• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.369-374
• /
• 2015

In order to efficiently optimize the problem involving complex computer codes or computationally expensive simulation, surrogate models are widely used. Because their accuracy significantly depends on sample points, many experimental designs have been proposed. One approach is the sequential design of experiments that consider existing information of responses. In earlier research, the correlation coefficients of the kriging surrogate model are introduced as weight parameters to define the scaled distance between sample points. However, if existing information is incorrect or lacking, new sample points can be misleading. Thus, our goal in this paper is to propose a weight function derived from correlation coefficients to generate new points robustly. To verify the performance of the proposed method, several existing sequential design methods are compared for use as mathematical examples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.817-823
• /
• 2017

In the past, research has been conducted on the development of an adaptive cruise control algorithm considering fuel efficiency, and an adaptive cruise control system considering fuel efficiency have been developed. However, research on optimizing vehicle and adaptive cruise control parameters in order to maximize performances is insufficient. In this study, the design optimization of vehicle and control parameters considering fuel efficiency, trackability, ride comfort and safe distance is performed. This paper proposes performance measures of vehicle behavior and develops an adaptive cruise control system. In addition, based on the screening of vehicle parameters that significantly influence performances, kriging surrogate models are constructed through a sequential design of experiment, and kriging surrogate model-based design optimization is performed to maximize fuel efficiency and satisfy target performances.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.95-101
• /
• 2024

This paper introduces an optimized design for a sensor bracket used to measure the wear amount of an automobile brake pad, based on a dynamic kriging surrogate model. During testing, the temperature of the brake pad can increase beyond 600℃, which often causes sensor malfunction. Therefore, it is essential to optimize the shape of the sensor bracket to minimize heat transfer. To reduce the computational cost of the optimization, the heat-transfer simulation is replaced by a dynamic kriging surrogate model. Dynamic kriging utilizes the best combination of correlation and basis functions and constructs an accurate surrogate model. Following optimization, the temperature of the sensor position decreases by 7.57%. The results from the surrogate model under optimum conditions are verified by a heat-transfer simulation, and the design optimization using a surrogate model is found to be effective.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.587-593
• /
• 2016

Reliability-based design optimization (RBDO) requires a high computational cost owing to its reliability analysis. A surrogate model is introduced to reduce the computational cost in RBDO. The accuracy of the reliability depends on the accuracy of the surrogate model of constraint boundaries in the surrogated-model-based RBDO. In earlier researches, constraint boundary sampling (CBS) was proposed to approximate accurately the boundaries of constraints by locating sample points on the boundaries of constraints. However, because CBS uses sample points on all constraint boundaries, it creates superfluous sample points. In this paper, efficient constraint boundary sampling (ECBS) is proposed to enhance the efficiency of CBS. ECBS uses the statistical information of a kriging surrogate model to locate sample points on or near the RBDO solution. The efficiency of ECBS is verified by mathematical examples.

• Journal of Aerospace System Engineering
• /
• v.18 no.2
• /
• pp.104-116
• /
• 2024

A satellite is ultimately verified by performing a coupled load analysis with the launch vehicle. To increase the accuracy of the coupled load analysis results, it is important to have good accuracy of the finite element model. Therefore, finite element model correlation is essential. In general, model correlation is performed by changing the material properties and thickness one by one, but this process takes a lot of time and cost. The current paper proposes an efficient model correlation method using optimization. Significant variables were selected through analysis of variance, and the time and cost required for analysis and optimization were reduced by using the Kriging surrogate model. The method proposed in this paper can be applied only with the vibration test results, and it has a great advantage in terms of efficiency in that it can significantly reduce the numerical calculation cost and time required.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.49-62
• /
• 2022

Borehole Data is geotechnical information provided so that workers can safely perform construction at the field. It creates 3D data and supports viewing as a 3D image. Currently, all Korean companies that develop programs using 3D visualization use the MVS program developed by C Tech Development Corporation. However, the MVS program is a commercial program, and it is difficult to use MVS in 3D related programs developed by Korean Companies. In this paper, we propose to develop a program that can replace MVS to generate a 3D stratum model from clustered borehole information using Python's Gempy open-source. The 3D stratum model program can creates point data for each stratum and can creates a surface for each stratum through interpolation. Then, the 3D stratum model program is completed by merging the surfaces of each stratum. It was confirmed that there was no difference when a 3D model was created and compared with the MVS program and the proposed program from the borehole data of a Goyang area.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.445-454
• /
• 2022

Ice accretion on the aircraft components, such as wings, fuselage, and empennage, can occur when the aircraft encounters a cloud zone with high humidity and low temperature. The prevention of ice accretion is important because it causes a decrease in the aerodynamic performance and flight stability, thus leading to fatal safety problems. In this study, a shape design optimization of a multi-element airfoil is performed to minimize the amount of ice accretion on the high-lift device including leading-edge slat, main element, and trailing-edge flap. The design optimization framework proposed in this paper consists of four major parts: air flow, droplet impingement and ice accretion simulations and gradient-free optimization algorithm. Reynolds-averaged Navier-Stokes (RANS) simulation is used to predict the aerodynamic performance and flow field around the multi-element airfoil at the angle of attack 8°. Droplet impingement and ice accretion simulations are conducted using the multi-physics computational analysis tool. The objective function is to minimize the total mass of ice accretion and the design variables are the deflection angle, gap, and overhang of the flap and slat. Kriging surrogate model is used to construct the response surface, providing rapid approximations of time-consuming function evaluation, and genetic algorithm is employed to find the optimal solution. As a result of optimization, the total mass of ice accretion on the optimized multielement airfoil is reduced by about 8% compared to the baseline configuration.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.3
• /
• pp.125-132
• /
• 2000

pH, EC and TDS are basic components in the investigation of groundwater quality, and are very important to the preliminary assessment of groundwater quality. These three chemical components investigated at the Youngsan and Sumjin river basins in 1998 suggest that the groundwater quality is generally good in these basins. Linear regression analysis shows that TDS versus EC has an linear correlation, but EC versus pH, and TDS versus pH have nearly no correlation. The relation of TDS and EC is 1.0 mg/1=1.52 $mu\textrm{S}$/cm, and it is the quality of natural water. In geostatistical analysis. three kinds of data are stationary random functions and they have exponential variograms. According to the isopleth maps of the groundwater quality, the groundwater quality of the Youngsan river basin is more contaminated than that of the Sumjin river basin. The isopleth maps of TDS and EC show very similar patterns because of the strong correlation between TDS and EC. The minimum and maximum values of the groundwater quality data are not reflected on the isopleth maps because kriging produces smooth distributions with minimum estimation variances.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.143-154
• /
• 2012

As demand of water resources and attentions to changes in climate (e.g., due to ENSO) increase, long/short term prediction of precipitation is getting necessary in water planning. This research evaluated the ability of MM5 to predict precipitation in the Tampa Bay region over 23 year period from 1986 to 2008. Additionally MM5 results were statistically bias-corrected using observation data at 33 stations over the study area using CDF-mapping approach and evaluated comparing to raw results for each ENSO phase (i.e., El Ni$\tilde{n}$o and La Ni$\tilde{n}$a). The bias-corrected model results accurately reproduced the monthly mean point precipitation values. Areal average daily/monthly precipitation predictions estimated using block-kriging algorithm showed fairly high accuracy with mean error of daily precipitation, 0.8 mm and mean error of monthly precipitation, 7.1 mm. The results evaluated according to ENSO phase showed that the accuracy in model output varies with the seasons and ENSO phases. Reasons for low predictions skills and alternatives for simulation improvement are discussed. A comprehensive evaluation including sensitivity to physics schemes, boundary conditions reanalysis products and updating land use maps is suggested to enhance model performance. We believe that the outcome of this research guides to a better implementation of regional climate modeling tools in water management at regional/seasonal scale.