• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.7-15
• /
• 2003

The purpose of this simulation study is to determine the window transmittance by RADIANCE lighting simulation tool where the horizontal blind is installed. Parameters such as sky types, seasonal changes, altitude, azimuth, and horizontal blind angle at a 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ were considered. The simulation results present that measured directional transmittances have different values according to each directional property of the horizontal blind. In addition, methodology was described to apply window transmittance data to DayDim program which is a lighting calculation and analysis tool especially for the performance of daylight responsive dimming systems.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.949-952
• /
• 2003

인터넷으로 표현되는 디지털 세상은 빠른 속도로 변하는 삶 전체에 영향을 미치는데, 특히 산업체에서의 업무와 일하는 방식을 바꾼다. 인터넷과 웹 접속 기술은 현재의 업무 과정을 개선하고, 전통적인 제조 기업의 생산성과 관리 효율을 극대화한다 본 논문에서는 이러한 발전 설비의 안정성과 원거리 모니터링의 신뢰성과 PV시스템의 제어에 관한 것이다 그리고 PV시스템의 센서 모니터링 데이터와 간접적인 제어를 설계하였다. 전통적인 모니터링 시스템은 특수한 하드웨어나 소프트웨어에 의존한다 모니터링 시스템의 기본적인 목표는 사용자가 휴대용 단말기를 통해 모니터링과 제어를 할 수 있게 하는 것이다. Labview GUI를 이용하여 설계한 모니터링 시스템은 윈도우 2000을 운영체제로 한 IBM PC를 사용하였고, TCP/IP 프로토콜에 기본을 두었다. 이러한 모니터링 시스템의 이점은 사원의 지출(급여)를 줄이고 지구 어느 곳에서든 발전 시스템을 인공위성을 통하여 모티터링과 제어를 할 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.488-488
• /
• 2011

산화 아연(ZnO)나노와이어를 이용한 태양전지, 광소자 등 발전소자 개발이 진행되고 있고 차세대 트랜지스터, 다이오드, 센서에도 많이 이용될수 있다. 따라서 다양한 제품 응용에 필요한 나노 구조체 형상 제어를 위해 다각적인 노력이 제기되고 있다. 본 연구에서는 유리(EAGLE 2000)기판 위에 AZO 박막을 증착 한 후 포토리소그래피 공정을 이용하여 직경이 2 um 미만인 원형 패턴을 형성한 후 수열 합성법을 이용하여 지름 200 nm, 길이 3 um인 수직형 나노와이어를 성장하였다. 기존의 ZnO 나노와이어 합성 방법은 섭씨 500도 이상의 비교적 높은 온도조건을 요하기 때문에 포토리소그래피 공정을 이용하여 진행할 수 없었다. 그러나 비교적 낮은 온도인 100도 이하에서 수용액 상태에서 합성이 가능하게 됨에 따라 보편화 되어있는 포토리소그래피 공정과 손쉽고 저렴한 수열 합성법을 이용하여 필요한 부분만 미세하고 선택적으로 nano wire를 성장시킬 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.828-833
• /
• 2014

Grid connected transformerless solar power generation system is frequently used with the benefits of cost and efficiency. However, significant DC leakage current can flow from the DC line into the ground with dielectric breakdown in the transformerless solar power generation system. The leakage current occurred in the DC line causes accidents such as fire and electric shock on human. To resolve this problem, high sensitivity DC leakage current sensor is needed. But recently the studies on safety of DC line are not performed. In this paper, a high sensitivity DC leakage current sensor that can detect DC leakage current in solar power generation system, is proposed. Based on the studies, DC leakage current sensor is fabricated and characteristic tests are carried out. Finally, the accuracy of sensor performance is verified by leakage current experiments in solar power generation system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.935-938
• /
• 2010

Indium-tin-oxide (ITO) films show a low electrical resistance and high transmittance in the visible range of an optical spectrum. The transparent electrodes have to get resistivity and sheet resistance less than $1{\times}10^{-3}{\Omega}/cm$ and $10^3{\Omega}/sq$ respectively and transmittance over 80% at wavelength of 380nm~780nm. This study establishes DC magnetron sputtering process condition on ITO thin film by measuring electrical and optical properties of the thin film. As results, we obtained $300\;{\mu}{\Omega}cm$ resistivity of ITO films with good transmittance (above 90 %) under 90:10 wt% composition rate of $In_2O_3:SnO_2$. Also, we understood that the ITO thin film by DC magnetron sputtering depends on the deposition condition, especially substrate temperature, and the composition rate of $In_2O_3:SnO_2$ that is one of the most critical parameters was successfully optimized for high qualified transparent electrodes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.910-912
• /
• 2009

투명전극은 비저항이 $1{\times}10^{-3}{\Omega}/cm$이하, 면저항이 $10^3{\Omega}/sq$이하로 전기전도성이 우수하고 380에서 780nm의 가시광선 영역에서의 투과율이 80%이상이라는 두 가지 성질을 만족시키는 박막이다. 기존의 평판디스플레이의 경우, 금속 산화물 투명전극이 진공 증착 공정을 통해 도포된 유리기판상의 각 화소를 포토리소그래피 공정으로 제조된 박막트랜지스터(TFT : Thin Film Transistor)로 제어함으로써 화상을 구현한다. 본 연구에서는 스퍼터링 진공 증착 장치를 이용하여 투명 도전막(ITO: Indium Tin Oxide)을 제작하고 제작된 ITO 박막의 광 및 전기 그리고 물성적 특성을 조사하여 최상의 공정 조건을 확립하였다. a-Si:H 박막위에 형성되는 ITo 박막은 a-Si:H 박막의 특성상 온도 및 스퍼터링 전력에 대한 연구가 주요 문제이다. 본 실험에서는 $In_2O_3:SnO_2$의 조성비는 90:10 wt% 인 타겟의 특성이 우수하였고, $Ar:O_2$의 분압비는 100:1 및 42:8 의 조건이 적당하였으며, 온도는 $200^{\circ}C$ 가장 우수한 특성을 얻을 수 있었다. $200^{\circ}C$ 는 비정질 실리콘의 성능에 좋은 영향을 미치는 온도이며, 알려진 것과 같이 $23^{\circ}C$ 즉 실온의 경우에 비해 막의 균질성 및 특성이 우수 한 것을 알 수 있었다. 본 연구에서 제작한 박막은 광 투과도가 90% 이상, 비저항이 $300{\mu}{\Omega}cm$ 이하의 특성을 갖게되어 이미지센서, 태양전지, 액정 텔레비젼등 빛의 통과와 전도성등 두가지 특성에 동시에 만족 될만한 성능을 가질 수 있음을 확인하였다.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.24-34
• /
• 1997

In this study, two different types of complementary electrochromic devices using amorphous $WO_{3}$ films as a working electrode, $V_{2}O_{5}$ film and NiO film as counter electrodes respectively were investigated. For the devices using amorphous and crystalline $V_{2}O_{5}$ films of $100{\sim}150nm$ thickness with $ITO/WO_{3}/LiClO_{4}-PC/V_{2}O_{5}/ITO$ structure, an optical modulation of $50{\sim}60%$ were obtained at a potential range of $1{\sim}2V$. It has been shown that transmittance and reflectance of light could be electrically controlled by low applied voltage. For the devices with $ITO/WO_{3}/LiClO_{4}-PC/NiO/ITO$ structure in which NiO film was deposited by a RF reactive sputtering, the optical modulation in visible light region (${\lambda}=550nm$) and in near infrared light region (${\lambda}=850nm$) were 25% and 30%, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.183-192
• /
• 2012

Although underground water resource has relatively less pollution rate compared with surface water, its recovery faces many difficulties due to poor management. Our country monitors underground water to manage it effectively through auxiliary observation network for underground water. In this paper, we suggest water-well auto measure system based on Geosensor for business efficiency increase of water-well management and realtime monitering. In this system is consist of user GUI(Graphic User Interface) composed with water-well information and movement sub-observation network prototype system composed with GPS(Global Positioning System) and wireless sensor node such as water temperature, water level, electrical conductivity. In this system is using the light of the sun for self-power, variety water-well information collected wireless sensor node was a wireless transmitting/receiving a using CDMA(Code Division Multiple Access) module. Also, for promote with user ease, user GUI express that water-well collected in GIS(Geographic Information System) map. For performance evaluation of the proposed system, we perform experiment using sensing information through designed sub-observation network. And we was proved superiority of the proposed system through qualitative evaluation with other paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.871-874
• /
• 2010

Needs for Smart Grid development are increasing all over the world as a solution to its problem according to depletion of energy resources, climatic and environmental rapidly change and growing demand for electrical power. Especially decentralized power is attracting world's attention. In this mood a new era for a unit scale of decentralized power environment is on its way in building. However there is a problem to have to be solved in the uniformity of power quality because the amount of power generated from renewable energy resources such as wind power and solar light is very sensitive to climate fluctuation. And thus this paper tries to suggest an energy management method on basis of real time monitoring for meteorological data. In the current situation of lacking in USN-based killer application in Smart Grid field, this paper proposes the USN-based DER management system which collects the meteorological data and control power system througout utilizing wireless sensor network technique this business. This communication technique is regarded to be efficient in aspects of installation cost and tits maintenance cost. The proposed EMS model embodies the method for predicting the power generation by monitoring and analyzing the climatic data and controling the efficient power distribution between the renewable energy and the existing power. The ultimate goal of this paper is to provide the technological basis for achieving zero-energy house.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.559-569
• /
• 2008

The Geostationary Ocean Color Imager (GOCI) on board the Communication Ocean Meteorological Satellite (COMS), the first geostationary ocean color sensor, requires accurate atmospheric correction since its eight bands are also affected by atmospheric constituents such as gases, molecules and atmospheric aerosols. Unlike gases and molecules in the atmosphere, aerosols can interact with sunlight by complex scattering and absorption properties. For the purpose of qualified ocean remote sensing, understanding of aerosol-radiation interactions is needed. In this study, we show micro-physical and optical properties of aerosols using the Optical Property of Aerosol and Cloud (OPAC) aerosol models. Aerosol optical properties, then, were used to analysis the relationship between theoretical satellite measured radiation from radiative transfer calculations and aerosol optical thickness (AOT) under various environments (aerosol type and loadings). It is found that the choice of aerosol type makes little different in AOT retrieval for AOT<0.2. Otherwise AOT differences between true and retrieved increase as AOT increases. Furthermore, the differences between the AOT and angstrom exponent from standard algorithms and this study, and the comparison with ground based sunphotometer observations are investigated. Over the northeast Asian region, these comparisons suggest that spatially averaged mean AOT retrieved from this study is much better than from standard ocean color algorithm. Finally, these results will be useful for aerosol retrieval or atmospheric correction of COMS/GOCI data processing.