• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.119.2-119.2
• /
• 2016

가열탈기체 처리하면 표면의 물 분자를 빠르게 탈리시켜 단시간에 배기하는 동시에 진공용기 재료 내부의 수소 확산속도를 가속하므로 처리 후 수소 기체방출도 현저하게 낮출 수 있다. 가열탈기체 후의 진공계에서는 물 분자는 일부만 남고 진공용기 재료 내부에서 확산 되어 나온 수소가 잔류가스의 대부분이 된다. 이러한 가열탈기체 처리의 효과에 대해서는 익히 알려져 있으나 정량적으로 예측하기는 쉽지 않았다. 본 연구에서는 가열탈기체 조건이 수소 확산에 미치는 영향에 초점을 맞추어, 진공용기의 재료 및 두께에 따라 목표 진공도에 도달하기 위한 가열탈기체 처리 온도와 시간의 최적 조합을 수치 해석적으로 계산하고 비교하였다.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.31-37
• /
• 2003

A study on the characteristics of ammonia desorption from aqueous solutions has been performed by air stripping as the first stage of ammonia recycling for the preparation of ammonium sulfate from it. For air stripping experiments, a stripping column made with acrylic tube of 40 mm diameter was employed and compressed air was injected into solutions through air sparger equipped at the bottom of stripping column. As a result of experiments, the stripping efficiency was increased with the aqueous pH and it was found that the appropriate pH for air stripping of ammonia was between pH 10 and 12. As far as the effect of air flow rate on ammonia stripping was concerned, ammonia stripping was not proportional to the air flow rate although it was affected by the air flow rate to some extent. Moreover, when more than 20 cm of water height was maintained, total ammonia desorbed from solution was not varied with the water height. Stripping temperature was also found to play an important role in ammonia desorption and about 90fo of initial ammonia was desorbed in 14 hours at pH 12.8 and at $60^{\circ}C$ Finally, it was believed that stripping temperature as well as the aqueous pH was one of the most important factors in air stripping of ammonia.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.103-103
• /
• 2011

고진공의 바이러스격인 탈기체의 속성과 KRISS에서 보유중인 탈기체의 측정장치들의 각 특징들을 소개한다. 또한 산업체에서 시험 의뢰한 재료 종류 분석을 통해 산업체의 동향을 간접적으로 제시한다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.73-79
• /
• 2006

Aeration is the most important and indispensable operation unit for the treatment of swine manure using aerobic liquid-composting process. The composting of swine manure depends on biological treatment process, but the highly concentrated ammonia nitrogen is required a pretreatment to expect the appropriate efficiency of the biological treatment process. In this study, pilot experiments have been carried out to estimate of the fit condition about ammonia stripping process as a pretreatment to aerobic liquid- composting. pH adjustment with $Ca(OH)_2$ was economically superior to use of NaOH and optimum pH of ammonia stripping was 12.3, ammonia nitorgen was rapidly removed as pH were increased at $$35^{\circ}C$$. When air stripping is performed before aerobic liquid-stripping, a high initial pH is required for complete ammonia removal and is additional effects such as organic substances, phosphorus, turbidity, and color removal. Stripping process was very efficient in the pretreatment of highly concentrated ammonia nitrogen for composting of swine manure. Emission rate of gaseous ammonia was $0.5355mole\;s^{-1}$ at initial time and $0.0253mole\;s^{-1}$ at finitial time. The fit condition of ammonia stripping in this study were at the temperature of $$35^{\circ}C$$, and the pH of 12.3 during 48 hours.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.207-213
• /
• 2016

In this study, a thermal flow analysis was performed using the commercial code, ANSYS-FLUENT to reduce room temperature in a turbine building of power plant. The selected control volume of the operating floor and deaerator floor for the turbine building was respectively modelled. The skylight windows at the deaerator floor were employed for ventilation windows. Through the study, in the first we found that all window close of the deaerator floor is one alternative for reducing the temperature of the operating floor. The next thing we knew that for windows open at the front of the deaerator floor, the temperature of deaerator zone and crane zone can be respectively reduced to $1.5^{\circ}C$ and $1.6^{\circ}C$. In addition, for windows close at the rear of the deaerator floor, the temperature of deaerator zone and crane zone can be respectively reduced to 1.4 and $0.5^{\circ}C$. Therefore, it was concluded that a better choice is to open the front windows at deaerator floor to reduce the temperature of the entire deaerator floor having high temperature.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.189-190
• /
• 2008

원자력발전소의 탈기기 계통(Gas Stripper System)은 약 $25^{\circ}C$의 순수를 1.2기압, $105^{\circ}C$ 상태를 거쳐서 가스가 없는 상태(탈기)로 만들어 주는 계통이다. 탈기 상태를 유지하면서 지속적으로 순수를 만들기 위해서 본 계통에는 수위와 압력 제어루프가 있다. 탈기 상태에서는 탈기기 탱크내의 유체 상태가 이상(Two Phase)이기 차가운 급수를 사용한 수위와 압력 제어가 어렵다. 본 논문에서는 모델 기반으로 제어 최적화를 하기 위하여 제어 구성 요소들에 대한 제어 모델링 및 검증 과정을 기술한다. 제어모델링은 일반적으로 Parameter Identification 기법을 적용하지만, 유체역학 수식 모델, 운전 데이터, 탱크와 배관의 설계 자료 등을 이용한 경험적 방법을 적용하였으며 운전 데이터를 사용하여 검증하였다.

• 월간 기계설비
• /
• s.107
• /
• pp.48-52
• /
• 1999

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1893-1904
• /
• 2000

Nitrogen compounds are one of the major pollutants which cause eutrophication problems of the river or lake and red tides problems of the ocean. Currently available technologies for the removal of nitrogen compounds are mostly biological treatment. However, biological treatment is only effective for the wastewater which contains low concentration of nitrogen compounds. Leachate from solid waste landfill or industrial wastewater which contains high concentration of nitrogen can not be effectively treated by most of the currently available biological treatment technologies. With this connection. the objective of this study is to examine the applicability of ammonia stripping technology for the removal of high concentration of ammonia nitrogen compounds of the leachate from solid waste landfill. It can be concluded that ammonia stripping technology which was placed before the biological treatment process was very effective for the removal of high concentration of ammonium compounds. The chemical cost for the ammonia stripping was 16 percent higher than MLE process, so other methods like sludge recycling are needed for the reduction of operation cost. Further details are discussed in this paper.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.224-227
• /
• 2005

먹는물에서 염소소독 부산물로서 휘발성유기화합물인 디클로로아세트니트닐(DCAN), 트리클로로아세트니트릴(TCAN), 디브로모아세트니트릴(DBAN), 브로모클로로아세트니트릴(BCAN)의 4종류의 물질을 대상으로 탈기법(air stripping) 및 탈기법(air stripping)과 자외선에너지($8\;W{\times}6$)를 이용하여 분해시험을 행하였다. 물질들의 확인은 가스크로마토 그래프, 이온크로마토그래프 그리고 자외선분광광도계를 사용하였다. TCAN은 탈기법 이용한 방법에서 제거가 되었으며, DBAN과 BCAN에서는 자외선에너지에 의해 분해가 되었다.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

This study aims to propose a performance metric for the application of a horizontal air-exhausting system to be used for the reduction of vapor and/or moisture that exists in the waterproof layer, by evaluating the physical properties. For this reason, tests in accordance with current standards were carried out, and the results were examined. Finally, a proposal was established for a general performance metric that could be applied as fundamental data based on the user's judgment. This has some limitations, in that the object is existing merchandise, however it should be useful for application in the construction field. In the future, analysis of a wider area, including workability, should be added in the phase of field application.