• Korean journal of food and cookery science
• /
• v.13 no.1
• /
• pp.40-46
• /
• 1997

This study was conducted in order to determine the effect of preparing conditions(refrigerating and freezing of dough, dough size, frying temperature, kneading degree and ingredient amount) on the dehydration, absorbed oil content and sensory characteristics of Yackwa. There were no significant differences on the dehydration, absorbed oil content and sensory characteristics between the control Yackwa and those prepared by refrigerating and freezing of dough. In the dough size (large, medium, small), dehydration and absorbed oil content was increased as the size became smaller. It was shown that overall acceptability was high in medium size Yackwa. There were no significant differences on the dehydration of Yackwa under various frying temperature and kneading degree. On the other hand, absorbed oil content of Yackwa was decreased as the frying temperature became higher and kneading degree increased. Dehydration of Yackwa was increased as the amount of sesame oil, honey and sozu increased. There were no significant differences on the absorbed oil content of Yackwa as the amount of sesame oil increased. The absorbed oil content was increased as the amount of honey increased, whereas the absorbed oil content decreased as the amount of sozu increased. Shininess, softness, brittleness and oily taste was increased as the absorbed oil content increased in sensory evaluation of Yackwa prepared by different frying temperature, kneading degree and ingredients amount. It was shown that above preparing conditions affected the absorbed oil content and sensory characteristics of Yackwa.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.358-364
• /
• 2010

Ginger was dried using maltodextrin or recycled dehydration liquid as dehydrating agents, and the quality of dried ginger was compared with that of freeze-dried and hot-air-dried samples in terms of color, moisture content, water activity, dehydration rate, rehydration rate, and sensory properties. Ginger prepared using molecular press dehydration (MPD) retained its original color. The dehydration rate increased when ginger was dried using a dehydrating agent. The rehydration rate was increased in ginger dried using such an agent. Both dehydration and rehydration rates were elevated with increasing concentrations of soluble solids in the dehydration liquid. The sensory qualities of ginger prepared using the MPD method were better than those of freeze-dried and hot air-dried samples. These results indicate that drying of ginger rhizomes using recycled dehydrating liquid is very efficient.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

본 연구는 목재중의 수분량이 변화하는 비정상태하에 있어서의 액체투과성을 평가하기 위한 새로운 방법으로써 원심법에 의한 액체투과성을 평가하기 위한 새로운 방법으로써 원심법에 의한 액체투과성의 평가법을 확립해 보고자 실시하였다. 이 방법은 원심력장에 있어서의 액체투과성과 원심처리부로부터 액체투과성을 평가하는 것이다. 실험결과, 삼나무(Cryptomeria japonica)와 미송 (Pseudotsuga menziesii)은 서로 다른 탈수경과를 나타내었다. 삼나무는 미송보다 더 많은 탈수량을 보였고 재내의 태수량의 변이가 심하였다. 한편 변재와 심재의 탈수거동에 있어서 삼나무는 기체투과성에 의해 평가된 값과 상반된 결과를 나타내었다. 즉, 2200∼3300rpm의 범위에서 편재는 심재보다 탈수량이 적었다.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.4
• /
• pp.358-365
• /
• 2006

To study simultaneous water and solute transport kinetics during soaking in concentrated solution, the influence of the concentration and molecular weight of the solute(polyethylene glycol(PEG) and NaCl) in the soaking solution and the temperature on the water loss and solute gain rates were observed by using a model vegetable tissue(potato). When potato slices$(4cm{\times}4cm{\times}0.1cm)$ soaked in 60% PEG solutions, the water loss rate of the early phase decreased with increasing of the molecular weight of PEG from 200 to 6,000, while the final water loss increased with increasing the molecular weight of PEG and it reached to 80%. The cell wall of potato tissue was permeable to NaCl and PEGs of which average molecular weight is smaller than 400 but it was not permeable to PEG 600 and larger molecules. PEG which has average molecular weight below 600 induced plasmolysis and those above 600 induced cytorrhysis. The water loss rate of potato sample soaked in smaller molecular weight PEG solution was faster than those soaked in higher molecular weight PEG solution before cytorrhysis happened. The water loss rate was reversed after cytorrhysis happened. The volume change of potato within the first 60 minutes was larger in low molecular PEG solution but the final ratio of decreasing volume was larger in high molecular PEG solutions. In PEG 200 solution, the potato tissue was slightly shrinked without shape change. However, in PEG 4,000 solution, volume of potato was reduced significantly and potato tissue was twisted.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.6
• /
• pp.582-587
• /
• 1999

감자절편을 고농도용액에 침지하여 탈수시킨 결과 침지용액을 구성하는 용질의 분자량에 따라 탈수형태가 다르게 나타났다. 저분자 용액인 NaCl, PEG 400 용액에 침지한 경우 조직의 뒤틀림현상(cytorrhysis) 은 나타나지 않고 부피의 감소와 수분의 탈수현상이 나타난 반면 고분자 용액인 PEG 4000, PEG 6000용액에 침지한 경우 cytorrhysis 현상을 동반한 부피의 감소와 탈수현상이 나타났다. 초기 탈수속도는 저분자 용액에 침지시 더 빨랐으나 최종 탈수량은 고분자 용액에 침지시 더 컸다 고장성 용액에 감자절편을 침지시켜 탈수되는 기작이 두가지 압력(삼투압 분자압착력)에 의해 진행된다고 가정하고 모델을 제안하여 감정한 결과 제안된 모델은 고분자 용액에 침지시의 탈수현항을 설명하는데 적합하였다. 모델에서 구해진 압력인자(ΔP)와 농도인자(a)는 온도(T)와 농도(C) 의 함수로 표현되며 계수의 탄력성 검정결과 농도에 대한 의존성이 더 큰 것으로 나타났다.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1009-1015
• /
• 2006

The elcetrodewatering filter press(EDFP) which had anode and cathod plates to be set between filter plates was built for reducing the waterworks sludge and improving performance of dewatering equipment. Several tests to compare the dewaterability with conventional mechanical filter press dewatering(MDEP) and EDFP was conducted through this equipment. As test results, filtration amount discharged from EDFP measured 43.2 kg which increased against MDFP, and cake weight measured 4 kg which was two times against MDFP. The water content of dewatered cake from EDFP was 55wt% and dewatering velocity was 2.3 $kg/m^2{\cdot}cycle$. This water content decrease 20% and dewatering velocity increased 30% with compare to the MDFP. That is to say, EDFP constructed from electrodewatering mechanism increase filtrate discharging amount, which make dewatering velocity increase and produce the low water content dewatered cake against MDFP. Energy consumption of EDFP is analysed to 400 kwh/DS ton. The results to analysis the economical aspect considering the power consumption and the handling cost decline as sludge volume reduction due to producing the low water content cake showed that expenses to handle sludge of 1 ton by dry solid base cut down on 20,000 won. If considering several test aspects, it was analysed that EDFP was excellent in the side of performance as well as economical suitability.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.356-359
• /
• 2005

하수를 처리하는 공정에서 해마다 슬러지의 발생량은 증가하고 있으며, 이를 효과적으로 처리하는 것이 매우 중요하다. 따라서, 본 연구는 경제적이면서도 측정이 간편한CST(Cap-illary Suction Time)을 통해 슬러지 의 탈수성 과 적 정 주입량을 산출하는 방법을 연구하였다. 이를 위하여 본 실험의 대상인 도시 하수슬러지에 대하여 함수율 및 pH변화, 무기 및 유기 응집제의 주입량 변화, 그리고 응집제 투입 후 침전된 응집제량을 조사하여 탈수성을 조사하였다. 슬러지의 함수율을 97%, 98%, 99%로 했을 때, CST는 99%일 때가 가장 적은 값으로 나타났다 응집제 주입 후 침전된 슬러지의 생성량은 응집제가 증가됨에 따라 증가하다가, 최적 주입량보다 더 많은 응집제를 주입할 경우에는 그 양이 감소했다. 이는 형성된 응집물의 구조적 특성의 변화를 나타내고 있음을 알 수 있다. 위와 같은 실험 결과를 통해 CST는 수분이내(< Smin)에 슬러지의 탈수성을 신속하게 측정할 수 있는 방법이며 비교적 정확하게 측정할 수 있음을 알 수 있다. 뿐만 아니라 응집제의 최적 주입량 및 응집물의 구조적 특성을 평가하는 데에도 유용하게 사용할 수 있다.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.763-769
• /
• 2010

We examined variations in ginger dehydration and recovery rate upon use of dextrose of different equivalence values. The dehydration rate varied with dextrose equivalent and the dehydration rate increased as the equivalence value increased. Both dehydration and recovery rates varied with dextrose molecular weight. Moisture content was lowest in samples prepared by freeze-drying, and neither dextrose equivalent nor molecular weight affected moisture level. Upon color analysis, ginger dried using dextrose varying in equivalence and molecular weight was similar in color to the original material, unlike ginger dried by other methods. Hot-air-dried ginger scored lowest in all sensory tests, compared with ginger prepared by molecular press dehydration using dextrose varying in equivalence and molecular weight. With respect to the appearance of ginger, freeze-dried samples were optimal, but molecular press dehydration yielded samples that scored best upon overall evaluation. When all quality evaluation items were taken together, molecular press dehydration resulted in a better quality product than the older hot-air or freeze-drying methods.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.398-406
• /
• 2010

The purpose of this study was to determine the optimal mixing ratios for three different concentrations of maltodextrin, dehydration time, and cutting thickness to prepare gingers using molecular press dehydration (MPD) through response surface methodology (RSM) based on the dehydration rate, rehydration rate, and a sensory evaluation. As maltodextrin concentration increased, dehydration rate, rehydration rate, external, flavor, texture, overall acceptability of the gingers tended to be high, and the color tended to be low. As the dehydration time and cutting thickness increased, dehydration rate, rehydration rate and the sensory evaluation of the gingers tended to be high. The maltodextrin concentrations were 70-82%, dehydration time was 5.2-9.2 hr, and cutting thickness levels were 1.0-1.2 mm. The optimal mixing ratios, maltodextrin concentration, dehydration time, and cutting thickness for manufacturing the best quality of gingers using molecular press dehydration were 76%, 7.2 hr, and 1.1 mm, respectively.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.36-43
• /
• 2006

There was some difficulty dewatering properties due to small porosity diameter of cake, when pigment sludge contained fine particle was formed by cake under the dewatering. It was difficult to dewater the sludge with fine particles with the conventional mechanical dewatering method. This study was to improve the dewatering rate as discharging the water from porosity of cake easily, supplying the low heat to the cake layer. Thermal dewatering equipment of piston type to keep up constant temperature on the cake was set up and relative experiment was conducted for sludge of 200 g with fine pigment particle. As test results. filtration of 176.8 g, cake weight of 19.4 g, cake thickness of 4.2 mm was measured, and it was analyzed that the water content of cake was 47 wt% and dewatering velocity, which moaned the residual d교 sloid amount per dewatering area, was $2.1DS\;m^{2}{\cdot}cycle$. This results showed that filtration increased, cake weight and thickness decreased and dewatering velocity increased against mechanical dewatering method. And water content of cake decreased about 30%, so the result which dewatering rate improved was drew generally. The reason is that the inner vapor pressure working at the cake porosity increased as applying the low heat to the cake layer, which lead to discharge the water from porosity easily. Therefore, this study was estimated by the useful technology for sludge reduction.