• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.139-149
• /
• 2007

Asynchronous OFCDM(Orthogonal Frequency and Code Division Multiplexing) systems must have a cell search process necessarily unlike synch개nous systems. this process is hewn initial synchronization and a three-step cell search algorithm is performed for the initial synchronization in the following three steps: OFCDM symbol timing, i.e., Fast Fourier Transform(FFT) window timing is estimated employing guard interval (GI) correlation in the first step, then the frame timing and CSSC(Cell Specific Scrambling Code) group is detected by taking the correlation of the CPICH(Common Pilot Channel) based on the property yielded by shifting the CSSC phase in the frequency domain. Finally, the CSSC phase within the group is identified in the third step. This paper proposes a modification group code with two or three block of the conventional CPICH based cell search algorithm in the second step which offers MS(Mobile Station) complexity reductions. however, the effect of the reduction complexity leads to degradation of the performance therefore, look for combination to have the most minimum degradation. the proposed block type group code with suitable combinations is the nearly sane performance as conventional group code and has a complexity reduction that is to be compared and verified through the computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.409-415
• /
• 2013

In this paper, we propose a correlation function using newly designed local signals for cosine-phased binary offset carrier (BOC) signal tracking. First, we divide a sub-carrier pulse over one pseudo random noise code period into multiple rectangular pulses, and subsequently, design novel local signals. Then, we obtain a correlation function with no side-peak based on a combination of correlations between the newly generated local signals and received cosine-phased BOC signal. From numerical results, it is confirmed that the proposed correlation function provides a tracking performance improvement over the conventional correlation functions in terms of the tracking error standard deviation.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.6
• /
• pp.1-10
• /
• 2011

This study presents the results of parametric studies of the P-M interaction diagram of hollow prestressed concrete bridge columns. Among the numerous parameters, this study concentrates on concrete compressive strength, prestressing steel reinforcement ratio, effective prestress, the Ds/Do ratio, and the Di/Do ratio. The strength and ductility of hollow prestressed concrete bridge columns were evaluated through quasistatic tests. The P-M interaction diagrams from the codes were different from that of the results, which were in good agreement with AASHTO-LRFD. Nondimensionalized P-M interaction diagrams were developed to predict the design resistance of hollow prestressed concrete bridge columns.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.892-902
• /
• 2011

The purpose of this study was to develop a muffin recipe that included germinated brown rice powder soaked in a mycelial culture broth of Phellinus linteus (GBRP). Muffins were made using various quantities of GBRP, butter, and milk. An assessment was conducted using the response surface methodology (RSM), which included 16 experimental points with three replicates for the three independent variables: GBRP, butter, and milk. The physical and chemical evaluation using the RSM showed no significant differences; whereas the hardness, cohesiveness, springiness, gumminess, and chewiness indicated significant differences in the relationships between the factors (p<0.05). The sensory evaluation using the RSM was highly effective in describing the relationships between overall acceptability and taste (p<0.001). Thus, the optimal combination of ingredients in a GBRP muffin, as assessed with numerical and graphical methods, was 84.041 g GBRP, 110.224 g butter, and 80.0 g milk.

• Convergence Security Journal
• /
• v.20 no.3
• /
• pp.53-60
• /
• 2020

At the present stage of the fourth industrial revolution, machine learning and artificial intelligence technologies are rapidly developing, and there is a movement to apply machine learning technology in the security field. Malicious code, including new and transformed, generates an average of 390,000 a day worldwide. Statistics show that security companies ignore or miss 31 percent of alarms. As many malicious codes are generated, it is becoming difficult for humans to detect all malicious codes. As a result, research on the detection of malware and network intrusion events through machine learning is being actively conducted in academia and industry. In international conferences and journals, research on security data analysis using deep learning, a field of machine learning, is presented. have. However, these papers focus on detection accuracy and modify several parameters to improve detection accuracy but do not consider the ratio of dataset. Therefore, this paper aims to reduce the cost and resources of many machine learning research by finding the ratio of dataset that can derive the highest detection accuracy in CNN Mobile net-based malware detection model.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.1-8
• /
• 2011

This paper presents a method for improving the performance of ISF coefficients quantizer through compensating the defect of the split structure vector quantization using the ordering property of ISF coefficients. And design the ISF coefficients quantizer for wideband speech codec using proposed method. The wideband speech codec uses split structure vector quantizer which could not use the correlation between ISF coefficients fully to reduce complexity and the size of codebook. The proposed algorithm uses the ordering property of ISF coefficients to overcome the defect. Using the ordering property, the codebook redundancy could be figured out. The codebook redundancy is replaced by the adaptive-extended codebook to improve the performance of the quantizer through using the ordering property, ISF coefficient prediction and interpolation of existing codebook. As a result, the proposed algorithm shows that the adaptive-extended codebook algorithm could get about 2 bit gains in comparison with the existing split structure ISF quantizer of AMR-WB (G.722.2) in the points of spectral distortion.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.61-67
• /
• 2012

Spreading sequence is used for spreading spectrum in CDMA. For the purpose of minimizing multiple access interference and expanding linear span of the sequences, it is desirable to use such sequences with low correlation and high linear span. To obtain large family size and high linear span, the values of the correlation function of the sequences is more complex. In this paper, we propose the extended Zeng sequences with large family size and high linear span and analyze the correlation of the sequences.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.66-74
• /
• 2001

In this paper, we proposed the new structure of the Rake Finger using Walsh Switch, the shared accumulator, and the pipeline FWHT(Fast Walsh Hadamard Transform) algorithm for reducing the signal processing complexity resulting from the increase of the number of data correlators. The function simulation of the proposed architecture is performed by Synopsys tool and the timing simulation is performed by Compass tool. The number of computational operation in the proposed data correlators is 160 additions and the conventional ones is 512 additions when the number of walsh code channels is 4. As a result, it is reduced about 3.2 times other than the number of computational operation of the conventional ones. Also, the result shows that the data processing time of the proposed Rake Finger architecture is 90,496[ns] and the conventional ones is 110,696[ns]. It is 18.3% faster than the data processing time of the conventional Rake Finger architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.31-36
• /
• 2004

In this paper, we proposed the new structure of the Rake Finger using Walsh Switch, the shared accumulator, and the pipeline-FWHT algorithm for reducing the signal processing complexity resulting from the increase of the number of data correlator. The function simulation of the proposed architecture is performed by Synopsys tool and the timing simulation is performed by Compass tool. The number of computational operation in the proposed data correlators is 160 additions and the conventional ones is 512 additions when the number of walsh code N=4. As a result, it is reduced about 3.2 times other than the number of computational operation of the conventional ones. Also, the result shows that the data processing time of the proposed Rake Finger architecture is 90,496[ns] and the conventional ones is 110,696[ns]. It is $18.3\%$ faster than the data processing time of the conventional Rake Finger architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.712-722
• /
• 2002

We have investigated a novel optical decoder for a fiber-optic code division multiple access(CDMA) communication systems. The conventional optical encoder and decoder have the advantage of simple structure. However the number of users in the system is limited by the auto- and cross-correlation properties generated in decoding process. In previous studies, to improve the system performance, although they used an optical code that minimize the sidelobe and cross-correlation, could not yet find a novel methods for performance improvement in fiber-optic CDMA system. Thus, it is necessary to investigate the novel optical decode in order to improve the performance of system. In this paper, we schematize the AND gate logic element(AGLE) composed with 1$\times$2 or 1$\times$3 coupler and the optical thyristor and propose the novel optical decoder using K(weight) AGLE. The optical thyristor only passes the overlapped signal and clips other signals. Such a novel concept means that the optical thyristor can operate as a hard-limiter. We analyze the fiber-optic CDMA system using the novel optical decoder with simulation and is found that the novel optical decoder using the AGLE and optical thyristor excludes the sidelobe and cross-correlation intensity between any two sequences.