning with tetracycline-HCI didn't influence on its micro-morphology. In conclusion, the detoxification with $50mg/m{\ell}$ tetracycline-HCI must be applied respectively with different time according to various implant surfaces.

• 미생물학회지
• /
• 제26권3호
• /
• pp.173-180
• /
• 1988

염색체 유전자를 전달시키기 위한 기초작업으로 RP4 :: Mu cts와 RP4 :: mini-Mu 잡종 플라스미드를 접합에 의하여 E.. coli로 부터 Pseudomonas로 전달시켰다. RP4::Mu cts와 RP4:: mini-Mu의 수용세포는 플라스미드를 가지지 아니하는 Pseudomonas 균주들의 항생세 내성, 탄화수소 자화능 등의 유전적 지표를 조사하여 사용하였다. RP4::mini-Mu는 1$10^{-2}$ - $10^{-4}$의 빈도로 전달되었으며 RP4:: Mu cts는 Pseµdomonas aeruginosa KU557로는 $10^{-2}$의 빈도로, 그 이외의 수용세포로는 10?7의 빈도로 천달되었다. 접합체에 전달된 플라스미드의 존재는 암피실린, 카나마이신, 테트라싸이클린에 대한 내성과 전기영돔에 의해 확인하였으며 특히 RP4::Mu cts는 $43^{\circ}C$에서의 플라크 행성으로도 확인하였다. 접합체들로 부터 생성된 Mu 파아지는 약 $10^{5}$의 P.F.U.를 나타냈으며 전달된 RP4:: Mu cts와 RP4:: mini-Mu는 접합체들에서 비교적 안장한 것으로 밝혀졌다.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.121-134
• /
• 2000

Root conditioning has introduced to dissolve the smear layer and to produce surface demineralization, resulting to exposure of dentin collagen fibril and opening of dentinal tubules. The purpose of the present study was to examine the effect of different concentration and application time of tetracycline-HCL on root conditioning. Total 40 root specimen were prepared from 20 periodontitis-prone human single rooted tooth. The specimen were treated with tetracycline-HCL solution(20mg/ml, 50mg/ml, 100mg/ml)for 20 sec, 3 min, 5 min., and saline for 30 sec. The application method was rubbing method with cotton pellet. Under the scanning electron microscopy(20KV), the extent of smear removal and opening of the dentinal tubules were examined at x 3000. The following results were obtained. 1. Treatment of root specimen with saline did not remove the smear layer and open the dentinal tubules. 2. Treatment of root specimen with different concentration of tetracycline-HCL for 20 sec also did not remove the smear layer completely. 3. Treatment of root specimen with different concentration of tetracycline-HCL for 3 min opened the dentinal tubules and removed smear layer. 4. Treatment of root specimen with 50mg/ml of tetracycline-HCL for 3 min showed collagen fibril within the opened dentinal tubules. In conclusion, the effect of root conditioning with tetracycline-HCL is more dependent on the application time than the application concentration. Root conditioning with 50mg/ml tetracycline-HCL for 3 min is enough for obtaining the periodontal regeneration.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.251-263
• /
• 2007

The present study was performed to evaluate the effects of Tetracycline-HCI on the microstructure change of SLA implant surface according to application time. In the Tetracycline-HCI group, 6 implants were rubbed with sponges soaked $50mg/m{\ell}$ Tetracycline-HCI solution for O.5min., lmin., 1. 5min., 2min., 2.5min. and 3min. In the saline group. another 6 implants conditioned with sponges soaked saline using same methods. One implant wasn't conditioned anything. Then, the changes of surface roughness values were evaluated by optical interferometer & specimens were processed for scanning electron microscopic observation. The results of this study were as follows: 1. In both Tetracycline-HCI group & saline group, there are no significant differences between surface roughness values before & after surface detoxification. And in scanning electron microscopic observation. there are slightly changes of implant surface structures but this changes were not significant by comparison with no treatment implant surface. 2. In the changes of surface roughness values & the scanning electron microscopic observation, there were no significant differences between saline & Tetracycline-HCI groups. In conclusion, the detoxification with $50mg/m{\ell}$ Tetracycline-HCI within 3 minutes can be applied for treatment of peri-implantitis in SLA surface implants. without surface microstructure changes.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.265-275
• /
• 2007

The present study was performed to evaluate the effect of Tetracycline-HCI on the change of implant surface microstructure according to application time. Implants with thermal dual acid etched surface were utilized. Implant surface was rubbed with $50mg/m{\ell}$ Tetracycline-HCI solution and sterilized saline for O.5min, 1min, 1.5min, 2min, 2.5min and 3min. respectively in the test group. Then, specimens were processed for scanning electron microscopic observation and measured surface roughness by optical interferometer. The results of this study were as follows. 1. The thermal dual acid etched surfaces showed many small peaks and valleys distributed overall surface. 2. The surface conditioning with Tetracycline-HCI and saline didn't influence on its micromorphology. In conclusion, the implant with thermal dual acid etched surface has a protective micromorphology from the detoxification with $50mg/m{\ell}$ Tetracycline-HCI and a scrubbing with cotton pellet. Therefore, the detoxification with $50mg/m{\ell}$ Tetracycline-HCI is an effective method for peri-implantitis in case implants with thermal dual acid etched surface.

• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.333-344
• /
• 2001

The present study was performed to evaluate the effect of tetracycline - HCl on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface and titanium plasma-sprayed surface were utilized. Implant surface was rubbed with 50mg/ml tetracycline - HCl solution for 1 min., $1\frac{1}{2}\;min$., 2 min., $2\frac{1}{2}\;min$. and 3min. respectively in the test group and with saline for 1 min. in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. Pure titanium machined surfaces conditioned with saline for 1 min., showed a few shallow grooves and ridges and were less irregular. 2. Pure titanium machined surfaces conditioned with 50mg/ml tetracycline - HCl solution showed more irregular and corrosive surfaces compared to the control group irrespective of the application time of tetracycline - HCl solution. 3. Titanium plasma-sprayed surfaces conditioned with saline for 1 min., were deposited with round amorphous particles and showed round or irregular pores that can be connected to each other. 4. The irregularity of titanium plasma-sprayed surfaces conditioned with 50mg/ml tetracycline - HCl solution was lessened and the flattened areas were wider relative to the application time of tetracycline - HCl solution. 5. Titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution for 1 min. and $1\frac{1}{2}\;min$. were very similar to that of the control group, but the surfaces conditioned for 2 min., $2\frac{1}{2}\; min$. and 3 min. were changed. In conclusion, pure titanium machined surfaces were changed irrespective of the application time of tetracycline - HCl solution. And titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution began to be changed from $1\frac{1}{2}\;min$. This results will be applicable to the regenerative procedures for peri-implantitis treatment.