• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.255-261
• /
• 2007

Soil aggregates, resulting from physico-chemical and biological interactions, are important to understand carbon dynamics and material transport in soils. The objective of this study is to investigate stable macro-aggregate (> 0.25mm diameter) in wet sieving (SM) and their relation to soil properties in 15 sites. The clay contents of soils were ranged from 1% to 33%, and their land uses included bare and cultivated lands of annual upland crops, orchard, and grass. Undisturbed 3 inch cores with five replicates were sampled at topsoil (i.e., 0- to 10-cm depth), for analyzing SM and physico-chemical properties, after in situ measurement of air permeability. SM of sandy soils, with clay content less than 2%, was observed as 0%. Except the sandy soils, SM of soils mainly depended on land uses, showing 27%~35% in soils with annual plants such as vegetable and corn, 51% in orchard, and 75% in grass. This sequence of SM is probably due to the different strength of soil disturbance like tillage with different land uses. SM had significant correlation with cation exchange capacity, organic matter content, sand, clay, silt, bulk density, and exchangeable potassium (K) and magnesium (Mg), whereas fluctuating properties with fertilization such as pH, EC, and water soluble phosphorus weren't significantly correlated to the SM. Particularly, exchangeable calcium (Ca) had significant relation with SM, only except soils with oversaturating Ca. This study, therefore, suggested that SM could perceive different land uses and the change of soil properties in soils, necessarily considering soil textures and Ca over-saturation.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.545-550
• /
• 1998

Succinic acid, valuable $C_4$-dicarboxylic acid as a renewable alternative feedstock, is currently produced commercially by the petrochemical process, but extensive efforts have been devoted to establish the biological process for mass production of succinic acid. In this study, the bioconversion of fumaric acid to succinic acid was investigated. We isolated an Enterococcus sp. RKY1 KCTC 8890P, facultative bacterium, capable of the bioconversion of fumaric acid to soccinic acid very rapidly and efficiently. At batch fermentation, the amount of succinic acid production increased with increase in initial fumaric acid from 40 to 100 g/L. With fumaric acid of 70 g/L, the average specific and volumetric production rate, molar yield were reached up to 0.64 g/g.h, 4.87 g/g.h, and 96.5%, respectively. Maximum concentration of succinic acid of 88.9 g/L was achieved with molar yield of 89% with fumaric acid of 100 g/L in less than 20 hours.

• Journal of Life Science
• /
• v.25 no.4
• /
• pp.463-472
• /
• 2015

Adrenomedullin (AM) is a peptide expressed in all body tissues, and its related receptors are increased in liver fibrosis. In this study, we evaluated the effect of AM deficiency on liver fibrogenesis induced by $CCl_4$ using AM heterozygous (HT) mice. The animals received a single injection of $CCl_4$ or olive oil for the acute experiment, and received $CCl_4$ or olive oil three times a week for 6 weeks for the chronic experiment. Fibrosis was accessed using histopathological analysis and the western blot. The AM HT mice showed mild pericentrilobular degeneration when compared to the AM wild type (WT) mice. In the acute experiment, there was no significant difference between the AM WT and AM HT mice. However, in the chronic experiment, the $CCl_4$-treated AM HT mice showed more severe liver fibrosis than that of the CCl₄-treated AM WT mice. The AST and ALT levels of the AM HT $CCl_4$ group were higher than those of the AM WT CCl₄ group. Additionally, the collagen deposition, $\alpha$- SMA protein and TGF-$\beta$ protein were increased in the AM HT $CCl_4$ group when compared to the AM WT $CCl_4$ group. The AM HT mice also exhibited severe lipid peroxidation through the GSH decrement. Taken together, our data suggest that AM deficiency increases the susceptibility to liver fibrosis induced by $CCl_4$, indicating a novel therapeutic target for patients with liver fibrosis.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.466-473
• /
• 2020

Fabric current collector can be a promising electrode material for Capacitive Deionization (CDI) system that can achieve energy-efficient desalination of water. The one of the most attractive feature of the fabric current collector is its high tensile strength, which can be an alternative to the low mechanical strength of the graphite foil electrode. Another advantage is that the textile properties can easily make shapes by simple cutting, and the porosity and inter-fiber space which can assist facile flow of the aqueous medium. The fibers used in this study were made of woven structures using a spinning yarn using conductive LM fiber and carbon fiber, with tensile strength of 319 MPa, about 60 times stronger than graphite foil. The results were analyzed by measuring the salt removal efficiency by changing the viscosity of electrode slurry, adsorption voltage, flow rate of the aqueous medium, and concentration of the aqueous medium. Under the conditions of NaCl 200 mg/L, 20ml/min and adsorption voltage 1.5 V, salt removal efficiency of 43.9% in unit cells and 59.8% in modules stacked with 100 cells were shown, respectively. In unit cells, salt removal efficiency increases as the adsorption voltage increase to 1.3, 1.4 and 1.5 V. However, increasing to 1.6 and 1.7 V reduced salt removal efficiency. However, the 100-cell-stacked module showed a moderate increase in salt removal efficiency even at voltages above 1.5 V. The salt removal rate decreased when the flow rate of the feed was increased, and the salt removal rate decreased when the concentration of the feed was increased. This work shows that fabric current collector can be an alternative of a graphite foil.

• Composites Research
• /
• v.29 no.6
• /
• pp.336-341
• /
• 2016

This paper conducted the study on the electromagnetic and mechanical applicability of CNT-coated glass fiber for wind blades. Large-size wind blade has the serious pending problems to meet the target, such as interfering radar signals, increasing weights, and increasing repair costs. In this paper, we are suggesting the CNT-coated glass fiber in order to overcome these problems. First, the CNTs were strongly coated on the surfaces of glass fiber by suggested coating process, and the CNT-coated glass fiber/epoxy composites were fabricated by Va-RTM process. We designed and fabricated a radar absorbing structure using the CNT-coated glass fiber, which showed over 90% radar absorbing performance between 8.3 and 12.1 GHz frequency. In addition, we confirmed the improvement of mechanical properties on the strength and modulus of tensile, compressive, and in-plane shear.

• Journal of the Korean Chemical Society
• /
• v.37 no.10
• /
• pp.874-880
• /
• 1993

Spectrophotometric enzymatic analysis and amperometric enzymatic analysis for the determinations of glucose and ethanol were studied utilizing glucose oxidase (GO) and alcohol oxidase (AO), respectively, which commonly consume $O_2$ and produce $H_2O_2$. For the determination of glucose, $H_2O_2$ were coupled to $K_4Fe(CN)_6$ via peroxidase producing $K_3Fe(CN)_6$ whose absorbance was measured at 418 nm or whose diffusion current was measured on the glassy carbon electrode at an applied potential of -55 mV vs. Ag/AgCl (sat. KCl) reference electrode. Amperometric analysis was 1000 times more sensitive as well as 10 times better in the linear concentration range than spectrophotometric analysis. For the determination of ethanol, AO only was used for the enzymatic analysis, since $K_3Fe(CN)_6$ was completely disappeared as soon as AO was added. Either rate of $H_2O_2$ produced was amperometrically measured at +0.900 V or rate of $O_2$ consumed was measured at -0.500 V vs. Ag/AgCl(sat. KCl) reference electrode.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.170-184
• /
• 2022

The Riparian Buffer Zone(RBZ) is a sustainable social-ecological system created in the middle zone between water and land. For the RBZ, close communication with the local community is important, and it is necessary to promote it as a communicative environmental planning process. In this study, for the RBZ project, three strategies are presented as a communicative act to understand and implement planning. First, government-led projects were avoided and improved to a process in which citizens and stakeholders participated together, centered on local partnership. Second, it was intended to introduce design criterias in terms of enhancing the function of ecosystem services that citizens can sympathize with, and to increase acceptance and awareness through the planning of preferred spaces and facilities. Third, after a balanced plan for habitats, water cycle-based ecological environment, ecological experience and open space, citizens felt the restoration effect and value as an ecological resources, and a system was prepared to participate in the operation and management. This study will work as a process model based on citizens's participation. In addition, it will be possible to provide lessons for the change of the policy paradigm for the RBZ and the implementation of similar projects in the future.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.29-45
• /
• 2007

Biogeochemical characteristics involving redox processes in groundwater from a riverine alluvial aquifer was investigated using multi-level monitoring wells (up to 30m in depth). Anaerobic conditions were predominant and high Fe ($14{\sim}37mg/L$) and Mn ($1{\sim}4mg/L$) concentrations were observed at 10 to 20 m in depth. Below 20 m depth, dissolved sulfide was detected. Presumably, these high Fe and Mn concentrations were derived from the reduction of Fe- and Mn-oxides because dissolved oxygen and nitrate were nearly absent and Fe and Mn contents were considerable in the sediments. The depth range of high Mn concentration is wider than that of high Fe concentration. Dissolved organics may be derived from the upper layers. Sulfate reduction is more active than Fe and Mn reduction below 20 m in depth. Disparity of calculated redox potential from the various redox couples indicates that redox states are in disequilibrium condition in groundwater. Carbonate minerals such as siderite and rhodochrosite may control the dissolved concentrations of Fe(II) and Mn(II), and iron sulfide minerals control for Fe(II) where sulfide is detected because these minerals are near saturation from the calculation of solubility equilibria.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.363-368
• /
• 1982

Ultraviolet spectrophotometric investigations were carried out on the systems of pyridine with iodine, iodine monobromide and iodine monochloride in carbon tetrachloride. The results reveal the formation of the one to one molecular complexes of the type, $C_5H_5N{\cdot}I_2$, $ C_5H_5$N{\cdot}IBr and $ C_5H_5N{\cdot}ICl$. Considering ${\lambda}_max$ according to the formation of charge transfer complexes has the blue shift with the increasing temperatures$25, 40, 60^{\circ}C$ the equilibrium constants K and molar absorptivities $\varepsilon$ of complexes were obtained. From these values, the thermodynamic parameters ${\Delta}H$, ${\Delta}G$ and ${\Delta}S$ for the formation of the above charge transfer complexes were obtained. These results indicate that the relative stabilities of iodine, iodine monobromide and iodine monochloride complexes with pyridine increase in the order, $ C_5H_5N{\cdot}I_2$ < $ C_5H_5N{\cdot}IBr$ <$ C_5H_5N{\cdot}ICl$. This may be a measure of relative acidity of halogen and interhalogen toward pyridine and can be explained by the polarizabilities of electron acceptors and the difference of electronegativities of halogen atoms.