• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.136-136
• /
• 1999

박막의 탄성특성을 평가하는 방법으로 nano-indentation, Brillouin light scattering measurement, ultrasonic surface wave measurement, bulge test, vibration membrane method 등 여러 가지가 제시되어 왔다. 최근에는 탄성특성을 평가할 수 있는 간단한 방법으로 기판 식각 기법을 이용한 freehang, bridge 방법이 제시되었다. 이중에서 bridge 방법은 간단한 식각 기법을 이용하여 얇은 박막에서도 탄성 특성을 평가할 수 있는 방법으로 제시되었다. 그러나 식각 과정에서 발생하는 patch 부분의 under-cut으로 인해 정확한 bridge의 길이를 측정할 수 없게 되어 오차가 발생하고 있다. 본 연구에서는 bridge 방법에서 발생하는 오차를 줄이기 위한 방법으로, patch 부분에 etch-stop을 제작해 줌으로서 식각 과정에서 발생하는 under-cut을 효과적으로 제거시켰다. Etch-stop은 2장의 mask를 align key를 이용하여 제작하였다. 먼저 산화막이 형성되어 있는 Si 기판위에 mask 1을 이용하여 patch 부분을 lithography 작업하고, 습식 식각 공정을 한 뒤 DLC 필름을 증착시킨다. 다음으로 mask 2를 이용하여 bridge pattern을 제작하고, DLC 필름을 증착시킨 후 lift-off 기술과 산화막 등방식각 공정을 통해 bridge를 제작하였다. 이렇게 제작된 bridge를 통해 필름이 기판에 부착되기 위해 필요한 변형률을 측정하고, 독립적으로 측정된 필름의 잔류응력과 함께 박막의 응력-변형률 관계식에 적용시켜 biaxial elastic modulus, E/(1-v)를 구할 수 있었다. Sidl 첨가된 DLC 필름은 rf-PACVD 장비를 이용하여 증착하였다. 이때 전극과 플라즈마 사이의 바이어스 음전압은 -400V로 합성압력은 10mTorr로 고정하였다. 사용한 반응가스는 벤젠(C6H6)과 희석된 실렌(SiH4:2H=10:90)이며, 희석된 실렌의 첨가량을 조절하여 필름 내에 함유된 Si의 양을 조절하였다. 각각의 조건에서 증착시간을 조절하여 필름의 두께를 조절하였다. 필름의 잔류응력은 압축잔류 응력에 의해 발생한 필름/기판 복합체의 곡률을 laser 반사법을 이용하여 측정하고, 이 결과를 Brenner 등에 의해 유도된 식을 대입하여 계산하였다.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.441-450
• /
• 2006

The on-land seismic survey in Korea was begun in mid-1960s. Kim et al.(1967) of Korea Geological Survey reported on the result of gravity and seismic reflection surveys conducted in the Pohang area for the period of 1963-64 to assess its possibility of oil entrapment. Hyun and Kim (1966) carried out a refraction survey on the tunnel wall. Since then, the KGS geophysicists had conducted seismic surveys on Kyungsang sedimentary basin as a main project for several years. In 1970s, on-land seismic surveys had been conducted for various purposes such as site investigation for the nuclear power plants and industrial complex, exploration for ground water, mineral resources and underground tunnel. The first reflection survey with CMP acquisition was attempted in 1978 by using a digital recording system. But most of on-land seismic surveys had employed the refraction method until 1980s. In 1990s, high resolution reflection and various borehole seismic surveys such as tomography, uphole, downhole, cross-hole methods have been attempted by universities and engineering companies. The applications of on-land seismic surveys have been enlarged for both academic and industrial purposes such as investigation of geologic structure of the fault and tidal flat area, construction of highway, railroad and dam, geothermal energy and mineral resource exploration, environmental assessment for waste disposal sites and archaeological investigations. In 2002, the first crustal seismic survey was carried out on the profile of 294km length across the whole peninsular. It is expected that the advanced technology and experience acquired through offshore seismic surveys, which have been conducted in continental shelf of Korea and foreign oil fields, will stimulate the more active on-land seismic explorations.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.739-749
• /
• 2007

The seismic velocity at the formation varies widely with physical properties in the layers. These features on seismic shot gathers are not capable of reproducing normally by numerical modeling of homogeneous medium, so that we need that of random inhomogeneous medium instead. In this study, we conducted Gaussian autocorrelation function (ACF), exponential autocorrelation function and von Karman autocorrelation function for getting inhomogeneous velocity model and applied a simple geological model. According to the results, von Karman autocorrelation function showed short wavelength to the inhomogeneous velocity medium. For numerical modeling for a gas hydrate, we determined a geological model based on field data set gathered in the East sea. The numerical modeling results showed that the von Karman autocorrelation function could properly describe scattering phenomena in the gas hydrate velocity model which contains an inhomogeneous layer. Besides, bottom-simulating-reflectors and scattered waves which appear at seismic shot gather of the field data showed properly in the inhomogeneous numerical modeling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1897-1905
• /
• 2004

In many part of machines or structures that made of bimaterial bonded with two dissimilar materials, most failures occur at their interface. Therefore, the accurate analysis of fracture characteristics and the evaluation of mechanical strength for interfacial crack are essential when we design those structures. In this research, stress and displacement components in the vicinity of stationary interfacial crack tip in the two dissimilar isotropic bimaterials are established. Hereafter, the stress components established in this research can be applied to the photoelastic hybrid method which can be used to analyze the fracture behavior of the two dissimilar isotropic bimaterials.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.4
• /
• pp.469-481
• /
• 2008

The inelastic design of the three-span continuous composite plate girder with consideration of moment redistribution over the interior pier is performed using the LRFD method. The design of the girder section, based on the inelastic method, is compared with that by the conventional elastic design. The length of the center span for the three-span continuous bridge ranges from 40m to 70m and the relative ratio of the span length is assumed to be 4:5:4. Although the AASHTO- LRFD specifications are applied in the design of the composite girder, the recently proposed new design live load is used. After determining the maximum positive and negative sections by the elastic design for various limit states, the amount of moment redistributed to the maximum positive moment section is calculated. With the increased design moment due to moment redistribution from the interior pier, the maximum positive section designed by the elastic method is checked for the strength limit state and the service limit state. The maximum negative moment section is redesigned by reducing the size of the steel girder relative to the section designed by the elastic method and the new section is checked for the service limit state. Based on the design results for the five bridges considered in this study, it is estimated that about 23% of steel can be saved in the interior pier section if it is designed by the inelastic method compared with that designed by the elastic method.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.196-198
• /
• 2011

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.968-978
• /
• 1999

The effective elastic properties of materials containing spherical inclusions were calculated by the elastic wave scattering theory. In the formulation additional scattering fields by the presence of random multiple scatterers that affects the effective properties were found by the single scattering approximation. In calculating the scattering fields the ensemble average on the displacements and strains inside the scatterer was found from the static approximation at long wavelength limit. The displacements were assumed to be equal to the incident field, while the strains were calculated by Eshelby's equivalent inclusion principle on the single inclusion problem. Four different models were considered and they reflected different degrees of multiple scattering effects based on the approximation introduced in the process of embedding the inclusion in the matrix. The expressions for the effective elastic constants were given in each model, and their relations to the results obtained from other scattering theory and elasticity theory were discussed. The theoretical predictions were compared with experimental results on the epoxy matrix composites containing tungsten particles of different sizes and volume fractions

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.335-345
• /
• 2008

In this study, we suggest a stochastic finite element scheme for the probabilistic analysis of the composite laminated plates, which have been applied to variety of mechanical structures due to their high strength to weight ratios. The applied concept in the formulation is the weighted integral method, which has been shown to give the most accurate results among others. We take into account the elastic modulus and in-plane shear modulus as random. For individual random parameters, independent stochastic field functions are assumed, and the effect of these random parameters on the response are estimated based on the exponentially varying auto- and cross-correlation functions. Based on example analyses, we suggest that composite plates show a less coefficient of variation than plates of isotropic and orthotropic materials. For the validation of the proposed scheme, Monte Carlo analysis is also performed, and the results are compared with each other.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.457-465
• /
• 2009

This study presents a moving least squares (MLS) finite difference method for solving elastic crack problems with stress singularity at the crack tip. Near-tip functions are intrinsically employed in the MLS approximation to model near-tip field inducing singularity in stress field. employment of the functions does not lose the merit of the MLS Taylor polynomial approximation which approximates the derivatives of a function without actual differentiating process. In the formulation of crack problem, computational efficiency is considerably improved by taking the strong formulation instead of weak formulation involving time consuming numerical quadrature Difference equations are constructed on the nodes distributed in computational domain. Numerical experiments for crack problems show that the intrinsically enriched MLS finite difference method can sharply capture the singular behavior of near-tip stress and accurately evaluate stress intensity factors.

• Ceramist
• /
• v.8 no.1
• /
• pp.50-56
• /
• 2005

압전재료의 다양한 에너지 변환특성 중 기계-전기 에너지간 변환 특성만을 이용하고자 하는 경우로 한정하고, 압전재료의 물성 및 진동모드, 재료물성 평가 사례들을 요약하여 소개하였다. 그러나 이상에서 설명한 압전특성은 매우 개략적인 개념으로서 우수한 압전 응용부품을 개발하기 위해서는 몇 가지 유의할 사항들이 있다. 압전재료는 보다 기본적으로 열에너지, 기계에너지, 전기에너지, 나아가서 Maxwell 방정식에 의해서 전기장과 연결되는 자기에너지까지도 연결시켜서 상호간에 에너지 변환작용을 일으킬 수 있는 특성을 가진다. 기계적 변형(S) = 탄성변형효과 + 역압전효과 + 열팽창효과 전기적 변위(D) = 압전효과 + 유전효과 + 초전효과 즉, 압전 응용부품이 온도변화 및 자기장이 인가되는 환경에서 순수하게 압전현상만을 이용하고자 한다면, 응용분야 및 주위환경에 따라 압전세라믹 소자가 외부 환경변화에 반응을 하지 않도록 적절한 차단 대책을 수립하여야만 한다. 그러나 압전재료의 외부 자기장의 변화에 대한 반응도는 전기장에 대한 반응도에 비해서 매우 작으므로 통상 무시해도 무방하다고 본다. 그리고 압전재료에서 전기장-기계장의 선형성이 보장되는 크기에는 뚜렷한 한계가 있고, 선형성 영역을 벗어나면 이력특성에 의해 비선형 특성 및 포화상태를 보이게 된다는 점 또한 주의하여야 할 점이다. 또한 압전특성은 Curie 온도이하에서만 존재하고, 그 이상의 온도에서는 쌍극자들의 지나친 운동성에 의해 결정 대칭성이 변하여 압전특성이 소멸되므로 사용 온도 구간에 엄격한 제한을 두어야 함도 응용에 유의하여야 한다.