• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2537-2539
• /
• 2004

SOM은 심전도 신호의 진단에 있어서 효과적인 Clustering을 해주는 신경망이라는 것을 몇몇의 실험을 통하여 알 수 있었다. [1] 하지만 출력노드의 크기를 임의로 지정해야 하는 문제점이 있고 일반적으로 출력층의 크기가 클수록 진단결과는 좋지만 인간시간은 오래걸린다는 단점이 있다. 따라서 진단능력과 학습속도 사이의 균형에 관련된 문제가 대두되게 된다. 본 논문에서는 이러한 문제점을 극복하고자 기존의 SOM 신경망의 단점을 보완하고자 GCS(Growing Cell Structures)를 이용한 심전도의 학습속도와 분류능력 사이의 효율성 개선 방안을 제안한다. 이 방범은 GCS를 이용하여 적절한 노드의 수를 찾아내는 것이다. 이를 이용한 심전도 진단의 실험을 통해 기존의 SOM이 할 수 없었던 자체적인 출력노드의 증감을 행함을 확인할 수 있었다. 또한 출력노드의 감소로 인해 연산량이 줄어 학습시간의 효율성이 증가하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.355-362
• /
• 1987

본 실험의 목적은 치아 회분이 입자 크기에 따라 골형성에 어떠한 영향을 주며 순수 합성수산화 apatite인 calcitite와는 어떠한 차이가 있는가를 평가하기 위하여 수행하였다. 이를 위하여 200mesh와 40mesh의 치아 회분말과 40mesh calcitite를 잡종견의 신선한 발치와에 매식후 1주, 2주, 3주, 4주에 각각 희생하여 임상, X-선상 및 현미경적으로 관찰한 바 다음과 같은 결론을 얻었다. 1. 모든 경우에 조직의 거부반응이 없었다. 2. 40mesh치아 회분의 경우가 200mesh의 치아회분의 경우 보다 골 형성 능력이 현저히 높았다. 3. 40 mesh 치아회분과 calcitite 모두 비교군에 비하여 골 형성이 지연되었다. 4. 40 mesh 치아 회분과 calcitite의 골 형성 능력은 유사하였다.

• Korean Journal of Remote Sensing
• /
• v.25 no.4
• /
• pp.321-338
• /
• 2009

The objective of this paper is to compare spatial prediction capabilities of univariate kriging algorithms for generating GIS-based thematic maps from ground survey data with asymmetric distributions. Four univariate kriging algorithms including traditional ordinary kriging, three non-linear transform-based kriging algorithms such as log-normal kriging, multi-Gaussian kriging and indicator kriging are applied for spatial interpolation of geochemical As and Pb elements. Cross validation based on a leave-one-out approach is applied and then prediction errors are computed. The impact of the sampling density of the ground survey data on the prediction errors are also investigated. Through the case study, indicator kriging showed the smallest prediction errors and superior prediction capabilities of very low and very high values. Other non-linear transform based kriging algorithms yielded better prediction capabilities than traditional ordinary kriging. Log-normal kriging which has been widely applied, however, produced biased estimation results (overall, overestimation). It is expected that such quantitative comparison results would be effectively used for the selection of an optimal kriging algorithm for spatial interpolation of ground survey data with asymmetric distributions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.25-34
• /
• 2003

Recently, performance-based analysis/design methods such as the capacity spectrum method and the direct displacement-based design method were developed. In these methods, estimation of energy dissipation capacity of RC structures depends on empirical equations which are not sufficiently accurate, On the other hand, in a recent study, a simplified method for evaluating energy dissipation capacity was developed. In the present study, based on the evaluation method, a new seismic design method for flexure-dominated RC walls was developed. In determination of earthquake load, the proposed design method can address variations of energy dissipation capacity with design parameters such as dimensions and shapes of cross-sections, axial force, and reinforcement ratio and arrangement, The proposed design method was compared with the current performance-based design methods. The applicability of the proposed method was discussed.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.482-493
• /
• 2003

Flat plate structures subjected to lateral load have less deformability than conventional moment frames, due to the brittle failure of plate-column connection. In the present study, parametric study using nonlinear finite element analysis was performed to investigate the deformability of flat plates. The numerical results show that as number of continuous spans increases, the deformability of flat plates considerably decreases. Therefore, existing experiments using sub-assemblages with 1 or 2 spans may overestimate the deformability of flat plates, and current design provisions based on the experiments may not be accurate in estimating the deformability. A design method estimating the deformability was developed on the basis of numerical results, and verified by comparison with existing experiment. In the proposed method, the effects of primary design parameters such as direct shear force, punching shear capacity, aspect ratio of connection, number of spans, and initial stiffness of plate can be considered.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.367-379
• /
• 2002

In this paper, the method of constructing incomplete block designs for comparing general combining abilities of p inbred lines for partial diallel crosses is proposed. These partial diallel crosses block designs are constructed by using m-associate class partially balanced incomplete block designs with block size 2 and balanced incomplete block designs. Also, the efficiencies of block designs obtained through this method are tabulated for number of lines 24 or less.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.245-250
• /
• 1998

Attitude determination and control of satellite is important component which determines the accomplish satellite missions. In this study, attitude control using reaction wheels and momentum dumping of wheels are considered. Attitude control law is designed by Sliding control and LQR. Attitude maneuver control law is obtained by Shooting method. Wheels momentum dumping control law is designed by Bang-Bang control. Four reaction wheels are configurated for minimized the electric power consumption. Wheels control torque and magnetic moment of magnetic torquer are limited.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.401-402
• /
• 2010

This research initially suggest flexural toughness density as a key parameter describing energy absorption capacity of High Performance Fiber Reinforced Cementitious Composites [HPFRCC] regardless of the size of specimen. Two types of high strength steel fibers, Hooked and Twisted fiber, were used in two types of flexural specimen ($100{\times}100{\times}350mm^3$ and $150{\times}150{\times}500mm^3$) to estimate and validate the flexural toughness density.

• Korean journal of food and cookery science
• /
• v.5 no.2
• /
• pp.43-50
• /
• 1989

Physicochemical properties on defatted potato starches, Irish Cobbler and Dejima, were investigated. The average diameter of the Irish Cobbler and Dejima starch were $22.5-29.8\mu\textrm{m}$, and both the starches had birefringence. Irish Cobbler starch was lower than that of Dejima starch in water binding capacity, swelling power and solubility. Relative crystallinity of both the starches was decreased after defatted. The blue value of Irich Cobbvler and Dejima starch was measured 0.37 and 0.35 respectively Transmittnace of 0.1% starch suspensions was higher on defatted starch than on untreated starch. Differential Scanning Calorimetry of untreated potato starch showeed higher gelatinization temperature in Irish Cobbler starch than in Dejiam starch. The gelatinization enthalpy of untreated starch was higher in Irisch Cobbler starch than in Dejima starch, but, after defatted, it was decreased.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.11
• /
• pp.549-560
• /
• 2001

Cluster system provides attractive scalability in terms of compution power and memory size. With the advances in high speed computer network technology, cluster systems are becoming increasingly competitive compared to expensive MPPs (massively parallel processors). Load balancing is very important issue since an inappropriate scheduling of tasks cannot exploit the true potential of the system and can offset the gain from parallelization. In parallel processing program, it is difficult to predict the load of each task before running the program. Furthermore, tasks are interdependent each other in many ways. The dynamic load balancing algorithm, which evaluates each processor's load in runtime, partitions each task into the appropriate granularity and assigns them to processors in proportion to their performance in cluster systems. However, if the communication cost between processing nodes is expensive, it is not efficient for all nodes to attend load balancing process. In this paper, we restrict a processor that attend load balancing by the communication cost and the deviation of its load from the average. We simulate various models of the cluster system with parameters such as communication cost, node number, and range of workload value to compare existing load balancing methods with the proposed dynamic algorithms.