• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1783-1788
• /
• 2003

In this study, the image processing program for deducing parameters of the elliptic shape of the partially overlapped liquid droplets was developed using the randomized Hough transform and the parameter decomposition. The procedure for the shape detection consists of three steps. For the first step, the candidate centers of ellipses are determined by the geometric property of the ellipse. Next, the rest parameters are estimated by the randomized Hough transform. In the final step for the post-processing, optimally approximated parameters of ellipses are determined. The developed program was applied to the simulated overlapped ellipses, real overlapped droplets, and real spray droplets. The shape detection was very excellent unless there existed inherent problems in original images. Moreover, this method can be used as an effective separating method for the overlapped small particles.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.459-466
• /
• 2000

Flow characteristics of turbulent elliptic jets were experimentally investigated using a single-frame PIV system. A sharp-edged elliptic nozzle with aspect ratio(AR) of 2 was tested and the experimental results were compared with those of circular jet having the same equivalent diameter($D_e$). The Reynolds number based on the nozzle exit velocity and nozzle equivalent diameter was about $1{\times}10^4$. The spreading rate along the major and minor axis are different remarkably. The jet half width along the major axis decreases at first and then increases with going downstream. But along the minor axis the jet width increases steadily. The elliptic jet of AR=2 has one switching points at $X/D_e=2$ within the near field. Turbulence properties are also found to be significantly different along the major and minor axis planes.

• 자동차안전학회지
• /
• 제7권2호
• /
• pp.39-43
• /
• 2015

NDIR (Non-dispersive infrared Rays) alcohol sensor has been prototyped and its temperature characteristics were measured. In order to design novel optical alcohol sensor, elliptical structures with one common foci were modeled and analyzed their optical properties. After analyzing elliptic optical structures, a prototype alcohol sensor module was tested according to the temperature variations from $-20^{\circ}C$ to $35^{\circ}C$. The offset voltages of alcohol sensor decreased from 1.1056 V at the temperature $-20^{\circ}C$ to 0.7339 V at $35^{\circ}C$. However, the highest sensitivity of alcohol sensor showed about $303{\mu}V/ppm$ at room temperature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.165-170
• /
• 2000

The weight function method is an efficient technique to calculate the stress intensity factors for various loading conditions in that only the stress analysis of an uncracked model is required. This paper analyzes the mixed-mode stress intensity factors of surface and deepest points for quarter elliptical surface cracks in mechanical joints by weight function method and the coefficients included in weight function are determined by finite element analyses for reference loadings. Results for the different number of terms in weight function are presented.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.101-108
• /
• 1999

Most of researches for deep drawing process have been performed on the formability of axisymmetric blank, but there is an insufficient study on the formability of non-axisymmetric blank. In addition, the conventional blank shape has been determined by the trial-and-error method using industrial experience and post processing test. Therefore only approximated shape of the blank can be presented. In this study, the optimal blank shape and concrete drafting method in deep drawing process with biaxisymmetric elliptical shape is proposed. Through the deep drawing experiment, it is found that the optimal blank shape gives the most uniform thickness of the products in the first process

• 한국해양학회지
• /
• 제19권1호
• /
• pp.18-23
• /
• 1984

타원형 섬에 의한 조석파의 산란 이론에 근거하여, 제주도 주변의 M$_{2}$ 반일주조 조석을 구명하였다. 제주도를 수심이 일정한 해양 가운데 놓여있는 타원형의 섬으로 근사화한 후, 입사파와 산란파의 진폭을 연안 경계조건와 7개 검조소의 조화상수에 대한 최소자승법을 통하여 결정하였다. 이와 같은 이론식에 근거하여 제주도 주변M$_{2}$조에 대한 조석도를 해석적으로 작성하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.570-576
• /
• 2007

수중천퇴가 있는 지형을 통과하며 변형하는 파랑을 실험한 Vincent와 Briggs (1989)의 실험조건을 수치모의하여 파랑과 흐름의 상호작용 효과를 연구하였다. SHORECIRC 흐름모형을 결합한 파랑모형 REF/DIF 1과 SWAN, 그리고 파랑과 흐름을 동시에 수치모의 할 수 있는 FUNWAVE를 이용하여 수중천퇴상을 통과하며 변형하고 또 다시 수중천퇴상에서 발생한 쇄파에 의해 발생된 쇄파류에 의해 변형하는 규칙파를 수치모의하였다. 수중천퇴상에서 쇄파가 발생할 때 잉여파응력의 급격한 변화에 따른 강한 유사제트류가 발생하고, 이 흐름은 수중천퇴후면의 파집중현상을 방해하여 파랑을 천퇴중심축으로부터 바깥쪽으로 굴절시켜, 파고를 상대적으로 감소시키는 역할을 한다. 이러한 역학은 실험결과와 본 연구의 수치모의를 통해 확인할 수 있었고, 이는 파랑쇄파류의 파랑변형에 미치는 역할의 중요성을 확인시켜주는 것이다. 규칙파 모의에 한계가 있는 SWAN과 규칙파 특성상 강하게 나타나는 중복파의 잉여파응력계산에 한계가 있는 REF/DIF 1과 달리 FUNWAVE를 이용한 수치모의는 실험결과와 완벽히 일치하였으며, 수중천퇴 후면에 발생하는 쇄파류와 쇄파류에 의한 쌍 vortex의 발달과정을 잘 보여 주었다.

• 한국분무공학회지
• /
• 제18권1호
• /
• pp.44-54
• /
• 2013

An experimental study was performed to investigate the liquid jet breakup of a circular nozzle and elliptical nozzles. Furthermore Numerical simulation was attempted to investigate the internal flow structure in the circular and elliptical nozzles. This study showed that the disintegration characteristics of the liquid jet of elliptical nozzles were much different from those of the circular nozzle. The liquid jet issued from the elliptical nozzles became more unstable at the same injection pressure. Surface breakup was observed at the jet issued from the elliptical nozzles with the increase of injection pressure. The disintegration of the liquid jet of elliptical nozzles was related with the internal flow structure which is revealed from the numerical simulation.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.38-44
• /
• 2004

The motion response analysis of a submerged elliptic cylinder in waves is presented and the elliptic cylinder is a simplification of the section of submarine in this paper. The method is based on boundary integral method and two-dimensional 3 degree motions are calculated in regular harmonic waves. The fully nonlinear free surface boundary condition is assumed in an numerical domain and this solution is matched along an assumed boundary as a linear solution composed of transient Green function, The large amplitude motions of an elliptic cylinder are directly simulated and effects of wave frequency, wave amplitude and the distance from buoyancy center to gravity center are discussed.

• 한국분무공학회지
• /
• 제23권1호
• /
• pp.9-15
• /
• 2018

Breakup lengths of circular and elliptical liquid jets in a subsonic crossflow were experimentally studied. Two circular-shaped and four elliptical-shaped plain-orifice injectors, which had different aspect ratios and orifice length to diameter ratios, were used to provide various liquid jet conditions such as steady, cavitation, and hydraulic flip. By varying the injection pressure drop from 1 bar to 6 bar, spray images were taken using a shadowgraph technique. Breakup lengths were measured and analyzed. As the aspect ratio in orifices increased, liquid column breakup lengths normalized by the equivalent diameter were reduced irrespectively of the switching of the major or minor axis to the crossflow. It was also found that when hydraulic flip developed inside the orifice, x-directional breakup lengths more decreased for both circular and elliptical liquid jets.