• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.114-121
• /
• 2014

The synthesis of Fischer-Tropsch oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. Our cobalt catalyst was prepared Co/alumina, Co/silica and Co/titania by the incipient wetness impregnation of the nitrates of cobalt with supports. Co-based catalysts was calcined at $400^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has carried out under $450^{\circ}C$, FT reaction of the catalyst has carried out at GHSV of 4,000 under $200^{\circ}C$ and 20atm. From test results, the order of increasing activity for the catalyst was Co/alumina > Co/silica > Co/titania. When the content of Co metal such as 5, 12, 20 and 30wt% was changed, an CO conversion increased as the content of Co metal increased. The activity of catalyst has obtained the best value at 12wt% Co content.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.279-287
• /
• 2009

Fisher-Tropsch synthesis for the production of hydrocarbon from syngas was investigated on 20% cobalt-based catalysts (20% Co/HSA, 20% Co/Si-MMS), which were prepared by home-made supports with high surface areas such as high surface alumina (HSA) and silica mesopores molecular sieve (Si-MMS). In the gas phase reaction by syngas only, 20% Co/Si-MMS catalyst was shown in higher CO conversion and lower carbon dioxide formation than 20% Co/HSA, whereas the olefin selectivity was higher in 20% Co/HSA than in 20% Co/Si-MMS. In the effect of n-hexane added in syngas, the selectivities of $C_{5+}$ and olefin were increased by comparing the supercritical phase reaction with the gas phase reaction in addition to reduce unexpected methane and carbon dioxide.

• 에너지공학
• /
• 제26권3호
• /
• pp.30-50
• /
• 2017

현재, 석탄이나 석유, 천연가스 등의 화석연료를 대량으로 소비하는 화력발전소나 각종 연료시설로부터 배출되는 배기가스에는 고농도의 $CO_2$가 포함되어 있으며, 지구온난화의 주된 원인으로 되어 있다. 종래, 이 대책법으로서 다방면으로부터 연구개발이 수행되고 있으며, 배기가스 중의 $CO_2$를 분리 회수하여 처분하는 것도 매우 유망한 방법의 하나라고 생각되고 있다. 이산화탄소의 화학적 이용이 적은 이유의 하나는, 이산화탄소가 탄소화합물 중에서도 산화되어 가장 안정한 상태로 존재하기 때문이다. $CO_2$ 배출의 관점에서 앞으로 $CO_2$를 화학적으로 유용한 화합물로 변환시키는 $CO_2$ 고정화 기술이 더욱 중요하다고 생각된다.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.32-39
• /
• 2007

CO oxidation and selective CO oxidation of $La_xCe_{1-x}Co_yCu_{1-y}O_{3-{\alpha}}$ perovskite(x=1, 0.9, 0.7. 0.5; y=1, 0.9, 0.7, 0.5) were investigated. For CO oxidation, catalytic activities were studied according to different preparation conditions such as pH and calcination temperature. The influence of the change of the $O_2$ concentration for selective CO oxidation was studied, too. The substitution of Ce for La improved the catalytic activity for CO oxidation and selective CO oxidation and best activity was observed for $La_{0.7}Ce_{0.3}CoO_3$ prepared at pH 11 and calcined at $600^{\circ}C$. The temperature of 90% CO conversion for CO oxidation using $La_{0.7}Ce_{0.3}CoO_3$ was $230^{\circ}C$. In contrast to the enhancement effect by Ce substitution, the partial substitution of Cu for Co in $LaCo_yCu_{1-y}O_{3-{\alpha}}$ decreased catalytic activities for CO oxidation reaction compared to that using $LaCoO_3$. For selective CO oxidation, the best CO conversion was 66% at $230^{\circ}C$ for $La_{0.7}Ce_{0.3}CoO_3$. The CO conversion of $La_{0.7}Ce_{0.3}CoO_3$ was greatly increased from 66% to 91% as increasing $O_2$ concentration from 1% to 2%.

• 콘크리트학회지
• /
• 제5권4호
• /
• pp.156-166
• /
• 1993

본 연구는 산업폐기물인 플라이애쉬를 충전재로 사용한 강섬유보강 폴리에스터 수지 복합체의 워커빌리티 및 그 역학적 특성을 구명하고, 그 제조방법을 실험적으로 검토한 것이다. 동복합체는 강섬유, 충전재(플라이애쉬, 중질탄산칼슘), 불포화 폴리에스터수지(스티타이렌 모노머), 경화촉진제(코발트옥테이트), 촉매(MEKPO) 및 굵은 골재와 잔골재를 사용하여 제조하였고, 배합조건별로 그 특성을 검토하였다. 연구결과, 플라이애쉬$\cdot$폴리에스터 수지복합체의 경우, 플라이애쉬-결합재비의 증가에 따라 압축, 인장, 휨강도 및 경화수축은 현저히 개선되었고 강섬유 보강 플라이애쉬$\cdot$폴리에스터 수지복합체의 경우 워커빌리티는 플라이해쉬-결합재비 및 강섬유혼입율 증가에 따라 저하하였으나, 압축, 휨강도 및 휨인성은 섬유혼입율 증가에 따라 현저히 증가되었다.

• 대한화학회지
• /
• 제35권1호
• /
• pp.90-95
• /
• 1991

할로벤질 할라이드의 선택적 카르보닐화에 대한 방법을 검토하였다. 알킬(알콕시메틸)벤조에이트는 한 반응기에서 두 반응에 의해 완성되며, 일차로 알코올 용매하에서 알콕시 음이온을 할로벤질 할라이드와 반응시키면, 알킬 할로벤질 에테르가 Williamson ether 합성법에 의해 얻어진다. 이차로 Na$_2$CO$_3$, CH$_3$I 및 Co$_2$(CO)$_8$을 첨가하고, 일산화탄소 기류하에서 반응시키면, 알릴할라이드 부분이 카르보닐화되어 알킬(알콕시메틸)벤조에이트를 높은 수득률로 얻을 수 있었다.

• 한국표면공학회지
• /
• 제55권3호
• /
• pp.180-186
• /
• 2022

The production of hydrogen via water electrolysis (i.e., green hydrogen) using renewable energy is key to the development of a sustainable society. However, most current electrocatalysts are based on expensive precious metals and require the use of highly purified water in the electrolyte. We demonstrated the preparation of a non-precious metal catalyst based on CuCo₂O₄ (CCO) via simple electrodeposition. Further, an optimization process for electrodeposition potential, solution concentration and electrodeposition method was develop for a catalyst-substrate integrated electrode, which indicated the highly electrocatalytic performance of the material in electrochemical tests and when applied to an anion exchange membrane water electrolyzer.