• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.735-742
• /
• 2010

Objective of this research was to investigate the influence of liming fertilizers on changes in soil chemical properties and growth of pansy 'Melody Yellow' in plug production. To achieve this, dolomite (DO) with 0, 1.0, 3.5, 8.0 or $13.0g{\cdot}L^{-1}$ and calcium carbonate (CC) with 0, 2.0, 2.5, 3.0, 3.5, or $4.0g{\cdot}L^{-1}$ in application rate were incorporated into peatmoss + vermiculite (1:1, v/v) during the formulation. The treatments of $3.5g{\cdot}L^{-1}$ of DO and 2.5 or $3.0g{\cdot}L^{-1}$ of CC had acceptable range of soil solution pH such as 5.6-6.2. Faster rising of pH was observed in root media containing CC rather than those of DO, indicating higher solubility of CC. The soil Ca concentrations in all treatments of CC were 2 times as high as those of DO. The treatments of 3.5 or $8.0g{\cdot}L^{-1}$ of DO had the highest soil Mg concentrations, but all treatments of CC had lower soil Mg concentrations than control indicating that additional applications of Mg fertilizers are required. The elevated application rate of DO or CC resulted in the increase of fresh and dry weight; however, plant heights were not influenced by application of liming fertilizers. The results of tissue analysis showed that application of DO or CC influenced the Ca and Mg contents, but did not influence the contents of other nutrients such as N, P, Fe, Mn, Zn and Cu.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.281-289
• /
• 2015

Carbonation of concrete causes reduction of pH and subsequently causes steel corrosion for reinforced concrete structure. However, for plain concrete structure or PC product, it can lead to a decrease in porosity, high density, improvement of concrete, shrinkage-compensation. Recently, based on this theory, research of $CO_2$ curing effect has been performed, but it was mainly focused on its effects on compressive strength using only ordinary portland cement. Researches on $CO_2$ curing effect for concrete containing $CO_2$ reactive materials such as ${\gamma}-C_2S$, MgO haven't been investigated. Therefore, this study has performed experiments under water-binder ratio 40%, and the replacement ratios of ${\gamma}-C_2S$ and MgO were 90%. Micro-chemical analysis, measurement of compressive strength according to admixtures and $CO_2$ curing were investigated. Results from this study revealed that higher strength was measured in case of $CO_2$ curing compared with none $CO_2$ curing for plain specimen indicating difference between 1.08 and 1.26 times, in case of ${\gamma}-C_2S$ 90, MgO 90 specimen, incorporating high volume replaced as much as 90%, it was proven that when applying $CO_2$ curing, higher strength which has difference between 14.56 and 45.7 times, and between 6.5 and 10.37 times was measured for each specimen compared to none $CO_2$ curing. Through micro-chemical analysis, massive amount of $CaCO_3$, $MgCO_3$ and decrease of porosity were appeared.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1371-1380
• /
• 2007

Study on the instability of waste plastic's thermal pyrolysis oil was carried out for the purpose of improving its quality. The reaction of pyrolysis oil with ozone changed double bonds into aldehydes and ketone, estimated that HDPE pyrolysis oil contained $\sim45$ wt% 1-alkene type olefins, and PP pyrolysis oil did $\sim73$ wt% olefins, which consisted of $\sim47$ wt% secondary and $\sim20$ wt% primary alkenes. The dark brown color and odor of pyrolysis oil were improved by eliminating double bonds, indicated that they were directly related to unsaturated hydrocarbons. Container test showed that metal can affected oil quality worse than the brown glass bottle. Antioxidant added into pyrolysis oil was consumed up to 90% within $2\sim3$ days and the wt. composition of unsaturated hydrocarbons in pyrolysis oil was not changed within 50 days, inferring that instability of pyrolysis oil due to unsaturated bonds can be stabilized by antioxidants. Adsorption test on silica gel, activated carbon and alumina to remove precipitates in oil produced a good result, but not enough to remove moisture. However, cheap anhydrous sodium carbonate showed the best removal efficiency of moisture as well as precipitates in oil. Therefore the pyrolysis oil quality improvement was accomplished by applying anhydrous $Na_2CO_3$ into the production plant.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.47-57
• /
• 2015

The size fractionated atmospheric aerosols have been collected at Gosan site of Jeju Island during 2010~2011, and then their characteristics of acidification and neutralization have been investigated. The anthropogenic $NH_4{^+}$ and nss-$SO_4{^{2-}}$ showed high concentrations mostly at ultra-fine particle mode of $0.7{\sim}1.1{\mu}m$, but they also had a bimodal distribution showing high concentrations at coarse particle mode of $4.7{\sim}5.8{\mu}m$ during Asian Dust periods. The concentrations of nss-$Ca^{2+}$ and $NO_3{^-}$ were relatively high at coarse particle mode of $3.3{\sim}4.7{\mu}m$, especially $NO_3{^-}$ showed high concentrations with a bimodal pattern at both fine and coarse particle modes. The acidification of atmospheric aerosols at Gosan area was contributed mostly by inorganic sulfuric and nitric acids, while the contribution by organic formic and acetic acids was only 1.6~6.4%. Furthermore, the neutralization of acidic species among atmospheric aerosols was performed mostly by $NH_3$, $CaCO_3$ and $MgCO_3$, especially the neutralization by $NH_3$ was high in fine particle mode, while that by $CaCO_3$ was relatively high in coarse particle mode.

• Journal of Veterinary Clinics
• /
• v.31 no.3
• /
• pp.199-205
• /
• 2014

Acidosis conditions either acute or chronic following ingestion of excessive amounts of readily fermented carbohydrate are great production problems for goat in Bangladesh. This study designed to investigate the prevalence of lactic acidosis and then response to different therapeutic agents. For this purpose, 1,128 goat were examined at outdoor District Veterinary Hospital, Faridpur, Bangladseh for treatment of which 40 goats were found positive for lactic acidosis showing 3.55% prevalence of disease. The highest occurrence found in female (4.64%) of over 3 years age (4.64%) in indigenous goat (2.7%). For therapeutic assessment the forty affected goats were divided into four groups A, B, C and D comprising of 10 animals each. Group A were given magnesium hydroxide 8% w/v at 1 g/kg body weight orally. In group B magnesium hydroxide 8% w/v at a dose as group A combination with 7.5% sodium bicarbonate at the rate of 0.9 ml/Kg body weight intravenously administered. Goat in group D were treated with mixture of ginger, nuxvomica, sodium carbonate, cobalt sulphate, dried ferrous sulphate and thiamin mononitrate at the rate of 1 g/kg body weight orally. Goat of group C treated with combination drugs of group A, B and D. The rectal temperature, pulse rate, respiration rate, was performed before and after treatment. It was found that the highest recovery in group C with an average period of $21{\pm}1.8$ hours. It was concluded that lactic acidosis is a common disease of goats and its severity can be effectively reduced by using combination drugs.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.121-131
• /
• 2021

Magnesium (Mg) present in carbonate minerals as impurities has been used as a geochemical proxy to infer the environmental conditions where the minerals precipitated. The reliability of Mg geochemical proxies requires fundamental understanding of Mg incorporation into minerals based on accurate speciation of Mg ²⁺ in the crystal structure, which is determined mainly by application of X-ray absorption spectroscopy (XAS). However, high uncertainties are involved in interpreting the XAS spectra of minerals containing trace amount of Mg ²⁺. Because density function theory (DFT) can predict an XAS spectrum for a crystal structure, DFT calculations can reduce the uncertainties in the interpretation of the XAS spectrum. In this study, we calculated ab initio Mg K-edge absorption spectra of Mg silicates and (hydr)oxides based on DFT and analyzed the correlation between the calculated spectra and Mg structural parameters. Our ab initio Mg K-edge absorption spectra well reproduced the key features of the experimental spectra. The absorption-edge positions of the calculated spectra showed the weak positive correlation with the average Mg-O bond distance or Mg effective coordination number. The current study shows that DFT-based core-level spectroscopy method is a powerful tool in providing standard Mg K-edge spectra of diverse Mg minerals and determining the Mg chemical species within carbonate minerals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.78-87
• /
• 2012

This study is for developing a system for electro-deposition utilizing sea water containing various ions like calcium and magnesium. This is the first step research for the final goal which is a development of anti-corrosive steel for RC structure, so that this paper is mainly focused on the development for electro-deposition system. Optimum conditions for steel coating is obtained through various tests considering anode type, temperature, duration time, and current density. The composition of electro-deposition is analyzed through SEM, EDS, and XRD and it is evaluated to be $CaCO_3$ and $Mg(OH)_2$. Through measuring polarization potential and current density in the coated steel, the coating layer from the developed system is evaluated to have high resistance to steel corrosion. Additional tests and discussions on durability and structural performance in the coated steel from this work will be performed for the second step research.

• Journal of Food Hygiene and Safety
• /
• v.15 no.4
• /
• pp.344-350
• /
• 2000

This study was conducted to determine the content of inorganic metals in soft drinks distributed locally in markets.6 trace metals (Fe, Ca, Zn, Na, Mg, and K) were detected in 16 kinds of drinks,80 samples. The average concentration of inorganic metals in vegetable drinks was relatively higher than that of mixed drinks or carbonated drinks. The concentration of calcium, which is advisable inorganic metals for the growth of skeleton and the prevention of osteoporosis, hypertension, was very high and needed to be careful for the consumer who is suffer with lithiasis. Although carbonated drinks are very popular with the children and adolescence owing to the unbalance of the intake of Ca and P, habitual drinking could cause obstruction in skeletal growth and metabolism of Fe, Cu, and Zn. So, it is suggested that more practical study is needed fur the intake of inorganic metals.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.116-116
• /
• 2018

부식은 재료와 사용 환경과의 상호작용에 의한 결과로서 일반적으로 두께의 감소와 균열의 발생 및 파손 등의 문제로 나타난다. 특히 사용환경 중에서 해수 분위기는 금속의 부식에 가장 유리한 조건이다. 따라서 해양환경 중 항만이나 조선 및 해양 산업 등에 많이 이용되는 강 구조물은 이에 대응하기 위하여 도장방식이나 음극방식을 사용하고 있다. 여기서 음극방식은 피방식체를 일정전위로 음극 분극하는 원리로써 외부전원을 인가하거나 비전위의 금속을 전기적으로 연결하여 방식하는 방법이다[1]. 한편, 해수 중에서 이와 같은 원리로 음극방식 할 경우에는 피방식체인 강재표면에 부분적으로 칼슘 또는 마그네슘 화합물 등의 생성물이 부착하는 현상을 볼 수 있게 된다. 이와 같이 수산화마그네슘($Mg(OH)_2$)및 탄산칼슘($CaCO_3$)을 주성분으로 하여 석출되는 석회질 피막(calcareous deposits)은 피방식체에 유입되는 음극방식 전류밀도를 감소시켜 주거나 물리적 장벽의 역할을 함으로써 외부의 산소와 물 등 부식환경으로부터 소지금속을 보호한다[2]. 그러나 석회질 피막은 소지금속과의 결합력, 막의 균일한 분포, 내식성 및 제작시간의 단축 등 해결해야 할 과제가 있다. 또한 여러 가지 환경 조건 등의 영향을 받아 그 피막의 형성 정도도 가늠하기 어렵기 때문에 음극방식 설계 시 그 정도에 따른 영향을 고려-반영하기가 곤란하다. 따라서 본 연구에서는 석출속도, 밀착성 및 내식특성을 향상시키기 위해 전착프로세스를 통해 해수 중 기체를 용해시켜 석회질 피막을 제작하고 막의 결정구조 제어 및 특성을 분석-평가하였다. 본 연구에 사용된 강 기판(Steel Substrate)은 일반구조용강(KS D 3503, SS400)을 사용하였으며, 외부전원은 정류기(Rectifier, xantrex, XDL 35-5T)를 사용하여 3 및 $5A/m^2$의 조건으로 인가하였다. 양극의 경우에는 해수에 녹아있는 이온 이외에 다른 성분들이 환원되는 것을 방지하기 위해 불용성 양극인 탄소봉(Carbon Rod)을 사용하였다. 이때 석출속도, 밀착성 및 내식특성 향상을 위해 해수에 주입한 기체의 양은 0.5 NL/min였으며, 기판 근처에 고정하여 음극 부근에서의 반응을 유도하였다. 각 조건별로 제작된 막의 표면 모폴로지, 조성원소 및 결정구조 분석을 실시하였으며, 석회질 피막의 밀착성과 내식특성을 평가하기 위해 규격에 따른 테이핑 테스트(Taping Test, ISO 2409)와 3 % NaCl 용액에서 전기화학적 양극 분극 시험을 진행하여 제작된 막의 내구성과 내식성을 분석-평가하였다. 시간에 따른 전착막의 외관관찰 결과 전류밀도의 증가와 함께 상대적으로 많은 피막이 형성되었고, 용해시킨 기체에 의해 더 치밀하고 두터운 피막이 형성됨을 확인할 수 있었다. 성분 및 결정구조 분석 결과 $Mg(OH)_2$ 성분의 Brucite 및 $CaCO_3$ 성분의 Calcite 및 Aragonite 구조를 확인하였으며, 용해시킨 기체의 영향으로 $CaCO_3$ 성분의 Aragonite 구조가 상대적으로 많이 검출되었다. 밀착성 및 내식성 평가를 실시한 결과 해수 중 용해시킨 기체에 의해 제작한 시편의 경우 견고하고 화학적 친화력이 높은 Aragonite 결정이 표면을 치밀하게 덮어 전해질로부터 산소와 물의 침입을 차단하는 역할을 하여 기체를 용해시키지 않은 3 및 $5A/m^2$ 보다 비교적 우수한 밀착성 및 내식 특성을 보이는 것으로 사료된다.