• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.261-273
• /
• 1998

Multiple well log analysis technique consisting of geophysical well log and geological core log has been made to analysis the discontinuities of a test borehole-PABH1 located in Pungam sedimentary basin, Sosok, Hongchon-gun, Kangwon Province. Well log methods consist of normal resistivity log, focussed log, single point resistance log, SP log, gamma log, natural gamma log as well as acoustic televiewer log and borehole television log. Core scanning technique was used as an aid for geological core log. The analysis was made by comparing firstly the televiewer and core discontinuities, and then the results from conventional geophysical log analysis were compared to those from core log and acoustic televiewer log. Fractures deduced from the acoustic televiewer log coincide well with discontinuities shown on the core and conventional geophysical logs. Particularly close coincidence could be observed between fractures derived from acoustic televiewer and conventional geophysical log analysis. It has been noted that the geophysical logs such as, caliper, resistivity, density and high resolution gamma gamma curves are effective in delineating the fractures. For example the ratio between density and resistivity (BRD/SHN) provides also an alternative indicator for discerning the fracture condition in the study area.

• Journal of the Korea Convergence Society
• /
• v.10 no.5
• /
• pp.165-171
• /
• 2019

Engineering and Technology have been influencing a lot in the field of sports. Competitiveness, attributes of sports, have forced not only sports players but sports goods to enhance those performance. Particularly in the field of motorsports, the convergence of sports and technology has long been done to satisfy between performance and safety. In this study, strength analysis was carried with FEM to develop CFRP Laminate(Carbon Fiber Reinforced Plastic Laminate) bucket seat targeted to motorsports and car tuning industries and FIA($F\acute{e}d\acute{e}ration$ Internationale de l'Automobile) regulation was applied to design the racing seat and evaluate its strength. FEM modeling considered the attributes of composites was followed by strength evaluation based on Tsai-Wu failure index were done according to Lay-up sequence and layer numbers. The result showed that the lay-up sequence with stacking angle such as $[0^{\circ}/30^{\circ}/60^{\circ}/90^{\circ}/-30^{\circ}/-60^{\circ}]_4$ with 3mm form core was optimal selection in the field of weight and strength evaluation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.307-312
• /
• 2005

As the various manufacturing technology of optical glass is developed, the aspherical lenses are applied to many fields. However, It is still very difficult to manufacture glass lens because of the high cost and the short life of core. In recent years, the demands of the aspherical glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. In the glass mold lens, it has merits of high productivity and reproductivity since lens is manufactured by the only forming with high precision mold. The fabricating conditions for glass mold lens are glass surface that does not cause fusion, viscosity of 108-1013 poise for the $0.2{\mu}m$ accuracy, and viscoelasticity for the roughness less than 100 angstrom. In this thesis, ultra-precision grinding characteristics of tungsten carbide for forming the aspherical glass lens core were studied and the result of it is applied to manufacture the tungsten carbide-base core of the glass lens used to the laser scanning unit and the camera phone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.620-622
• /
• 2022

When an optical fiber is exposed to radiation, a color center is formed in the core, which lowers the optical transmittance of the optical fiber. This is called the radiation-induced attenuation(RIA), and research on optical fibers having improved radiation resistance by changing materials and structures is being actively conducted. This is because radiation-resistant optical fibers have the advantage that they can be used in telecommunication and optical applications even in extreme environments such as space and nuclear power plants. In this paper, the effect of gamma irradiation of commercial radiation-resistant optical fibers was analyzed.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.43-48
• /
• 2015

We studied on the injection molding conditions of defect-free PMMA lens for surgical light. When the heat temperature of mold is low, more imperfect molding or weldlines and flow marks have showed. A defective lens depends on low fluidity of the PMMA resin and its temperature is high, a flexural strain has occurred. The longer cooling time of specimens, the more cracks have occurred due to resin crystallization. In this study, optimal molding conditions for defect-free PMMA lens is as follows. The heat temperature of core mold was 110 [$^{\circ}C$] and also the cooling time was 25 [sec]. PMMA materials can realized low expense to produce plastic optical lens and applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1619-1625
• /
• 2012

An electrical steel strip is commonly used as a core material in all types of electric transformers and motors. It is produced by a cold rolling process. In this paper, a damage-mechanics-based approach that predicts the edge fracture of an electrical steel strip during cold rolling is presented. We adopted the normal tensile stress criterion and the fracture energy method as a damage initiation criterion and a damage evolution scheme, respectively. We employed finite element analysis (FEA) to simulate crack initiation and propagation at the initial notch located at the edges of the strip. The material constants required in FEA were experimentally obtained by tensile tests using a standard and a notched sheet-type specimen. The results reveal that the edge crack was initiated at the entrance of the roll bite and that it rapidly evolved at the exit. The evolution length of the edge crack increased as the length of the initial notch as well as the front tension reel force of the strip increased.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.31-36
• /
• 2003

In this study, nano-sized NiCuZn-ferrites for the multi-layered chip inductor application were prepared by a coprecipitation method and its electromagnetic properties were analyzed. Also, the property of low temperature sintering were studied with the initial heat treatment of powder.$(Ni_{0.4-x}Cu_xZn_{0.60})_{1+w}(Fe_2O_4)_{1-w}$ (x=0.2, w=0.03) were calcined at $300^{circ}C~750^{circ}C.$ The sintered NiCuZn-ferrites at $900^{\circ}C$ showed good apparent density $4.90g/cm^3,$ and magnetic properties of initial permeability 164 and quality factor 72. As the calcination temperature increase, the grain size of NiCuZn-ferrite increased with irregular grain distribution and its magnetic properties were deteriorated.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.519-526
• /
• 2012

Human-human interaction network derived from Roman-fleuve, Togi was constructed. The network has a scale free properties as if most social networks do. The Togi is excellent model system for analyzing network dynamics because it has various characters and complex their interactions. The novel is composed of well-separated 5 sections. I constructed 5 different sub-netwotks from each section. As employing k-core algorithm as a useful tool for obtaining a core network from the complex networks, it is possible to obtain hidden and valuable information from a complex network. As gradually extending one section to another one, I constructed 4 different extended networks. The final one is whole network from the Togi. These results provide new insight that is analyzed by network-based approaches for network dynamics from literature, Togi.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.133-133
• /
• 2016

화학저항식(Chemiresistive) 가스센서의 저항변화를 향상시키기 위해서는 센서 소재의 비표면적을 향상시키는 방향 및 전자천이를 증가시키는 방향으로 연구가 진행되어야 하며, 그 중 센서의 비표면적을 향상시키는 예로써 중공 나노섬유가 있을 수 있다. 본 연구에서는 비표면적의 향상뿐만 아니라 중공 나노섬유의 전자천이를 증가시켜 센서의 검출 성능을 더욱 향상시키기 위한 목적으로 $TiO_2/ZnO$ 이중층 중공 나노섬유를 제안하었다. 제안된 $TiO_2/ZnO$ 이중층 중공 나노섬유는 템플레이트 합성법을 통해 제작되었으며, 그 공정은 다음과 같다; 전기방사(Electrospinning) 공정을 통해 폴리머 나노섬유를 제작한 후 $TiO_2$ 층과 ZnO 층을 ALD(Atomic Layer Deposition) 공정을 통해 차례대로 증착시킨다. 그 후 후열처리 공정을 통해 코어 폴리머를 제거함으로써 $TiO_2/ZnO$ 이중층 중공 나노섬유를 얻을 수 있다. 이 때, ZnO 층의 두께는 각각 달리하여 제작되었으며, 최종적으로 이들에 대한 가스 센싱 특성 및 메커니즘에 대한 체계적인 조사를 진행하였다. 단층 중공나노섬유는 셀 층의 두께가 Debye length와 유사할 때 셀 층 표면이 완전공핍층이 형성되고, 그 보다 크게 되면 부분적인 공핍층이 형성되게 되어 감응도가 감소하게 된다. 그러나 이중층 중공 나노섬유의 경우 셀 층의 두께가 Debye length 보다 더 크게 되더라도 TiO2와 ZnO의 헤테로접합으로 인해 ZnO에서 TiO2로 전자의 이동을 야기시키게 되어 환원성 가스에 대한 감응도가 단층 ZnO 중공 나노섬유에 비해 향상되게 된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.497-498
• /
• 2018

In the fire scene, it is difficult to see 1m ahead because of power failure, smoke and toxic gas, even with thermal imaging camera and Xenon searchlight. Analysis of the smoke particles in the fire scene shows that even if the smoke is $5{\mu}m$ or less in wavelength, it is difficult to obtain a front view when using a conventional thermal imaging camera if the visual distance exceeds 1 meter. In the case of black smoke with a particle wavelength of $5{\mu}m$ or more, a space permeation sensor technology using various sensors other than a single sensor is required because chemical materials, gas, and water molecules are mixed. Firefighters need a smoke detection technology for smoke detection and spatial information visualization for forward safety view.In this paper, we design the interface of the information processing system with 32bit CPU core and peripheral circuit. We also implemented and simulated the interface with Lidar sensor. Through this, we provide interface that can implement information processing system of human enhancement fire helmet in the future.