• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.171-178
• /
• 2001

The nonlinearity of a laser interferometer usually ranges from sub-nanometer to several manometers. This nonlinearity, which has periodic characteristics, limits the accuracy of the interferometer at the sub-nanometer level. The nonlinearity error of the one-frequency homodyne interferometer with quadrature fringe detection results from a number of factors including polarization mixing by imperfect optical elements, unequal gain of photo detectors, lack of quadrature between two signals and misalignment. In this paper, we described a method for measuring and compensating the nonlinearity of homodyne interferometer using the elliptical fitting technique with least-square method. Experimental results demonstrate that $^\pm$3.5 nm nonlinearity can be reduced to $^\pm$0.2 nm level.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1999

In this paper the forming simulations of ellipse bulge have been researched by using $PAM-STAMP_{TM}$ to estimate the sheet metal forming and the plastic deformation characteristic of ellipse bulge. Thin elliptical diaphragms of brass, copper, aluminum, and mild steel are bulged in elliptical dies having aspect ratios of 1.33 and 2. In order to compare the simulation results with the experiment and ellipse bulge's theory derived by using Johnson and Duncan's theory, the relations of hydraulic pressure and polar height, polar thickness strain and polar height, were compared. According to this study, the results of simulation and ellipse bulge's theory derived by using Johnson and Duncan's theory, and the bursting pressure and the bursting polar height are good agreement to the experiment. So, the results of simulation by using $PAM-STAMP_{TM}$ and the ellipse bulge's theory will give engineers good information to make assessment the formability and plastic deformation characteristic of hydraulic ellipse bulge test.

• 소음진동
• /
• 제3권3호
• /
• pp.271-278
• /
• 1993

Acoustic characteristics of silencer system are affected by various geometric parameters such as cross sectional geometry, size of chamber, and location of inlet-outlet port. It is impossible to obtain exact solutions of the equations of acoustic wave propagation except few simple cases. So, we resort to numerical techniques to analyze performance of acoustic system. In this work, finite element formulation has been obtained to predict transmission loss of an arbitrary 3-dimensional muffler in the presence of mean flow of low mach number. The effect of the degree of the ellipticity of expansion chambers on the transmission loss has been studied using the resulting finite element equation.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.45-50
• /
• 2007

For a long partially-filled membrane container on an incline, the analytic solution of the similarity shape is studied. The nonlinear equation is solved and its solution is expressed as elliptic integrals, which include an unknown at the point of inflection. The point of inflection is determined by using the boundary condition at the upper separating point. Some characteristic values of the universal shape are evaluated, as the functions of inclination angle and shapes are illustrated for some cases.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.32-37
• /
• 2009

An analytic similarity shape solution was studied for a two-dimensional floating and fluid-filled membrane structure. The static shape of a membrane structure can be expressed as a set of nonlinear ordinary differential equations. The integration of curvature leads to an analytic solution for the shape, which contains unknown boundary values. Matching the upper and lower shapes at the free surface incorporated with their buoyancy allowed the unknowns to be determined. Some characteristic values of similarity shapes were evaluated and shapes are illustrated for various density ratios and volume efficiency ratios.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.88-95
• /
• 2002

본 연구에서는 균열 치유 거동을 가지는 소결된 Mullite/SiC의 모재, 열처리재, 균열재, 치유 균열재의 기계적 특성이 논의되었다. 반타원형 균열의 치수는 $100{\mu}m$ 과 $200{\mu}m$이다. 얻어진 결과는 다음과 같다. (a) Mullite/SiC 복합 세라믹스는 균열 치유 능력이 있었다. (b) 최적의 균열 치유 열처리 조건은 $1300^{\circ}C$, 1시간이었다. (c) 치유 가능한 최대 균열 길이는 직경 $100{\mu}m$의 반타원 균열이다. (d) 균열 치유부는 $1200^{\circ}C$이상에서 충분한 강도를 가졌고, 대부분의 시험편은 균열 치유부 이외의 영역에서 파단 하였다. (e) 공기중에서 예열처리는 본 재료의 피로강도 향상에 유용하였다.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.76-82
• /
• 1998

In this study, the Ball screw and Servo motor Mechanism is considered as a High Speed Tool Feed System for the machining of a piston of a reciprocating engine. For the machining of a piston, that shapes oval, high speed servo mechanism is needed as a positioning of a cutting tool, and the stroke of tool is 0.1 mm ~ 1 mm. Ball screw and servo motor Mechanism is available very much because this mechanism is used widely in general machine. This Mechanism has been designed with the use of the decrease in mass and partial wear of the ball screw for high speed positioning of tool. Also the periodic learning control method with the inverse transfer function compensation has been applied to the positioning control for the high accuracy positioning of tool. These applications lead the achievement of the machining of a piston with an accuracy of 5${\mu}{\textrm}{m}$ at 2500 rpm in CNC turning.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.167-174
• /
• 1998

This paper presents an unoccluded cylindrical object pose measurement using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. The elliptical equation parameters of a projected curve edge on a slice are calculated using LSM. The coefficients of standard elliptical equation are compared with these parameters to estimate the object pose. The hamming distances between the estimated coordinates and the calculated ones are extracted as measures to evaluate a local constraint and a smoothing surface curvature. The edges between slices are linked using error function based on the edge types and the hamming distances. The linked edges on slices are compared with the model object's length to recognize the unoccluded object. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as punch press operation or part assembly.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 춘계학술발표대회
• /
• pp.1515-1518
• /
• 2009

최적정규기저(Optimal Normal Basis)를 이용한 $GF(2^m)$상의 곱셈은 ECC(Elliptic Curve Cryptosystems: 타원곡선 암호시스템) 및 유한체 산술 연산의 하드웨어 구현에 적합하다는 것은 잘 알려져 있다. 본 논문에서는 최적정규기저의 하드웨어적 장점을 이용하여 합성체(Composit Field)상의 곱셈기를 제안하며, 기존에 제안된 합성체상의 곱셈기와 비교 및 분석한다. 제안된 곱셈기는 최적정규기저 타입 I, II의 대칭성과 가수의 중복성을 이용한 열벡터의 재배열에 따른 XOR 연산의 재사용으로 낮은 하드웨어 복잡도와 작은 지연시간을 가진다.