• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.45-55
• /
• 2002

중거리 유도무기 체계가 탄도탄과 같이 기동이 심한 표적과 교전할 때에는 지상 레이더는 표적 및 유도탄 위치정보를 보다 빈번하게 전송하여야 하지만, 자신의 임무를 수행해야 하므로 유도탄 및 교전 표적에 대한 정보를 필요이상으로 자주 전송할 수 없다. 이러한 상황에서 탐색기가 자체적으로 표적의 거리, 속도, 방향을 측정함으로서 지상레이더에 추가 부담을 지우지 않고 우수한 추적 정밀도로 교전성능을 향상할 시킬 수 있는 고반복 펄스열을 사용하는 PRF 변조방식을 제안한다.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.189-201
• /
• 2001

For a design of multi-layer armor, the extensive full scale or sub-scale penetration test data are required. In generally, the collection of penetration data is in need of time-consuming and expensive processes. However, the application of numerical or analytical method is very limited due to poor understanding about penetration mechanics. In this paper, we have developed a neural network analyzer which can be used as a design tool for a new armor. Calculation results show that the developed neural network analyzer can predict relatively exact penetration depth of a new armor through the effective analysis of the pre-existing penetration database.

• 한국항공우주학회지
• /
• 제38권11호
• /
• pp.1081-1086
• /
• 2010

120 mm 박격포탄 중 RAP탄에 사용된 혼합형 고체로켓추진제의 조성 및 탄 형상을 설계하여 탄에 적용된 추진기관의 성능을 분석하고, 해당 성능에 관련하여 외탄도 성능을 비교함으로서 일련의 탄 성능 개량의 절차와 과정을 수행하였다. 혼합형 추진제의 기본적인 특성을 위해, 성능해석과 더불어 추진기관의 지상연소시험을 수행하여 분석하고, 탄의 발사시험으로 기존 탄에 비해 70% 사거리 연장에 대한 성능을 얻을 수 있었다.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.5-12
• /
• 2004

The erosion wear of gun barrel occurs due to heat and chemical reactions. The high pressure and temperature in chamber increase the erosion wear. It is known that the metal phase transfer is the primary wear factor in a gun barrel under high temperature. In this paper, the tool of wear prediction in high pressure gun tube has been developed. The program developed has three modules such as DIRECT(interior ballistics analysis module), INVERSE(gun design module), and WEAR(wear prediction module). The prediction of wear was compared with the experimental data which was collected in the field unit. The prediction results shows good trend with the collected data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제10회 학술강연회논문집
• /
• pp.35-35
• /
• 1998

고체 로켓 추진기관의 노즐을 개발하기 위해서는 주어진 체계 제한 조건내에서 기본적인 가스의 동력학, 내탄도에 의한 형상 설계, 재료 개발 및 적용 기술, 열전달 계산에 의한 열설계 및 해석 등이 종합적으로 적용되며 수많은 반복과정을 거쳐야 한다. 특히 최근에는 알루미늄 함유량을 증가시켜 연소가스의 온도가 300$0^{\circ}C$ 이상이 되는 고성능 추진제가 일반적으로 적용되고 있으므로 고온에 의한 열적문제가 심각하게 대두되고 있으며 이에 견디는 신뢰도가 높은 노즐 설계개발이 요구되고 있다. 노즐목을 노즐내에서 열부하가 가장 심한 곳으로 노즐목 확대에 의한 추력 손실을 최소화하기 위해 내삭마성이 강한 재료를 선정하여야 하며, 그래파이트는 이러한 조건을 만족시키는 소재의 하나로 많이 적용되고 있다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.739-744
• /
• 2013

In this paper, we propose a method of generating pitch commands for consistent initial trajectories irrelevant to flight conditions in the initial boosting phase of a thrust-vector-controlled vehicle. After shape assumption of the pitch command profile, parameters of the profile are determined in real time in order for the summit height of the trajectory to be a desired value by deriving the summit height considering thrust performance, gravity, and other flight conditions. Computer simulation results demonstrate good performance of the proposed method.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.803-810
• /
• 2013

In this paper, we have verified the performance of ballistic resistance material on wet condition. Considering Korea terrain, soldiers may face many rivers and streams. However, bullet-proof jacket has no waterproofing and there's no water-proof standard in Military. Wearing wet bullet-proof jacket, soldiers can't be protected properly because of the decrement of jacket. Thus, we measure the performance of existing material on wet condition and analyze failure mechanism in order to indicate factors to improve bullet-proof jacket.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.752-761
• /
• 2013

A new gun fire control system has been developed for the Korean next generation frigate class. The engineering requirement was far more tightened than the PKG-A class for the firing range availability and gun control function since 5 inch gun is adopted for the new ship. We mention about the principal technologies required to build a generic gun fire control system and proposed methods for the new gun fire control system. The new system has been designed based on the proposed methods in order to satisfy the requirement and functionality has been proved to be acceptable through the sea trial by Korean navy.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.355-363
• /
• 2024

This study proposes a method for determining the optimal target size for an artillery range considering ballistics and environmental conditions. To this end, the size of the probable error of each type of ammunition and charge determined during shooting were considered, and the effect of the firing position and target terrain characteristics on the target size was analyzed. In conclusion, the size of the target increased as the range increased, and a larger target size was required for the DPICM than for the general high explosive. Accordingly, the optimal target size must be determined by considering various factors such as topographical characteristics, shooting position location, and shooting range safety standards.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.31-42
• /
• 2024

In this study, the methodology of determination of base bleed motor data for base bleed projectile based on the NATO standard trajectory model, especially STANAG 4355 Method 2 were presented. Ground combustion experiments and aerodynamic performance firing tests were conducted to determine the drag reduction motor data of the base bleed projectile and this data was described based on the NATO standard ballistic model. The derived drag reduction motor data were input into the ballistic equations to complete the ballistic model and it was confirmed that the calculated predicted trajectory from the ballistic model matched well with the measured trajectory from the aerodynamic performance firing tests.