• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.193-198
• /
• 2000

The small punch test have been developed to evaluate the material strength of the power plant components. This small punch test specimen is very small than the conventional strength test specimens. Korea Electric Power Research Institute (KEPRI) have been applying this test to assess accurately the life of thermal power plant and enhancing the reliability. The small punch test for gas turbine blades is under development. It's possible to compare the relative strength among the same materials having different operation histories. In this paper, the strength reductions of gas turbine materials are investigated by the small punch tests. All materials shows the almost same strength and deformation with the allowable deviation. At the same test temperature, the damaged material has the maximum load value. The strength reduction is not shown in this small punch test results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.430-435
• /
• 2003

Detailed heat transfer coefficient distributions on a gas turbine blade tip were measured using a hue-detection base transient liquid crystals technique. The heat transfer coefficients on the shroud and near tip regions of the pressure and suction sides of a blade were also measured. Both plane tip and squealer tip blade were considered. The heat transfer measurements were taken at the three different tip gap clearance of 1.0%, 1.5%, and 2.5% of blade span. Results show the overall heat transfer coefficients on the tip and shroud with squealer tip blade were lower than those with plane tip blade. However, the reductions of heat transfer coefficients near the tip regions of the pressure and suction sides were not remarkable.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.107-112
• /
• 2010

A gas turbine consists of an upstream compressor and a downstream turbine with a combustion chamber, and also the compressor and the turbine are generally coupled using a single shaft. Large scale gas turbine compressor is designed as multi-stage axial flow and the blade is fan-type which is thick and wide. Recently radial cracking happens occasionally at the compressor blade tip of large scale gas turbine. So, FEM was performed on the compressor blade and vibration modes and dynamic stresses were analyzed. According to the analysis, 9th natural frequency mode of the blade, which is 2 strip mode, is near the vane passing frequency by the vane located at the upstream of the blade.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.433-438
• /
• 2011

Doosan has been developing a 5MW class gas turbine engine, DGT-5. Campbell diagram has been used for prediction of possible occurrence of resonances of rotating machinery. The Campbell diagram consists of blade natural frequency and excitation frequency. In this paper, modal characteristics of compressor and turbine blades are investigated and Campbell diagram is obtained. We calculated compressor and turbine blade's natural frequency using ANSYS tool. The result has been verified through test.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.170-177
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1040-1043
• /
• 2006

Every mechanical system has a series of natural frequencies at which it will vibrate and to which it will respond if an external stimulus or excitation at this frequency is applied. Vibration is not of itself dangerous, and is always anticipated in an operating unit. However, if the frequency of operation is coincidental with one of the natural frequency of the blade system or the blade has a natural frequency near coincide with the exciting stimulus, then the amplitude of vibration of the blade may increase to the destructive damage can result. In this paper We investigated damage of blade when turbine operated.

• 한국유체기계학회 논문집
• /
• 제16권6호
• /
• pp.26-31
• /
• 2013

Last blades of low-pressure turbine in nuclear power plant are the highly damaged part and always suffered from different types of loadings leading to various stress components, stresses due to centrifugal force and steam flow loading. Especially, centrifugal stress generated by turbine rotation is one of the main problems and more significant than other stresses as they have the greatest effect on total stress. Therefore, this study was performed to obtain the important information for estimation model development of the blade centrifugal stress level and distribution.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.23-30
• /
• 2003

본 연구는 풍력발전 시스템에 관련된 IEC61400-1 국제규격 및 GL규격에 정의된 다양한 하중조건을 고려하였고, 이러한 하중들을 효과적으로 견딜 수 있는 특별한 복합재 구조형상을 제안하였다. 복합재 풍력터빈 블레이드 주고에 대한 평가를 위해 유한요소 구조해석을 수행하였다. 구조설꼐에서는 파라미터 분석 연구를 통해 블레이드 구조형상을 결정하였고, 대부분의 주요 설꼐 피라미터를 결정하였다. FEM을 이용한 응력해석결과를 검토하여 설계된 블레이드 구조는 어떠한 하중조건에 대해서도 안전함을 확인하였다. 뿐만 아니라, 본 연구에 의해 새롭게 고안된 삽입볼트를 사용한 허브 연결부의의 설계하중과 피로하중에 대한 안전성을 검토하였으며, 잘 알려진 S-N 선형 손상 이론, 하중 스펙트럼 및 Spera의 실험식에 의해 20년 이상의 피로수명을 갖도록 하였다. 몇 개의 집중하중으로 모사된 공력하중에 대한 실물 정적구조시험을 수행하였으며, 실험결과로부터 설계된 블레이드는 구조적으로 안전함을 확인하였다. 더욱이, 변위 및 응력, 중량, 무게중심 증의 측정된 결과는 해석결과와 일치함을 확인하였으며, 연구된 블레이드는 독일의 국제적 인증기관인 GL사의 인증을 획득하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.78-84
• /
• 2013

이 논문은 수직축 헬리컬 풍력터빈을 이용한 360 W급 풍력터빈나무(wind turbine tree)를 개발하는데 목적이 있다. 설계를 수행한 100 W 급 헬리컬 풍력터빈을 공력해석을 통해 성능을 예측하였다. 풍력터빈 1개의 성능 분석을 한 후 하나의 풍력단지와 같이 하나의 풍력터빈 나무에 4개의 풍력터빈을 설치하여 유동해석 시 출력의 변화를 확인하였다. 본 연구의 결과로부터 수직축 헬리컬 풍력터빈 나무의 결과를 속도분포와 압력분포로 도출하였고, 수치해석으로부터 정격출력 360 W 이상을 확보할 수 있음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.410-415
• /
• 2004

To ensure a safe operation of the prototype KGT-74 kW small gas turbine, vibrational reliabilities of the compressor 1st, 2nd, and 3rd stages and turbine blades have been estimated and reviewed. FE analyses have been carried out to obtain the natural vibration characteristics of the blades, and impact modal testings have been performed on every each one of the blades to measure their 1st natural frequencies. Then, the Campbell diagram analyses have been carried out to judge the safety of the blades from resonant failures up to 6k harmonics. Results show that the compressor 1st stage blade is exposed to a potential resonant failure with 3k harmonic around a rated speed of 30,000 rpm but that the other compressor 2nd and 3rd stages and turbine blades are safe from resonant failures. Finally, 27,900 rpm is selected as the safe operation limit for the KGT-74 ㎾ gas turbine relative to the blade vibrations.