• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1676-1686
• /
• 2021

In this paper, we propose a general cross-chain solution based on the idea of modularity, abstraction, and layering, which decoupling the cross-chain function from the consensus algorithm and specific application logic, and utilize a Merkle proof to ensure the validity and legality of cross-chain operations. Since the underlying implementations of homogeneous and heterogeneous blockchains are different, we treat them separately. For homogeneous blockchains, we suggest a TCP-like cross-chain transport protocol (CCTP). While for heterogeneous blockchains, we present a method to construct the relay chain to realize the cross-chain function. The proposed scheme can enable the correct, effective, reliable, orderly, and timely transmission of cross-chain data. However, the essential difference between the operations within a single blockchain and the interoperability between different blockchains is that the trust domain is different. Cross-chain interoperation itself breaks the completeness of the blockchain, therefore, some efficiency and safety must sacrifice to trade-off.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.1-10
• /
• 2012

This paper presents an experimental result and suggests the confinement effect of headed cross tie in reinforced concrete(RC) columns subjected to cycling horizontal loads under constant axial load. Five RC columns specimens were manufactured, taking confined type of transverse reinforcement, whether or not using cross tie, end detail of cross tie (hooked or headed), and axial stress in column as major variables, Cyclic horizontal load applied to the columns under constant axial stress and the effect of cross tie to structural capacity of column was evaluated from the test. The column without cross tie failed showing bending deformation of hoop with crack in core concrete at low horizontal load while the column with cross tie showed quite improved strength and ductility by suppressing bending deformation of hoop as well as buckling of longitudinal bar at once even after crack in core concrete. At high lateral displacement, the column with hooked cross tie showed the failure pattern loosing the confining force of cross tie since the $90^{\circ}$ hooked part of cross tie was stretched out and the cracked core concrete lumps were came off. However, the column with headed cross tie showed very stable behavior since the head of cross tie effectively confined the hoop and longitudinal bars even at high lateral displacement.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.134-144
• /
• 2011

Crossmedia Storytelling is receiving attention as a new style of description in the age of limitless competition and infinite fusion among media. Crossmedia Storytelling specifies a form of storytelling carried out through mixed usage of plural media, such as televisions, movies, and web services. It is different from OSMU strategy in that plays one source of contents according to the characteristics of various media while Crossmedia Storytelling demands users' active participation. Moreover, it is also slightly different from Transmedia Storytelling in the point that narratives of each media are not complete themselves and only through effectively combining plural media can the whole story fully enjoyed. This research aims to analyze how users move among media in terms of Crossmedia contents by examining cases of Swedish interactive drama series , from Australia, and from the United States. To do so, first, the paper looks into the principles of Crossmedia communication and examines that it is based on online word-of-mouth communication, such as viral marketing. As a result, the following was found in the cases of Crossmedia Storytelling: negative stories that arouse users' emotional reactions & users' participation are effective, and the set-up of Sneezer, which causes the knowledge gap, is very important. It was also found that users' participation was actively taking place through online WOM communication in Crossmedia Storytelling.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.357-366
• /
• 2010

This paper presents experimental results about shear wall with various lateral reinforcement details in boundary elements. The research objective is to study the structural behavior of shear wall with boundary column confined by rectangular spiral hoops and headed cross ties developed to improve workability in the fabrication of boundary columns. These two details can be fabricated in a factory and put together on-site after being delivered so that the construction work may be reduced. Main parameters in the experimental study were the types of hoop and cross tie: rectangular spiral hoop and headed cross tie vs. standard hoop and cross tie with hook. Four half scaled shear wall specimens with babel shape were made and tested by applying horizontal cyclic load under constant axial force, 10% of nominal compressive strength of concrete. Based on the test result, it was shown that the shear wall with rectangular spiral hoop and headed cross tie in boundary columns has structural capacity compatible with conventional shear wall. The specimen SW-Hh which has bigger hoop bar and higher volumetric ratio of transverse reinforcements than other showed improved energy dissipating characteristic but it presented a rapid reduction of strength after peak point. The results indicates that, it is necessary to consider volumetric ratio of transverse reinforcements as well as hoop space in designing of shear wall with boundary columns for improved strength and ductility.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.67-75
• /
• 1998

Although the nCE(n-th order cross-entropy) error function resolves the incorrect saturation problem of conventional EBP(error back-propagation) algorithm, the performance of MLP's (multilayer perceptrons) trained using the nCE function depends heavily on the order of the nCE function. In this paper, we propose an adaptive learning rate to make the performance of MLP's insensitive to the order of the nCE error. Additionally, we propose a limited error signal of output node to prevent unstable learning due to the adaptive learning rate. The effectiveness of the proposed method is demonstrated in simulations of handwritten digit recognition and thyroid diagnosis tasks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1273-1281
• /
• 2014

Tissue engineering is an emerging research field that has the potential to restore, regenerate and repair damaged bone tissue and organs. Tricalcium phosphate and hydroxyapatite biomaterials-based calcium phosphate are excellent materials that have both osteoconduction and biocompatibility for bone tissue regeneration. In this study, solution structures were successfully fabricated using a fused deposition modeling system based on deposition and heating devices. The morphology characteristics of the bioceramic scaffolds sintered at a temperature of $1,300^{\circ}C$ were analyzed by scanning electron microscopy. The effects of various blended TCP/HA ratio on the microstructure and shrinkage were studied. The mechanical properties of the scaffolds were measured using a compression testing machine from stress-strain curves on the crosshead velocity of 1 mm/min. The fabricated scaffolds were evaluated by cell proliferation tests of MG-63 cells. The results of this study suggest that the blended TCP(75 wt%)/HA(25 wt%) scaffold is an appropriate scaffold for bone tissue regeneration.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.112-114
• /
• 2004

최근 인터넷과 전자기기 및 컴퓨터 시스템 기술의 발달에 맞물려 컴퓨터, 이동전화, 셋탑박스, 디지털 TV, 개인 휴대 단말기 등 정보단말기의 네트워크화가 급진전되면서 임베디드 리눅스가 IT분야의 새로운 관심사로 부상하고 있다. 리눅스는 오픈 소스로서 가격 경쟁력을 확보할 수 있으며, 공개된 장치 드라이버와 응용프로그램의 재사용이 가능하고, 오픈 소스 공동체를 통해 문제를 쉽게 해결할 수 있을 뿐 아니라 쉘, 파일 시스템을 이용하여 편리한 개발 환경을 제공해 주는 이점이 있다. 본 논문에서는 리눅스 운영체제를 디지털 TV에 이식하기 위해 크로스 컴파일 환경과 커널을 빅 엔디언(Endian)으로 변경하고, 커널 구동에 필수적인 장치들을 재설계함으로 리눅스 커널을 디지털 TV에 맞게 최적화함으로써 임베디드 리눅스 운영체제를 설계하였다. 또한 디지털 TV에서의 시스템 장치 제어를 위하여 I2C Bus Interface 디바이스 드라이버를 작성하였다.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2005.05a
• /
• pp.249-257
• /
• 2005

최근 내장형 시스템의 운영체제로 임베디드 리눅스가 점차 많이 사용되고 있다. 이에 따라 더욱 복잡한 내장형 소프트웨어를 빨리 개발하여 적시에 상품화하는데 필수적인 임베디드 리눅스용 원격 통합개발환경에 대한 요구가 증가하고 있다 그런데, Vxworks나 QNX와 같은 내장형 운영체제의 개발 환경에 비해서 임베디드 리눅스용 개발 환경은 편리성과 기능성이 미흡하다. 따라서 본 논문에서 임베디드 시스템 개발환경 EIDE(Embedded Integrated Development Environments)를 제시한다. EIDE는 크로스 툴체인, 디버거, 모니터등 다양한 도구들로 구성되며 모두 GUI에 기반한다. 또한 EIDE의 다양한 도구들이 타겟을 접근하는데 필요한 기능을 제공하는 타겟 에이전트를 제안한다. 타겟 에이전트는 호스트/타겟 환경이라 할지라도 개발자가 GUI로 된 EIDE의 통합개발환경 안에서 다양한 도구들을 이용하여 원격 개발에 필요한 모든 것을 편리하게 수행할 수 있도록 지원하면서 여러 도구의 요청을 동시에 처리할 수 있는 멀티쓰레드 구조의 타겟 에이전트를 제안하고, 타겟 에이전트가 EIDE에서의 원격 개발을 어떻게 더욱 편리하게 하는지 설명한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.23-27
• /
• 1991

각종 홀 (음악홀, 극장, 사무실건물)의 공조 덕트계에는 미로형소음챔버가 설 치되는 경우가 많다. 이러한 소음장치를 건물내부에 설치하는 경우에는 건물 설계단계에서부터 소음챔버로 인한 감음양(투과손실 : Transmission Loss)의 예측계산이 중요하다. 그렇지만, 일반적인 소음장치는 그 형상이나 내표면의 흡음조건이 아주 복잡하기 때문에, 현단계에서는 간단한 이론만으로 투과손 실예측이 거의 불가능하다. 지금까지 이 문제에 대해서 유한요소법(Finite Element Method : FEM)을 이용해 검토한 예가 종종 소개되었으나, 대부분 소음챔버의 입구와 출구에서의 임의의 점에 대한 음압비를 투과손실로서 구 하고 있다. 그러나, 소음기자체의 실질적인 투과손실특성을 알기 위해서는 소음기의 입력 파워에 대한 출력파워의 비로서 구하지 않으면 안된다. 따라 서, 본 연구에서는 유한요소법에 의한 복소음향인텐시티(Complex sound intensity)의 수치계산법을 각종소음기 (팽창형, 미로형)의 투과손실해석에 적 용하기 위하여 이론적인 면에서 고찰했으며, 프로그램도 개발하여 모델해석 에 적용하였다. 또한, 위에서 언급된 수치해석법의 타당성의 검증을 위하여, 측정에 의한 투과손실예측방법으로서 크로스스펙트럼(Cross Spectrum)법에 의한 음향인텐시티계측법의 이용에 대해서 이론적으로 고찰했으며, 그 이론 을 기초로 한 축척 모형실험을 병행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.656-659
• /
• 2009

직접메탄올형 연료전지(Direct Methanol Fuel Cell)는 휴대용으로 사용할 수 있는 소형 전원용으로 주로 개발되고 있으며, 다양한 용도로 사용이 가능하다. 하지만 직접메탄올연료전지에서 전해질로 많이 쓰이는 Nafion막은 이를 통한 메탄올 크로스오버(Crossover) 때문에 연료전지의 성능을 제한시키고 있다. 본 연구에서는 Nafion 117를 사용하여 전극 면적 100cm2 의 DFMC용 MEA를 제작하고, 공기 유량을 3ml/mim으로 고정하고, 메탄올 유량을 2,3 ml/min로 각각 공기극와 연료극에 공급하여 온도변화(50, 60, 70, $80^{\circ}C$)에 따른 성능을 확인하였다. DMFC의 적당 반응 온도는 $70^{\circ}C$로 생각되고, 유량은 메탄올 2ml/min, 공기 3ml/min유량 공급시가 성능이 높게 나오는 결과를 얻으나 일정시간 지나면 성능이 메탄올 3ml/min, 공기 3ml/min유량 공급시 보다 성능이 떨어지는 현상이 일어나기 때문에 $70^{\circ}C$ 반응온도에 메탄올 3ml/min, 공기 3ml/min의 유량 공급이 본 논문에서 최적화된 성능을 내는 조건으로 사료된다.