• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.354-360
• /
• 2013

In this paper, it is discussed that the detection and tracking performance of the piecewise linear path underwater target is improved using clutter reduction algorithm in heavy clutter density environment. Through clutter reduction algorithm using Hough Transform, measurements which represent clutter features are removed and the performance of target tracking on the remaining measurements is demonstrated applying CMKF-L(Converted Measurement Kalman Filter with Linearization) as tracking filter. Algorithm performance test is conducted using simulation data and real sea-trial data and by applying the proposed algorithm in heavy clutter density environment, it is confirmed that the target is tracked consistently and stably with clutter rejected measurements.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.157-164
• /
• 2005

The conventional adaptive detectors can not maintain sufficient detection performance at the presence of non-stationary clutter with unknown characteristics. This is caused by the lack of a priori information about clutter parameters changing over radar coordinates. To solve this problem, it is necessary to use clutter classifiers which have functions, such as the selection of the applied algorithm and its parameters extraction according to clutter conditions. In this paper, we describe the implementation of a clutter environment classifier for adaptive processing. In the environment classifier implemented on Visual C++, the extraction of the parameters and selection of processing algorithm for the adaptive processing unit are possible, and the result of algorithms can be verified at each stage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.275-282
• /
• 2019

Clusters generated by features such as mountains or buildings are considered as the contaminated data that are independent of atmospheric phenomena. The basic way to reduce the clutter signal is to install a clutter fence around the wind profiler. In order to investigate the effect of clutter fence on the wind profiler data, the wind vector collection rate and wind vector accuracy of wind profiler was investigated before and after clutter fence installation. The clutter fence of wind profiler contributed to improve the data quality as well as the data collection rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.602-605
• /
• 1995

In this paper, we provide the new alogorithm for maneuvering target tracking in clutter environment using perception net. The perception net, as a structural representation of the sensing capabilities of a system, may supply the constraints that target must be satisfied with. The results form perception net applying to IMMPDA are compared with those obtained from IMMPDA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.389-398
• /
• 2019

In this paper, we propose a method to detect small unmanned aerial vehicles(UAVs) flying in a real-world environment. Small UAV signals are frequently obscured by clutter signals because UAVs usually fly at low altitudes over urban or mountainous terrain. Therefore, to obtain a desirable detection performance, clutter signals must be considered in addition to noise, and thus, a performance analysis of each clutter removal technique is required. The proposed detection process uses clutter removal and pulse integration methods to suppress clutter and noise signals, and then detects small UAVs by utilizing a constant false alarm rate detector. After applying three clutter removal techniques, we analyzed the performance of each technique in detecting small UAVs. Based on experimental data acquired in a real-world outdoor environment, we found it was possible to derive a clutter removal method suitable for the detection of small UAVs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.441-448
• /
• 2018

Recently, measurements on clutter loss due to buildings in urban/suburban areas at 3, 6, 10, 18, and 24 GHz have been performed by the Radio Research Agency with the purpose of predicting the clutter loss close to actual urban/suburban propagation for 5G mobile communication. In this work, we have compared the urban clutter loss to suburban clutter loss for a transmit antenna height of 85 m. Furthermore, we have estimated the error between the predicted loss as per ITU-R P.2108 and the measured clutter loss. Our results indicate that for higher frequencies, the measured clutter loss in urban/suburban areas is higher and so lower than the predicted clutter loss. In conclusion, it is necessary to improve the prediction model for clutter loss by taking into account the measured clutter loss in urban/suburban areas in the prediction model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.365-372
• /
• 2019

We propose a method to estimate unknown parameters(e.g., target amplitude and clutter parameters) in the generalized likelihood ratio test(GLRT) using maximum likelihood estimation and the Newton-Raphson method. When detecting targets in a clutter environ- ment, it is important to establish a modular model of clutter similar to the actual environment. These correlated clutter models can be generated using spherically invariant random vectors. We obtain the GLRT of the generated clutter model and check its detection probability using estimated parameters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.109-115
• /
• 2020

As the maritime targets that threaten allies become lower, smaller, and faster, the need for analysis and modeling of clutter according to sea state increases. Clutter according to the sea state has a great influence on radar performance, such as lowering the probability of detection of low-altitude small maritime targets. In this paper, to analyze the detection performance of a multi function radar for a ship, a sea clutter model suitable for the radar operating environment is selected from several sea clutter models, and analysis of low-altitude, small target detection under a clutter is performed. By using the actual data of the already mounted radar for maritime target detection, four known clutter models have been implemented for each sea state and compared with the actual data. Through this, by selecting a clutter model that best reflects the actual radar environment, reliability of the clutter model is improved. Subsequently, the selected model is used to detect the detectable distance to the low-altitude small target.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.825-831
• /
• 2017

Radar clutter in real environment is in general heterogeneous and especially nonstationary if radar geometry is of non-sidelooking monostatic structure or bistatic structure. These clutter properties lead to the insufficient number of secondary data of IID(Independent identically distributed) property, conclusively deteriorate clutter suppression performance. In this paper, we propose a clutter suppression algorithm that estimates the clutter signal belonging to cull under test via calculation using only prior information, rather than using the secondary data. Through analyzing the angle-Doppler spectrum of the clutter signal, we show the estimation of the clutter signal using prior information only is possible and present the derivation of a clutter suppression algorithm through eigen-value analysis. Finally, we show the performance of the proposed algorithm by simulation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.140-146
• /
• 1989

In many situations, radar targets are embedded in a clutter environment and clutter rejection is required. The clutter is unwanted radar echoes and may arise owing to reflections from ground and weather disturbances and statistical properties of the clutter vary with range and azimuth as well as time. That is, adaptive signal processing is required. In this paper, a clutter suppression algorithm based on the clutter whitening filter (WF) and doppler filter bank(DFB) is described which provides improved performance compared with conventional nonadaptive clutter suppression algorithm that is the cascaded moving target indicator (MTI) and (DFB). The clutter whitening filter algorithm is based on the Burg's maximum entropy method.