1 |
A. Sou, M. I. Maulana, K. Isozaki, S. Hosokawa and A. Tomiyama, "Effects of nozzle geometry on cavitation in nozzles of pressure atomizer", J. Fluid Sci. Tech., Vol. 3, No. 5, 2008, pp. 622-632.
DOI
|
2 |
W. Bergwerk, "Flow pattern in diesel nozzle spray holes", Proc. Inst. Mech. Eng., 1959, pp. 655-660.
|
3 |
K. Ramamurthi, K. Nandakumar and R. Patnaik, "Twostep start transient with long feedlines discharging liquid through sharp-edged cylindrical nozzles", Atomization Sprays, Vol. 12, 2002, pp. 283-297.
DOI
|
4 |
N. Tamaki, M. Shimizu, K. Nishida and H. Hiroyasu, "Effects of cavitation and internal flow on atomization of a liquid jet", Atomization Sprays, Vol. 8, 1998, pp. 179-197.
DOI
|
5 |
S. B. Martynov, D. J. Mason and M. R. Heikal, "Numerical simulation of cavitation flows based on their hydrodynamic similarity", Int. J. Engine Research, Vol. 7, 2006, pp. 283-296.
DOI
ScienceOn
|
6 |
한동식, 김현규, 장영준, 전충환, "노즐 형상비에 따른 캐비테이션 및 내부유동 특성에 관한 수치적 연구", 한국액체미립화학회지, 제13권, 제4호, 2008, pp. 200-205.
|
7 |
H. V. Tafreshi and H. Pourdeyhimi, "Simulating cavitation and hydraulic flip inside hydroentangling nozzles", Textile Res. J., Vol. 74, 2004, pp. 359-364.
DOI
|
8 |
T. Oda, M. Hiratsuka, Y. Goda, S. Kanaike and K. Ohsawa, "Experimental and numerical investigation about internal cavitating flow and primary atomization of a large-scaled VCO diesel injector with eccentric needle", 23th Annual Conf. on Liquid Atomization and Spray Systems, Brno, Czech Republic, Sep 6-8, 2010. [CD-ROM]
|
9 |
S. Som, M. B. Alejandro and S. K. Aggarwal, "Evaluation of new criteria for cavitation inception in diesel injectors", 11th Int'l Conf. on Liquid Atomization and Spray Systems, Vail, Colorado, USA, July 26-30, 2009. [CD-ROM]
|
10 |
S. Som, S. K. Aggarwal, E. M. EI-Hannouny and D. E. Longman, "Investigation of nozzle flow and cavitation characteristics in a diesel injector", ASME J. Eng. Gas Turb. Power, Vol. 132, issue 4, 2010.
|
11 |
J. G. Hong, K. W. Ku, S. R. Kim and C. W. Lee, "Effect of cavitation in circular nozzle and elliptical nozzles on the spray characteristic", Atomization Sprays, Vol. 20, 2010, pp. 877-886.
DOI
|
12 |
J. G. Hong, K. W. Ku and C. W. Lee, "Numerical simulation of the cavitating flow in an elliptical nozzle", Atomization Sprays, Vol. 21, 2011, pp. 237-248.
DOI
|
13 |
K. W. Ku, J. G. Hong and C. W. Lee, "Effect of internal flow structure in circular and elliptical nozzle on spray characteristics", Atomization Sprays, Vol. 21, 2012, pp. 655-672.
|
14 |
A. K. Singhal, M. M. Athavale, L. Huiying and Y. Jiang, "Mathematical basis and validation of the full cavitation model", ASME J. Fluids Eng., Vol. 124, 2002, pp. 617-624.
DOI
ScienceOn
|
15 |
Fluent Inc, Fluent user's guide volume 3, Fluent Inc, 2003, pp. 22.1-22.96.
|
16 |
김성열, 구건우, 홍정구, 이충원, "노즐 오리피스 형상에 따른 Discharge coefficient와 cavitation에 관한 실험적 연구", 대한기계학회 논문집 B권, 제34권, 제10 호, 2010, pp. 933-939.
|
17 |
이상용, 액체의 미립화, 민음사, 1996.
|
18 |
Y. Hayashi, T. Furuhata and M. Arai, "Effect of nozzle hole shape on behavior of diesel spray", 14th Symposium (ILASS-JAPAN) on Atomization 2005, 2005, pp. 37-42.
|
19 |
G. Yunyi, L. Changwen, H. Yezhou and P. Zhijun, "An experimental study on droplet size characteristics and air entrainment of elliptic sprays", SAE Tech. Pap, 1998, 982546.
|
20 |
C. W. Lee, Y. J. Lee, J. W. Park, and K. Terasima, "Effect of nozzle hole configuration on spray characteristics for diesel engine", 10th Annual Conf. on Liquid Atomization and Spray Systems, Seoul, Korea, Oct 13-14, 2005, pp. 267-272.
|
21 |
L. Jacobsson, E. Winklhofer and J. Chomiak, "Injection orifice shape: Effects on spray characteristics and heat-release rate in a large-size single-cylinder diesel engine", SAE Tech. Pap., 1999, 1999-01-3490.
|
22 |
T. Messina and S. Acharya, "Characteristics of an acoustically modulated spray issued from circular and elliptical orifice nozzles", Atomization Sprays, Vol. 16, 2006, pp. 331-348.
DOI
|
23 |
E. J. Gutmark and F. F. Grinstein, "Flow control with noncircular jets", Annu. Rev. Fluid Mech., Vol. 31, 1999, pp. 239-272.
DOI
ScienceOn
|
24 |
T. V. Kasyap, D. Sivakumar and B. N. Raghunandan, "Breakup of liquid jets emanating from elliptical orifices at low flow condition", Atomization Sprays, vol. 18, 2008, pp. 645-668.
DOI
|
25 |
Carsten B, Mixture formation in internal combustion engines: Springer, 2006.
|
26 |
A. H. Lefebvre, Atomization and Sprays, New york: Hemisphere Publishing Corporation, 1989.
|
27 |
P. K. Wu, R. F. Miranda and G. M. Faeth, "Effects of initial flow conditions on primary breakup of non-turbulent and turbulent round liquid jets", Atomization Sprays, Vol. 5, 1995, pp. 175-196.
DOI
|
28 |
H. Hiroyasu, M. Arai and M. Shimizu, "Break-up length of a liquid jet and internal flow in a nozzle", Proc. of the Fifth Int'l Conf. on Liquid Atomization and Spray Systems, Gaithersburg, MD, USA, 1991, pp. 275-282.
|
29 |
F. Payri, V. Bermudez, R. Payri and F. J. Salvador, "The Influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzle", Fuel, Vol. 83, 2004, pp. 419-431.
DOI
ScienceOn
|
30 |
J. K. Song, K. B. Ahn, M. K. Kim and Y. B. Yoon, "Effects of orifice internal flow on liquid jets in subsonic crossflows", J. Propul. Power, Vol. 27, 2011, pp. 608-619.
DOI
ScienceOn
|