• Journal of the Korean Society for Library and Information Science
• /
• v.15
• /
• pp.7-44
• /
• 1988

The purpose of this paper is to in vestigate a relative effectiveness of instruction among such three orienting methods as lecture, slide-tape and video-tape which the library of Duk Sung Women's University has applied for orienting the freshmen for the last three years. This research also carried out a sample survey by distributing uniform questinnaire to the three different groups of the students. Each group was oriented with lecture, slide-tape and Video-tape respectively. Finally, the empirical findings of this research are as follows: 1. All three orienting methods were useful for students to improve knowledge as to how to use the library, 2. There were a wide difference in effectiveness among three instructional methods, obviously, the slide-tape method was more effective in the orientation than the lecture method and, furthermore, the video-tape was more effective than the slide-tape one, Therefore, it seem safe to conclude that the media utilization effective in orientation program should be encouraged by the university libraries of Korea.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.17-22
• /
• 2006

Surface modifications like rib-roughening and displaced insert devices like the twisted tape are commonly used in applications such as compact heat exchangers and cooling systems. In this paper, regionally averaged heat transfer distributions in square channels with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. Each wall of the square channel is composed of isolated aluminum sections. Regionally averaged Nusselt number and channel averaged Nusselt number in turbulent air flows are presented for Reynold numbers from 8,900 to 29,000. We have obtained the following conclusions from the experimental study: 1) The local Nusselt number in the two-sided heated case is higher than that in the four-sided heated condition. 2) In the 4 heating wall channel with twisted tape inserts, Nusselt number based on bottom wall temperature is enhanced by 1.2 - 1.6 times if adding the axial interrupted ribs on the bottom wall only. 3) The twisted tape with interrupted ribs under the two-sided heating condition produces the highest heat transfer coefficient.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.184-184
• /
• 2008

저온 동시 소성 세라믹(LTCC, Low Temperature Co-firing) 기술 중에서 테이프 캐스팅(tape casting)은 얇고 균일한 세라믹 그린 쉬트를 연속 성형할 수 있으며 성형된 쉬트의 밀도, 표면상태, 두께제어 등이 매우 중요하다. 얇고 균일한 세라믹 그린 쉬트를 제작하기 위해서 슬러리의 분산성과 레오로지 특성은 매우 중요한 요소이며 첨가되는 유기물 첨가제들의 종류와 함량비는 슬러리의 분산성과 점도에 큰 영향을 미친다. 본 연구에서는 유기물 첨가제의 종류와 함량에 따른 슬러리의 점도와 그린 쉬트의 밀도 및 두께 제어에 미치는 영향을 고찰하였다. 바인더로는 acryl, polyvinyl 계를 사용하였으며, 가소제는 glycol, phatalate 계를 사용하였다. 각각 2 종류의 바인더와 가소제의 함량에 따른 레올로지 거동과 그런 쉬트의 밀도를 측정하였다. 각 조성별로 준비된 슬러리를 사용하여 테이프 캐스팅 방법으로 제작된 그린 쉬트의 두께를 측정하여 유기물 첨가제 조성이 그린 쉬트의 두께제어에 미치는 영향을 평가하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.132-138
• /
• 2006

A tape feeder is an important part to supply a micro chip such as 1005 and 0603 components in SMT process. Traditional sprocket wheel type feeder has several problems such as backlash and indexing errors, low compatibility and confidence. However, it is very difficult to solve such problems due to the inevitable fraction defectives of sprocket wheel. Thus, the object of this works is to develop a linear type high precision tape feeding system using cam-slider mechanism. The proposed cam-slider mechanism is composed of several links and a plate, pneumatic actuator is used to generate linear motion. The proposed mechanism has distinct advantages over the conventional mechanism. It has reduced feeding errors, long lift-cycle, and slim width. As a result, the developed tape feeder using cam-slider mechanism shows special characteristics far high precision feeding for chip-mounters.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.798-799
• /
• 2008

초전도전력케이블에서 교류손실은 케이블의 효율을 저하시킬 뿐만 아니라 냉동기비용 증가로 인한 기존 케이블과의 가격경쟁에서 경제성을 저하시키는 주된 요인으로 작용하기 때문에 이의 상용화에 앞서 교류손실에 대한 정확한 규명이 되어야 한다. 그러나 다수본으로 구성되는 단층원통형의 고온초전도전력케이블에서 교류손실을 올바르게 평가하는 것은 테이프의 상이한 임계전류, 전압리드의 배열, 전류분포의 불균일성 및 인접한 테이프에 흐르는 전류위상 상이 등 복잡한 영향인자 때문에 매우 난해하다. 본 연구에서는 고온초전도전력케이블과 같은 단층원통형 고온초전도도체를 제작하여 실험적으로 교류손실 특성을 규명하였고, 또한 전류용량이 교류손실 특성에 미치는 영향을 실험적으로 조사하였다. 결과 원통형 고온초전도도체에서 교류손실 특성은 전류용량보다는 임계전류밀도에 더 의존하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.117-120
• /
• 2008

Numerical simulations and experiment of a hydrodynamic and thermally developed turbulent flow through square ducts (3.0 ${\times}$ 3.0 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are conducted to investigate regionally averaged heat transfer and friction factors. Turbulent swirl flows having Reynolds numbers ranging from 8,900 to 29,000, a rib height-to-channel hydraulic diameter(e/D$_h$) of 0.067, and a length-to-hydraulic diameter(L/D$_h$) of 30, are considered. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape has 0.1 mm thick carbon steel sheet with diameter of 2.8 cm, length of 90 cm, and 2.5 turns. Each wall is composed of isolated aluminum sections, and two cases of surface heating are set. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and square ducts with twisted tape inserts plus interrupted ribs produces the best overall transfer performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.177-183
• /
• 2006

A tape feeder is an important feeding device to supply micro-chips such as 1005 and 0603 components to PCB in SMT process. Traditionally, tape feeding methods using sprocket wheel mechanism has been used for the pickup system of chip-mounters. However, there is growing needs for new feeding mechanism with high accuracy and confidence as electric components are getting much smaller. Thus, recently, a tape feeder using cam-slider mechanism is developed to meet such requirements. The major advantages of developed system are; significantly reduced indexing and backlash errors, slim and compact design, and improved repetitive capacity compared to existing system. In this paper, the performance evaluation criteria for the developed tape feeder are suggested. Stability against induced vibration, positioning accuracy, cycle time, durability and supply error rate are estimated using developed self testers. As a result, the excellence of developed tape feeding mechanism is validated using the effective rating methods.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.79-86
• /
• 2008

This paper proposed the appropriate installation angle of skewed sensors for measuring vehicle wandering data, which are collected to figure out the location of dynamic weight of a moving vehicle on roadways. We developed a device using tape-switch sensors and a computer program and collected vehicle wandering data with the device and probe vehicles. As a result, the steeper the skewed sensor was installed, the lower the error was shown. However, we could not collect proper data when a skewed sensor was set up higher than $30^{\circ}$ due to tandem axle. Therefore, this study suggested the appropriate angle of skewed sensors as a degree of $20^{\circ}$ to $25^{\circ}$ for gathering wandering data.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2003

This study is a research on character recognition based on image processing, using only color tape to mark guidelines instead of magnetic tape or electric wire used by existing AGV. AGV must follow given courses, and stop recognizing signs such as marks and numbers that indicate destinations. In this study. marks to stop AGV employed blue characters of the same font and size as those of number plates. Yellow driving lines and blue numeric characters were marked in corridors. AGV ran ing the characteristics of colors and detecting lines, and temporarily stopped recognizing numbers of 100％ through DP pattern matching. This study presented the image processing technique and the result of operating AGV.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.359-361
• /
• 1998

MIDAS-II(Multiuser Index-based Data Access System II)는 한국전자통신연구원에서 개발한 바다 DBMS의 저장 시스템이다. MIDAS-II에서 데이터의 논리적 저장 단위인 파일을 저장하는 디스크 영역을 볼륨(volume)이라 부른다. 본 논문에선,s MIDAS-II가 대용량 멀티미디어 데이터 서버의 저장 시스템으로 가능하도록 광 디스크 쥬크박스 또는 테이프 라이브러리와 같이 복수 개의 자장매체(platter, 예를 들어 디스크 또는 카트리지 테이프)로 구성된 Tera 바이트 급의 3차 저장장치를 장착할 경우 이를 위한 볼륨 구조를 제안한다. 제안된 볼륨 구조에서는 3차 저장장치를 활용할 경우 발생되는 성능 저하를 극복하기 위하여 디스크 캐쉬 영역을 두고 있으며, 이를 활용하여 3차 저장장치에 저장된 데이터를 읽지 전용 모드로 검색하는 것 뿐 아니라 LOB을 비롯한 새로운 데이터를 생성하여 3차 저장장치에 저장하는 과정을 모두 효율적으로 지원한다. 그리고, 응용 프로그램에게 볼륨이 저장된 저장장치에 대한 투명성을 제공하기 위하여 기존 MIDAS-II API를 그대로 유지하였으므로 기존의 디스크 볼륨과 제안된 3차 저장장치 볼륨이 모두 기존 API를 통해 접근이 가능하다. 또한, 3차 저장장치의 각 저장매체로서 WORM의 사용도 가능하며, 각 저장매체는 데이터와 해당 메타 데이터를 함께 저장하여 저장매체로서의 독립성을 지니게 됨으로써 개별적으로 저장장치에/로부터 삽입/제거할 수 있게 하였다