• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.40-50
• /
• 2003

The operational orbit evolution of the KOMPSAT-l over 3 years was analyzed. During LEOP, four orbit maneuvers were performed to obtain the optimized orbit and eight safe-hold modes happened. The effects of unpredictable occurrence of the safe-hold mode and the highest solar activity on the orbit evolution during the mission life were analyzed. The comparison of orbital elements between long-term predicted orbit and determined orbit from observed data was also performed. The operational orbit started from the optimized one was evolved within the boundary of the designed mission orbit except altitude and it was verified the sun-synchronous orbit was successfully maintained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.752-759
• /
• 2012

This paper presents a mission orbit design method for spacecraft which use the sun-synchronous and ground repeat orbits. In this work, we have proposed a new design procedure, "Nonlinear simulation-based numerical optimization technique" using the commercial S/W's such as STK (Satellite Tool kit) and Matlab, which are widely adopted S/W's in the area of orbital mechanics and engineering analysis. Inclusion of all the perturbation effects on the spacecraft not only can more precisely satisfy the mission requirements for sun-synchronicity and repeated ground track, and also operational requirements such as minimum change in the S/C local time, maximization of the contact time with a specified ground station, etc. can be appropriately considered. Design examples for LEO sun-synchronous mission are presented to demonstrate the usefulness of the proposed method in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.141-148
• /
• 2015

This paper presents a sun-synchronous orbit design which effectuvely includes the requirements derived from spacecraft to ground station contact and spacecraft to target image accessibility. For this purpose, operation parameters of multiple spacecraft are defined as Contact Overlap, Contact Overlap Gap, Access Overlap, Access Overlap Gap. These parameters are used to form a Figure of Merit that reflects the operational requirements. The Figure of Merit is optimized to increase the efficiency of operating multiple spacecraft in constellation and is used to determine the operational orbit of each spacecraft that constitutes the constellation.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.28.3-28.3
• /
• 2010

위성이 궤도를 운용함에 있어서 원으로 운용되는 저궤도(LEO)에서는 대기저항(Drag)에 의한 섭동 영향이 가장 크게 미친다. 이 연구에서는 대기저항 섭동에 의해 감소되는 위성의 고도를 전기추력기를 이용하여 고도를 유지할 때 이를 해석적인 측면에 대해 살펴보고 지구 관측 위성에서 많이 쓰이는 태양 동기 궤도(SSO)에 적용하여 궤도를 유지하는 방법에 대해 알아보았다. 태양활동에 의한 대기의 밀도변화를 John kennewell의 모델을 통해 예측하여 대기저항에 의해 감소되는 고도량을 구하고 위성에서 추력(thrust)을 줄 때는 Gaussian Variation of Parameters식을 이용하여 해석적인 방법으로 궤도 장반경의 증가량을 구하였다. 위성에 추력을 줄때 이심률이 증가하게 되는 문제는 구속조건으로 이심률 값의 최대 허용치를 정하여 증가하는 것을 방지하도록 하였다. 또한 $J_2$ 섭동에 의해 가장 영향을 받는 승교점(Ascending Node)과 추력에 의해 변화할 수 있는 근지점(Perigee)을 살펴보고 궤도 유지를 위한 적절한 추력 방향을 구하였다. 각각의 궤도 요소의 변화를 살펴보고 일반적인 태양 동기 궤도 위성의 제원을 이용하여 궤도 유지에 적용하였다. 저궤도 위성의 궤도 유지에 대한 복잡한 수치적인 방법으로 궤도요소의 변화를 정확하게 구하지만 해석적인 방법으로도 위성의 궤도 유지를 위한 정보를 얻을 수 있었다. 이를 저궤도 위성의 궤도 운용과 변화 예측에 적용할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.890-896
• /
• 2019

Due to the eccentricity of the Earth's orbit around the Sun and the obliquity of the Earth rotation axis against ecliptic frame, the apparent solar time differs from the mean solar time. Since the solar array of a GEO satellite makes a turn in mean solar day, the Sun pointing error of solar array is introduced over the year due to the equation of time. In this paper, efficient methods of compensating the equation of time to keep the solar array pointing the Sun are presented and verified with realistic simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.283-288
• /
• 2019

In this paper, there is summarized the validation of ground test results through the telemetry acquired during on-orbit initial activation on solar-array drive assembly(SDA) of GK2A launched at Dec-5, 2018. Especially, the decision logic of SDA initial position and the compensation logic are validated and confirmed. The SDA initial position is needed when GK2A enter to geostationary orbit from transfer orbit and the compensation logic is for the accumulated position error due to the open-loop control. Up to now, it is normal operating. Also the periodic offset between the geostationary orbit and Sun position is found that it is not checked on design phase, and then the proper threshold value is applied.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.141-151
• /
• 2018

A trajectory analysis program was developed to predict KSLV-II (Korea Space Launch Vehicle-II) performance with the reducing weight. The program estimates the LEO (Low Earth Orbit) / SSO (Sun-Synchronous Orbit) injection performance, which is determined as payload weight for the orbits, with decreasing the structural ratio or increasing rocket engine power. It is expected that the KSLV-II can transport up to 4.5 tons, 3 tons of space payloads at LEO, SSO with a reduced structural ratio by 60% of the original. It also shows that the KSLV-II can transport up to 3.65 tons at SSO by applying advanced engines of 90 tonf, 10 tonf class with the reduced structure.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.2
• /
• pp.127-134
• /
• 2006

Variation of the Local Time of Ascending Node (LTAN) has been analysed according to initial inclinations when the altitude of Sun-synchronous satellite is continuously decreased due to the atmospheric drag. Orbit predictions of 3 years have been performed with the satellite of 500 km altitude when the initial LTAN were set to 06:00, 09:00, 12:00, 15:00, and 18:00. Different profiles of the inclination and LTAN have been obtained according to the satellite altitude decay and initial LTAN value. Using the profiles of the inclination and LTAN, initial orbital elements can be derived for minimizing the LTAN variations during the mission life time of the sun-synchronous satellite without any on-board thrusters for orbit maneuvers.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.193-200
• /
• 2011

The external disturbance torque acting on a low earth orbit spacecraft was analyzed. For the Earth pointing attitude, the maximum torque to the spacecraft is about $8.3{\times}10^{-4}$ Nms and the momentum accumulated for an orbit is about 1.4 Nms and for the Sun pointing attitude, the maximum torque to the spacecraft is about $1.6{\times}10^{-3}$ Nms and the momentum is accumulated about 3.0 Nms in the spacecraft body reference frame. The analysis results confirm that the size of magnetic torquer selected previously for the satellite is sufficient to manage the accumulated momentum by considering the dumping capacity for an orbit.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.25.1-25.1
• /
• 2011

다목적 실용위성 5호는 국내 최초로 합성 개구면 레이더(SAR)를 장착한 지구 관측위성으로서 2011년 중반에 러시아의 Dnepr 로켓에 의해 발사되어 평균 고도 550 km의 태양동기 여명궤도에서 운용될 예정이다. 위성은 28일을 주기로 지구를 421회 공전하는 반복 지상궤적을 가지며 인터페로메트리 레이더 영상의 획득을 위해 위성이 지구적도 상공을 통과할 때 기준경도로부터 ${\pm}2$ km 이내로 지상궤적이 유지될 수 있도록 궤도조정을 수행한다. 위성은 궤도에 투입된 후 2개월 이내에 정상적인 지상궤적을 획득하고 몽골에 설치된 레이더 반사판을 이용하여 4개월에 걸친 검보정을 수행한 후에 정상적인 운용에 들어가게 된다. 이 연구에서는 위성이 발사체와 분리된 이후 정상적인 지상궤적을 획득하는데 걸리는 시간을 분석하고 위성의 지상궤적을 기준 경도로부터 ${\pm}2$ km 이내로 유지시키기 위한 궤도조정에 필요한 조정주기와 연료소모량을 분석한다.