• Title/Summary/Keyword: 콘크리트 제조업

Search Result 6, Processing Time 0.02 seconds

레디믹스트콘크리트 현장배치플랜트 설치 및 관리에 관한 지침

  • 한국주택협회
    • 주택과사람들
    • /
    • no.47 s.64
    • /
    • pp.83-90
    • /
    • 1995
  • 건설기술관리법 제24조의 2 및 동법시행령 제47조의 3의 규정에 의한 품질시험 실시 대상 건설자재인 레디믹스트콘크리트에 대하여 당해건설공사의 품질을 철저하게 확보함과 동시에 적기공급을 도모하기 위해서 시공자가 현장배치플랜트를 설치하여 직접 생산${\cdot}$사용하는 경우 당해시공자 및 레디믹스트콘크리트 전문제조업자가 준수하여야 할 지침을 다음과 같이 고시합니다.

  • PDF

Environmental Maintenance Technology for Concrete Manufacturing Industry by Using an Automatic Fugitive Dust Reduction System (비산먼지 자동 저감시스템을 이용한 콘크리트 제조업 환경 유지관리 기술)

  • Hyun-Woo Cho;Yoon-Seok Chung;Deuk-Hyun Ryu;Yun-Yong Kim
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.27 no.4
    • /
    • pp.70-77
    • /
    • 2023
  • Fine dust is a cause of serious ecological problems, and fugitive dust generated from construction sites is a major source of fine dust in Korea. However, at construction sites, including concrete manufacturing industry sites, measurements are rarely made at the fugitive dust generation stage, and passive removal methods are the majority. Therefore, in this study, a fugitive dust measurement method suitable for managing fugitive dust generated during aggregate unloading in the concrete manufacturing industry sites was selected. In addition, the purpose was to analyze the amount of fugitive dust reduction according to the operation of the reduction system by applying the automatic fugitive dust reduction system to the aggregate unloading site. As a result, the reliability of the light scattering method was secured through the comparative measurement of the beta-ray absorption method and the light scattering method, and the light scattering method correction coefficient was calculated and applied to the measured value of the fugitive dust particle mass concentration at the concrete manufacturing industry sites. In addition, the fugitive dust reduction rate according to the operation of the automatic fugitive dust reduction system was derived.

A Study on Induced effect of Aggregate and Stone Sector with Input-Output Table (산업연관표를 이용한 골재 및 석재부문의 경제적 파급효과 분석연구)

  • Kim, Ji Whan
    • Economic and Environmental Geology
    • /
    • v.54 no.5
    • /
    • pp.573-580
    • /
    • 2021
  • This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

A Study on the Potential Risk Analysis for the Safety Management in the Formwork (거푸집공사 안전관리를 위한 잠재적 위험 분석에 관한 연구)

  • Shin, Yoon-Seok
    • Journal of the Korea Institute of Building Construction
    • /
    • v.21 no.2
    • /
    • pp.121-128
    • /
    • 2021
  • Due to the increase of size and complexity of construction project, the frequency of serious accidents in construction industry has been increased. Especially, the proportion of accidents in formwork of building construction site is very high, and many previous studies have been conducted to preventing them in the viewpoint of the diverse approaches. However, their effectiveness on accidents prevention was poor, and as a result, it is limited to consider the potential risks because many workers and managers tend not to be concerned with unsafe factors in formwork. Therefore, in this study, a realistic and proactive way for analyzing these potential risks was proposed in the manner of quantitatively assessing the potentials resulted from the unsafe factors in formwork. To verify the applicability of the proposed methodology, group survey was carried out, and the results were compared with those of the traditional importance-performance analysis(hereafter IPA) technique. Through the use of the proposed methodology, unsafe factors that were not found in the IPA but have potential risk were identified. Eventually, this study is expected to contribute to the proactive prevention of construction serious disaster accidents in formwork by enabling a more efficient management.

A Study on the Medical Insurance Utilization of Workers Suffering from Low Back Pain in an Area (일부지역 근로자의 요통으로 인한 의료보험 이용 조사)

  • Lee, Chul-Gab;Ahn, Hyun-Ok;Ryu, So-Yeon;Park, Jong;Kim, Ki-Soon;Kim, Yang-Ok
    • Journal of Preventive Medicine and Public Health
    • /
    • v.30 no.4 s.59
    • /
    • pp.764-778
    • /
    • 1997
  • To find the medical insurance utilization of workers when suffering from low back pain, an analysis was made toward the data of medical insurance benefits matched with the general characteristics of 10,183 workers, who were registered continuously from 1993 to 1995 at a medical insurance cooperation for industrial workers. The results were as follows; 1. The period prevalence of the medical insurance utilization for low back pain for 3 years from 1993 to 1995 was calculated as 17.1% for male workers and 19.4% for female workers. Most common cause of utilization was other dorsopathies including the herniation of lumbar discs. 2. The utilization rate increased significantly as the present age and the age joining the company got older(p<0.001). As the duration of employment got longer, the utilization rate of the male showed the tendency to increase and that of the female increased significantly(p<0.05). Among male workers employed at cement and concrete manufacturing companies showed higher utilization rate and among female laborers showed significantly higher utilization rate than clerical workers(p<0.01). 3. Annual utilization rate for low back pain didn't show any difference, but the portion of other dorsopathies among cause of utilization showed the tendency to increase from 1993 to 1995. 4. The mean number of claims for outpatient medical care for low back pain differed significantly by age, working duration, type of industries, income level(p<0.05), and the mean of total visiting days for care of low back pain differed significantly by working duration. In conclusion, considering the fact that the medical insurance utilization for low back pain increased annually and other dorsopathies including the herniation of dorsopathies were increasing, an effective preventive or management program for low back pain toward worker employed at industries were required.

  • PDF