• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.91-98
• /
• 2001

As the second part of the author's study, off-design behavior of the design and performance parameters in the low-solidity cascade diffuser in a centrifugal compressor is investigated. The experimental flange-to-flange compressor map serves the validity of application of the present CFD work to the detailed investigation of the low-solidity cascade diffuser. Some meanline design and performance parameters as well as three-dimensional internal secondary flow fields are studied when the flow rate is changed from deep choke to stall.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.211-218
• /
• 2000

Off-design experimental performance was investigated for a small centrifugal compressor, whose impeller diameter is about 125mm, used in an industrial gas turbine. Test rig was designed and manufactured with a radial inflow turbine and a combustor to supply driving power to the compressor. Static pressure was measured on the casing of the impeller, vaneless diffuser, vaned diffuser and volute. Total pressure was obtained using specially fabricated rakes at the vaned diffuser throat and exit. Circumferential nonuniformity was found, near surge, in the Impeller, vaned diffuser and volute region. Spanwise nonuniform flow from the impeller affected the total pressure defects in the vaned diffuser region. Static pressure distortion in the circumferential direction in the volute was found near surge, where the minimum occurred near 140 degree position.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.24-24
• /
• 1999

소·중형 상업용 항공기나 초등 훈련기용으로 많이 이용되고 있는 터보프롭엔진의 정상상태 성능해석을 위한 프로그램을 개발하였다. 프로그램의 검증을 위하여 지상정지조건에서의 성능 및 비행마하수에 따른 출력 등을 상용 정상상태 해석 프로그램인 TURBOMARCH 해석결과와 비교하였다. 비교결과 각 구성품의 입 ·출구 온도 및 압력, 출력 등에서는 약 3%이하의 오차율을 보였으며, 마하수 변화에 따른 출력 비교에서도 최대오차율이 2.4%로 프로그램의 신뢰성을 확인하였다. 개발된 프로그램을 이용하여 비행마하수 0.2, 80% 동력터빈 회전수에서 가스발생기 회전수를 5% 간격으로 나누어 부분부하 성능해석을 수행하였으며, 동력터빈 회전수에 따른 성능해석도 수행하였다.

• Informatization Policy
• /
• v.20 no.4
• /
• pp.71-88
• /
• 2013

Probability of technology risk is expected to increase as the post catch-up innovation, characterized by high uncertainty and high risk, would dominate in the coming era of post catchup. Social controversy on online game as a post catch-up innovation is still ongoing, though the shutdown law was enacted by the government. Socio-technical vulnerability causing technology risk paradoxically arose from the world top-level ICT infrastructures and has been reinforced by developmentalism. While both the pros and cons of the regulation fail to recognize dilemma objectively, social cost is brought about and accumulated. With recognizing dilemma between technology innovation and risks, we can tackle technology risks and ensure responsible innovation in post catch-up era.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.64-70
• /
• 2005

The overall results of hot firing tests of fuel-rich gas generator with impinging injector at design and off-design points are described. The gas generator consists of an injector head with impinging injector, a water cooled combustor wall, a turbulence ring to enhance mixing, an instrument ring measuring temperature and pressure and a nozzle. The combustion tests were successfully performed without damage of gas generator. Test results show that the outlet temperature is not dependent on residence time of hot gas within 4～6msec but dependent on chamber pressure. The relation between outlet temperature and combustion efficiency resulting from measured pressure, mass flow rate and area of nozzle throat is shown. The overall O/F ratio is the critical parameter to determine the outlet temperature and the linear correlation between two parameters is established.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.6
• /
• pp.46-53
• /
• 2008

Flow structures in an axial compressor with a non-uniform tip clearance were predicted by solving a simple prediction method. For more reliable prediction at the off-design condition, off-design flow characteristics such as loss and flow blockage were incorporated in the model. The predicted results showed that flow field near the design condition is largely dependent on the local tip clearance effect. However overall flow field characteristics are totally reversed at off-design condition, especially at the high flow coefficient. The tip clearance effect decreases, while the local loss and flow blockage make a complicated effect on the compressor flow field. The resultant fluid induced Alford's force has a negative value near the design condition and it reverses its sign as the flow coefficient increases and shows a very steep increase as the flow coefficient increases.

• Journal of Power System Engineering
• /
• v.16 no.5
• /
• pp.55-62
• /
• 2012

Centrifugal compressors are widely used and each operating condition is different. However, it cannot be manufactured according to the every operating condition. In the this study, performance of compressor was evaluated with various rotational speeds of impeller and various stagger angles of diffuser in order to apply a typical model widely. A centrifugal compressor was designed and manufactured based on the design point. On this machines, an experiment was conducted and the performance was predicted at off-design point. The performance prediction was validated with the experimental result and the numerical result. Although the isentropic efficiency on the prediction was slightly lower than that on the experimental result due to the heat loss in the experiment, the pressure ratio was predicted well and also the predicted results were matched well with the numerical results. When the rotational speed of the impeller and the stagger angle of the diffuser were changed together, the compressor can be worked in the high efficiency region and avoided operating in the stall region.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2012

In this study, numerical method, stage stacking method based on the result of numerical method and scaled stage stacking method have been applied to predict the performance of a multi-stage axial compressor with inlet guide vane. The results obtained through three different methods for off-design conditions were compared with performance test data. And the effect the angle of variable inlet guide vane was also investigated. The three-dimensional numerical simulation has been performed by using flow analysis program, $FLUENT^{TM}$ 6.3 and the performance prediction based on the stage stacking method has been performed with compressor analysis code from NASA.

• Korean Journal of Forensic Psychology
• /
• v.11 no.1
• /
• pp.63-87
• /
• 2020

Judgment and decision-making studies have shown that people are easily influenced and biased by information irrelevant to the object of judgment. There is a great deal of research that indicates that bias exists in the legal judgment scene. One of them is a bias induced by defendants' character evidence. This study examined whether cognitive activities such as discussion, counterfactual thinking, and peer assessment could reduce the bias induced by the character evidece. In Experiment 1, 121 college students were asked to give the percentage they believed the defendant to be guilty. There was no cognitive activity for the control group. There were three different cognitive activities for the experimental group: discussion, counterfactual thinking and discussion, and counterfactual thinking and peer assessment. Results showed reduction in bias for all the experimental groups, and there was no difference between them. In Experiment 2, there were 125 participants from general population for the same procedure as in Experiment 1. Results showed reduction in bias only for the counterfactual thinking and discussion group. In general discussion, we speculated the implication of the results and the reason for the difference between the two experiments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.133-137
• /
• 2008

Results of combustion tests performed for a regenerative cooling combustor of a 30 tonf-class liquid rocket engine were described. The combustion chamber has chamber pressure of 60 bar, propellant mass flow rate of 89 kg/s, and nozzle expansion of 12. The combustion chamber is composed of mixing head, baffle injector, and regenerative cooling chamber. The hot firing tests were performed at design and off-design points. The test results show that the combustion characteristic velocity is in the range of 1738${\sim}$1751 m/sec and the specific impulse of the combustion chamber is in the range of 253${\sim}$270 sec. The peak of combustion characteristic velocity and specific impulse for this combustor is shown at mixture ratio of 2.35 and 2.5, respectively.