• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.152-155
• /
• 2014

This paper describes a design of digital PWM controller for automotive brake solenoid valve which is used in ABS/ESC SoC. The PWM controller which consists of 12 channels supports both direct control and PI control. Six channels in direct control mode make consistent PWM signals according to duty ratio setting, and the others in PI control mode make PWM signals with constant current depending on current setting. The PWM controller also has functions including solenoid valve open detection, Dither and PWM phase shift. The PWM controller having 44,779 gates is fabricated using a 0.18um CMOS process, and test results show that all the functions are correct.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.405-412
• /
• 2023

With the development of drone and ICT convergence technology, the use of underwater drones such as leisure underwater drones such as underwater exploration for fishing and industrial drones such as bridge piers is increasing. Existing motor controllers are suitable for aerial drones and these can increase the completeness of underwater drones and their reliability in motor control by developing BLDC motor controllers dedicated to underwater drones. By developing a battery management system (BMS) exclusively for underwater drones, battery stability was ensured by checking the state of charge, checking the state of discharge, adjusting cell balancing, and implementing high/voltage protection functions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.521-523
• /
• 2021

Data augmentation are techniques used to increase the amount of data by using small amount of existing data. With the spread of the Internet, we can easily obtain data. However, there are still certain industries, like medicine, where it is difficult to obtain data. The same is true for image data in which a black screen is displayed on video wall controller. Because it is rare that a black screen is displayed during operation, it is not easy to obtain an image with a black screen. We propose a DCGAN based architecture that generate dataset using a small amount of black screen image.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.573-574
• /
• 2009

열차 통신의 목적은 분산 제어 시스템에서 빠르고 정확한 데이터 교환에 있다. 이를 위하여 개발되고 1999년 IEC와 IEEE에 의해 국제 규격으로 승인된 TCN(Train Communication Network)은 차량간 통신 버스인 WTB(Wired Train Bus)와 차량내 통신 버스인 MVB(Multifunction Vehicle Bus)의 이중 계층 구조로 구성되며 TCN의 데이터 서비스는 프로세스 데이터, 메시지 데이터, 관리용 데이터의 세가지 데이터 서비스로 구분된다. MVB는 전송 가능한 데이터 서비스에 따라 디바이스의 클래스가 나눠지게 된다. 본 논문에서는 MVB에서 버스 마스터의 프레임에 따라 데이터를 보낼 수 있는 슬레이브 컨트롤러의 구성과 시뮬레이션을 통해 구현된 장치의 기능이 국제 표준의 제안사항들을 따르고 있는 지 증명한다.

• IT SoC Magazine
• /
• s.16
• /
• pp.42-49
• /
• 2006

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.97-100
• /
• 2009

홈네트워크 환경에서 정보가전기기를 제어하는데 PLC(전력선통신)나 IR컬트롤러가 사용된다. PLC의 경우 가전기기동작이 명확하지만 IR컨트롤러 같은 경우에는 방향이나 여러 조건에 따라 가전기기동작이 불분명하여 사용자의 명령대로 수행되지 못하는 경우가 발생한다. 본 논문에서는 이러한 상황을 해결하기 위해 가전기가의 상태를 모니터링하여 사용자에게 알려주는 방법을 제안하였다. 동작 상태와 대기 상태의 전류량이 다른점을 이용하여 동작 여부를 판별한다. 제안된 방법을 사용하면 IR 컨트롤러로 동작하는 가전기기의 상태 신뢰성 을 높일 수 있다.

• Journal of Software Assessment and Valuation
• /
• v.17 no.1
• /
• pp.93-99
• /
• 2021

The demand for online education has rapidly increased due to the influence of COVID-19. One of the biggest challenges in engineering education is how to efficiently conduct experiments online. In this paper, for the virtual experimental system for microcontroller application that is essential for education in the field of electrical, electronic, and control engineering, we described the microcontroller functional modeling and implementation with Java language. The usefulness of the developed microcontroller module has been verified through educational field application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.739-742
• /
• 2010

The demand of MOST interface module is increasing with car-multimedia network system. MOST devices consist of INIC part which controls MOST network and EHC part which is used by user. The efficient data communication between EHC and INIC demands implementation of a proper device driver. This paper presents a design method for I2C communication driver which is used for transmitting control messages between nodes of MOST network. For effetive I2C communication, we design driver with NetService API. For testing the experiment, we use the MOST audio interface deivce for porting driver sources and will develop various driver on MOST device based OS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.113-119
• /
• 2020

Large sensor networks require the collection and analysis of data from a large number of sensors. The number of sensors that can be controlled per micro controller is limited. In this paper, we propose how to aggregate sensor data from a large number of sensors using a large number of microcontrollers and multiple bridge nodes, and design and implement an efficient communication system for sensor data collection. Bridge nodes aggregate data from multiple microcontrollers using SPI communication, and transfer the aggregated data to PC servers using wireless TCP/IP communication. In this paper, the communication system was constructed using the Open H/W Aduo Mini and ESP8266 and performance of the system was analyzed. The performance analysis results showed that more than 30 sensing data can be collected per second from more than 700 sensors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.501-502
• /
• 2018

Traditional miniature micro-controllers focus on communication only because of memory capacity is low due to small size. Due to this, it is difficult to mount the UI for user convenience in the control system and a lot of functions cannot be added. To solve this problem, this paper proposes a weight reduction and encoding method for the control system. In addition, it is increased user convenience by overcoming the problem of difficulty in Korean system in the existing system. Also, we can add various functions to the memory space secured by system weight reduction.