• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.3
• /
• pp.86-91
• /
• 2024

In this study, the characteristics of mortar using carbondioxide conversion capture materials (CCMs), fabricated by reacting CO₂ with desulfurization gypsum (DG) by-produced from a oil refinery, as a cement mixture. Based on the chemical component and particle size analysis results, it estimated that desulfurized gypsum reacted with carbon dioxide to produce carbonate crystals such as CaCO₃. Using CCMs as a cement mixture, physical property and durability analysis were conducted by measuring such as workability, compressive strength, compressive strength ratio after freezing-thawing and accelerated carbonation depth. The experimental results showed that as the content of the admixture increased, workability and compressive strength characteristics decreased. Compressive strength after freezing-thawing and accelerated carbonation depth also showed similar characteristics to the physical property measurement results. In addition, compared to desulfurized gypsum, using CCMs showed better physical properties and durability. This was assumed to be due to differences in the crystal phases of the mixed materials such as free-CaO and CaCO₃.

• Composites Research
• /
• v.32 no.5
• /
• pp.265-269
• /
• 2019

The direct spinning of carbon nanotube (CNT) fibers is a promising method in the high performance composite materials. However, most of the reported CNT arrays do not have spinning properties because of their limited synthesis conditions. In this study, we investigate the properties of spinnable CNT arrays, which is closely related to the morphology of CNT array. The array morphology controlled by controlling the conditions of catalyst, carbon source, etc. By additional carbon source of ethylene and changing the composition of the catalyst, the waviness of the CNT array can be remarkably reduced, which leads to improve of the spinning properties. The synthesized CNT arrays were well aligned along c-axis and the synthesis conditions of the spinning array could be derived.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.202-205
• /
• 2006

Some advanced nations have already developed and utilized high performance carbocyclic compounds as liquid fuel components. The common point of these compounds includes polycycles. We synthesized some promising compounds which include multiplex ring form. According to three kinds of cyclopropanation method, we could synthesize five target materials and measure their physical properties.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.67-69
• /
• 2003

콘크리트는 경제성과 압축강도, 내구성 및 강성 등의 우수한 물성을 가지고 있으나 인장, 휨 및 충격강도가 낮고 에너지 흡수능력이 작아 취성적이며 균열에 대한 저항성이 작은 단점을 가지고 있다. 이러한 단점을 개선하기 위해서 각종 섬유를 콘크리트에 분산시켜 만든 섬유보강시멘트(FRC : Fiber Reinforced Cement)의 개발 및 이용이 활발히 진행되고 있다. PVA 섬유는 우수한 선형성, 입체구조의 간략함과 규칙성, 고결정성 그리고 우수한 접착성을 가지며, 유기 고분자로는 유일하게 PH 13.5이상의 격렬한 알칼리 조건에서도 거의 손상되지 않는 우수한 내알칼리성을 가지고 있다. (중략)

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.364-371
• /
• 2012

Polystyrene/single-walled carbon nanotube (PS/SWCNT) nanocomposites were prepared by latex technology and the effect of surfactant (SDS) on nanotube dispersion, rheological and electrical properties was investigated. The nanocomposites were prepared through freeze-drying after mixing PS particles and aqueous SWCNT/SDS suspension. As the SDS content increased, the storage modulus and complex viscosity of the nanocomposites were increased due to enhanced dispersion of nanotubes, but if the content excessively increased, the modulus and viscosity began to decrease due to low molecular weight of SDS. The electrical conductivity sharply increased with the addition of SDS, and then did not show significant changes. This result is speculated to be the competition between the increased dispersion of nanotubes and the deterioration of electrical conductivity by SDS adsorption. An optimal ratio of SDS to SWCNT for improving electrical conductivity and end-use properties was 2. With this ratio, the electrical percolation threshold of SWCNT was less than 1 wt%.

• Journal of Adhesion and Interface
• /
• v.19 no.2
• /
• pp.68-73
• /
• 2018

In this study, conductive EVA foams including multi-wall carbon nanotubes (MWCNT), glass beads were prepared. The electrical conductivity and physical properties of the foams were confirmed with varying amount of MWCNT, mixing time, and amount of glass beads. The electrical conductivity increased with the amount of MWCNT. Dispersity of MWCNT in EVA foams were improved with glass beads. It can be suggested that conductive EVA foams can be successfully prepared with improved dispersity of MWCNT in ethylene-vinyl acetate by using glass beads.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.500-504
• /
• 2010

The PU-g-MWNTs/PU film was synthesized by simple blending method to fabricate composites which have excellent mechanical and electrical properties. PU-g-MWNTs based composite revealed much enhanced dispersity than pristine MWNTs composite because of interfacial interaction related with interfacial compatibility between polymer matrix and PU on the MWNTs surface. The electro-conductivity of composite was measured as a function of PU-g-MWNTs concentration. The results were correlated with percolation threshold theory. As a result, the critical concentration and exponent of electro-conductivity behavior was equal to 0.78 wt% and 0.945.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.1-19
• /
• 1993

기계적 mechanism에 의해 동력의 전달 또는 방향을 전환할때 상대적으로 움직이는 두 면에서 필연적으로 발생하는 마찰, 마모를 감소시켜 원활한 작동을 유지시켜 주는 물질을 윤활유라 한다. 이러한 윤활유의 기능은 두 마찰면 사이에 유체막을 형성하여 마찰 및 마모를 감소시키는 마찰, 마모 작용과 같은 1차 기능과 두 마찰면 사이에서 발생하는 열을 냉각시키는 냉각작용, 금속표면의 청정성을 유지시키는 방청작용, 두 마찰면을 밀봉시켜주는 밀봉작용과 같은 2차 기능으로 대별할 수 있다. 윤활유의 구성은 크게 윤활기유와 기유의 물성을 보완 또는 기유에 없는 물성을 나타내는 첨가제들로 구성되어 있는데 기유로는 주로 Paraffine계, Naphthenic계, Aromatic계로 탄소수 20~50의 탄화수소 혼합물로 이루어진 광유계 깅유와 물성과 용도에 따라 인위적으로 합성된 여러가지 합성기유가 사용된다.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.1-8
• /
• 1992

본 고에서는 균질화법의 정식화를 이용하여 복합재료의 거시적 균질화된 재료상수를 구하고, 이 재료상수를 이용하여 거시구조물의 변형과 응력을 구하고, 이로부터 다시 미시구조의 응력분포와 변형도를 구하는 방법을 기술하였다. 주기성을 가정한 균질화법은 복합재료 구조물의 물성평가와 거동예측에 대한 매우 적절한 수치해석 방법이다. 균질화법은 이러한 선형변형의 문제뿐만 아니라, 내압을 존재하는 빈공간 소재의 물성, 기지재료와 강화재료 계면의 미끄러짐 등으로 인한 미세 파손현상 등의 예측이 가능하다. 그외에도 탄소성 대변형 거동 이론과 균질화법을 함께 적용하여, squeeze casting에서 발생하기 쉬운 계면분리나 파단 등의 미소결함과 같은 2차 성형성의 예측도 가능하다.