• 건축구조
• /
• v.12 no.4
• /
• pp.82-83
• /
• 2005

현재까지의 아파트 재건축은 대부분의 기존에 낮은 용적율의 저층 아파트를 용적율을 높여 고층으로 건설하는 식으로 이루어졌다. 이때 증가하는 아파트 가구수는 일반에 분양함으로서 재건축 조합원인 원래의 아파트 주민과 시공사에게 경제성을 확보하여 주고, 따라서 그들간의 이해관계의 일치에 의해 재건축이 쉽게 이루어질 수 있었다. 그러나 콘크리트 건물의 수명이 짧다는 일본의 경우도 그 수명이 37년이며 일반적으로 외국의 경우 콘크리트 건물의 수명이 50-60년은 된다는 점을 볼 때 20년만 넘으면 재건축을 요구하는 우리나라의 아파트의 수명은 선진국에 비하여 지나치게 짧다. 재건축이 주민과 시공사의 이해관계에 의한 불가피한 상황이라면 재건축보다는 기존의 건물을 해체하진 않으면서 그들의 욕구를 충족시킬 수 있는 방안이 필요하다.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.23-29
• /
• 1995

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.7-20
• /
• 1996

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.335-342
• /
• 2014

In this paper, reference erosion criteria value suitable for progressive collapse analysis of RC structure due to blast load is proposed. Erosion is fundamentally a numerical technique to overcome the problems such as large numerical errors or abrupt termination of analysis and previous study has been suggested value for blast analysis. But concrete has different stress-strain curve according to strain rate. Consequently, the erosion criteria for the realistic progressive collapse simulation were suggested by comparing experiment results and numerical analysis results. Finally, the real progressive collapse of Oklahoma Federal Building was analyzed by using the median value of two values. And as a result, the analysis result is the actual collapse of the well described.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.54-58
• /
• 2002

대도시의 인구집중에 따라 토지의 고도이용을 위하여 건물의 고층화 및 복합화에 대한 요구가 점점 더 높아지고 있으며, 도심지에서의 삶의 질을 윤택하게 하기 위한 방법으로서 조망에 대한 욕구가 더 한층 중요시되고 있다. 이러한 이유로 인해 주거용 아파트에도 초고층 빌딩 개념이 도입되고, 상가 및 커뮤니티 시설 등이 추가되는 주상복합건물의 건설이 증가하는 추세에 있다.(중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.39-46
• /
• 2017

In this paper, a model updating procedure based on the response surface method combined with the multi-objective optimization was proposed and applied for updating of the FE models representing a low-rise reinforced concrete building before and after the seismic retrofit. The dynamic properties to be matched were obtained from vibration tests using a small shaker system. By varying the structural parameters according to the central composite design, analysis results from the initial FE model using a commercial software were collected and used to produce two regression functions each of which representing the errors in the natural frequencies and mode shapes. The two functions were used as the objective functions for multi-objective optimization. Final solution was determined by examining the Pareto solutions with one iteration. The parameters representing the stiffnesses of existing concrete, masonry, connection stiffness in expansion joint, new concrete, retrofitted members with steel section jacketing were selected and identified.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.469-470
• /
• 2009

Recently, so that HSC can secure the fire resistance properties at the time of a fire in super tall building suggested method of combined fiber. Thus, there is the purpose to develop the high fireproof concrete which applied method of combined fiber which can satisfy flowability and the fire resistance properties of HSC for construction of the super tall building.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.727-734
• /
• 2005

High-rise residential buildings these days tend to adopt a building frame system as primary earthquake resisting structural system for some architectural reasons. But there exist several ambiguities in designing such building frame systems according to current codes with regards to : the effective stiffness property of RC cracked section in static and dynamic analyses, analytical model to evaluate story drift ratio, and deformation compatibility requirements of frames. The comparative study for these issues by appling KBC 2005 to a typical building frame system shows that demands of member strength and story drift ratio can be different significantly depending on engineer's Interpretation and application of code requirements. And a building frame system can be noneconomical, compared with the dual system, because of higher demands on strength or ductility in both frames and shear walls.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.5
• /
• pp.61-69
• /
• 2007

The main purpose of this study is to provide a basic information for the seismic capacity evaluation and the seismic design of low-rise reinforced concrete (RC) shear wall buildings, which are comprised of a pilotis in the first story. In this study, relationships between strengths and ductilities of each story of RC buildings with pilotis are investigated based on the nonlinear seismic response analysis. The characteristics of low-rise RC buildings with pilotis are assumed as the double degree of freedom structural systems. In order to simulate these systems, the pilotis is idealized as a degrading trilinear hysteretic model that fails in flexure and the upper story of shear wall system is idealized as a origin-oriented hysteretic model that fails in shear, respectively. Stiffness properties of both models are varied in terms of story shear coefficients and structures are subjected to various ground motion components. By analyzing these systems, interaction curves of required strengths for various levels of ductility factors are finally derived for practical purposes. The result indicates that the required strength levels derived can be used as a basic information for seismic evaluation and design criteria of low-rise reinforced concrete shear wall buildings having pilotis structure.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.68-75
• /
• 1996