• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.4
• /
• pp.588-594
• /
• 2009

The maximum power point operation point(MPPOP) of photovoltaic(PV) power generation systems changes with varying atmospheric conditions such as temperature, solar radiation. For achieving a high efficiency in PV system, it is very important for PV system to track the MPPOP correctly according to operation condition. Although the MPPT(maximum power point tracking) algorithm which applied P&O(Perturbation & Observation) or IncCnd(Incremental Conductance) algorithm tracks the MPPOP efficiently, its efficiency drops noticeably in case that the incidence angle of PV panel on buoy changes rapidly. To solve this problem, this paper proposes maximum power point searching and tracking algorithm(MPPST). The proposed algorithm set the specific area and measures the PV voltage at the same interval. The proposed algorithm have been obtained high efficiency than P&O algorithm through ocean experiment.

• Solar Energy
• /
• v.17 no.3
• /
• pp.35-41
• /
• 1997

An experimental study was carried out in a vertical channel with square heat source by visualization equipment with laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two-frame grey-level cross correlation algorithm. Heat source was uniform heat flux(5W). The obtained results show various flow patterns such as the kinetic energy distribution and the turbulent kinetic energy distribution.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.113-118
• /
• 2012

The photovoltaic is one of the most important sustainable technologies appliable to architectures. The power performance mainly depends on the installation conditions of them. This study aims to evaluate the power performance of photovoltaic system by the installation conditions, the tracking methods and reflecting mirrors. For the study, the Solar Pro computer simulations have been conducted on installation angles, solar azimuth and solar altitude. Also, the field mock-up tests are performed to of its application to verify the simulation results. Both the results of the experiment and the simulation have proved that the efficiency of 90-degree fixed angle method was higher than that of 30-degree fixed angle, the efficiency of altitude tracking was better than that of azimuth tracking method, and changing both the altitude and the azimuth together is more efficient rather than the shortened tracing way. In addition, the light-concentrating method in which the incidence angle of the sun is controlled by an adhered reflector has been analyzed to have better efficiency than the general method of tracing according to the orbit of the sun. Therefore, this thesis is expected to offer the basic data to set a more effective tracing-type of photovoltaic power generation system in the future. For this, more researches are to be conducted hereafter on a high efficiency drive motor and the establishment of an economic system.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.82-90
• /
• 2013

Concentration errors critically affect the performance of solar concentrator, so their evaluation is important to the concentrated solar power technology. However, the evaluation is very challenging because error sources are various and not easy to measure individually. Therefore, the integrated effect of concentration errors is often more interesting and useful for large-scale applications. In the present work, we analytically investigate and classify various concentration error sources and then explain that the effect of various concentration errors can be represented in terms of a root mean square value of reflector surface slope error. We present an indirect approach to assessing the reflector surface slope error by comparing solar flux measurement data with modeling calculations. We apply the approach for solar furnaces with different thermal capacity and investigate its advantages and disadvantages.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.1038-1040
• /
• 2022

지속적인 지구 평균 기온 상승으로 인해 우리나라를 포함한 전 세계적으로 탄소중립을 위한 혁신이 이루어지고 있다. 본 연구는 해양수산부 '해양수산분야 2050 탄소중립 로드맵'의 기준에 따라 에너지 자립률을 극대화하고 효율을 최적화시킨 제로에너지 탄소중립 건축물을 제시한다. 태양광 발전 시스템에서, 패널의 태양 일주추적 기능을 통해 에너지 발전률을 극대화하고, 패널 하향정렬 및 딥러닝 모델을 통해 유지 보수를 용이하게 하여 성능 저하를 예방한다. 폐열을 이용한 열 회수/바이패스 환기 시스템을 통해 에너지 효율을 최적화하고, 온/습도에 가중치를 부여하여 모호했던 환기 시스템 결정 기준을 에너지 효율화에 맞게 최적화해 제시한다. 탄소중립 BEMS 기능이 내재된 앱 개발로 위의 건축물 시스템을 제어·관리한다. 본 연구를 통해 제로 에너지 건축물으로서 항만 건물의 가능성을 제고하고, 탄소중립 항만의 구현을 기대한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.41-48
• /
• 2009

This paper presents an Neural Network(NN) controller for Maximum Power Point Tracking (MPPT) of PV supplied DC motor. A variation of solar irradiation is most important factor in the MPPT of PV system. That is nonlinear, aperiodic and complicated. NN was widely used due to easily solving a complex math problem. Proposed photovoltaic system consists of NN, DC-DC converter, DC motor and load(cf, pump). NN algorithm apply to DC-DC converter through an Adaptive control of Neural Network, calculates Converter-Chopping ratio using an Adaptive control of NN. The results of an Adaptive control of NN compared with the results of Converter-Chopping ratio which are calculated mathematical modeling and evaluate the proposed algorithm. The experimental data show that an adequacy of the algorithm was established through the compared data.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.130.2-130.2
• /
• 2011

지상의 관측소에서 특정 인공위성을 찾아내기 위해서는 위성의 정밀궤도 계산이 필요하다. 궤도상의 인공위성의 위치는 시간에 따라 계속 변하므로 이러한 위성의 위치를 실시간으로 추적하기 위해서는 컴퓨터를 이용한 계산이 필수적이다. 정밀한 계산 결과를 얻기 위하여 태양과 지상 관측소의 위치는 Astronomical Almanac과 지구 타원체 모델을 이용하여 계산 하였다. 인공위성의 궤도는 미공군 북미방공사령부(NORAD)에서 발표하는 TLE를 초기값으로 이용하여 J2 섭동효과를 포함한 위성의 위치 및 속도의 변화를 계산하여 SkyView로 나타내었다. 이렇게 나타낸 SkyView의 결과를 실제 위성의 궤적과 비교하여 위성의 궤도를 검증하였으며, 시간에 따른 위성의 광도 곡선 변화 계산 루틴을 작성하여 실제 위성을 찾아내기 위한 기초자료로 활용이 가능하도록 하였다. 모든 계산을 위한 프로그램을 Visual Studio.net 2010 환경에서 C++ 언어를 이용하여 작성하였으며, 결과를 나타내기 위하여 Nokia 사의 Cross Platform 라이브러리인 Qt를 이용하여 UI 제작 및 Visualization을 수행하였다. Qt 라이브러리는 C++ 언어를 기반으로 작성된 플랫폼 독립적인 GUI 라이브러리로써 MS Windows, Linux, MacOS 환경에서 사용이 가능하다. 이를 통해 운영체제에 관계없이 모든 컴퓨터 환경에서 동일한 유저 인터페이스를 이용하여 계산을 할 수 있다. 본 연구는 향후 우주물체탐색에 있어 독자적인 운영을 위한 프로그램으로 활용할 예정이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3161-3167
• /
• 2010

Hall sensors of BLDC(brushless DC) motor are used to detect a position information for a control mechanism, which implements an algorithm for velocity and position control. Actual azimuth and altitude were measured to evaluate a control precision. The measurement revealed comparatively good accuracy that the measured values were $2.02^{\circ}$ and $1.01^{\circ}$ respectively, and the maximum error falls within $1.86^{\circ}$. The developed monitoring system of photovoltaic generation plants is a LCU(Local Control Unit) based on an integrated monitoring system which supports 1:N method for multiple simultaneous connections, remote control and real-time system state monitoring.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.135-141
• /
• 2008

In this paper a novel tracking system is described, regarding the influence of shadow between array, aimed at improving the efficiency of PV tracking system. Comparing with a building site versus capacity power, domestic solar powers have a limited siting. Therefore, each array interferes with the shadow of other arrays. The loss by influence of those shadow can be compensated for by means of control algorithm of the tracking device. The paper suggests a method controlling an altitude for length which is received the shadow influence of PV array. By using an azimuth of current solar position and the length between arrays, the controller of tracking device is able to calculate the length between actual arrays and make a comparison of the shadow length at a specific time with the length between arrays. When the shadow length is longer than the length between arrays, the controller of tracking device can adjust a position by compensating error altitude of the length between arrays at an altitude of current solar position. In the paper, we develop the control algorithm able to minimize the loss caused by the influence of shadow on the PV tracking system, and compared this with conventional output system. The controller has been tested in the laboratory with proposed algorithm and shows excellent performance