• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.447-455
• /
• 2005

Intra-block remarshalling is the task of rearranging into some target bays those containers which are scattered within around the block. If multiple transfer cranes installed in the block are all used together we may be able to complete the remarshalling task as early as possible. However, when multiple cranes are used simultaneously, there may occur significant delays if we do not carefully consider interferences between the cranes at the time of scheduling. Especially, delays caused by interferences occur more frequently in case of using non-crossing cranes. This paper presents an efficient heuristic method for assigning moves of containers to each crane and for determining an appropriate container moving order in a manner sensitive to the interferences. Simulation experiments have shown that the proposed method can effectively reduce delays in various environments.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.747-753
• /
• 2005

In this paper, as an anti-sway control strategy of container cranes, we investigate a variable structure control in which the moving load follows a given trajectory, whereas both the trolley and hoist controllers achieve their positioning problems. It is crucial, in an automated container terminal, that collisions should be avoided during the transference of containers from one place to another. It is also necessary, in the case of a quay crane, to select suitable loading and unloading trajectories of containers, so that possible collisions with surrounding obstacles are avoided. After a brief introduction of the mathematical model, a robust control scheme (i.e., a second-order sliding mode control that guarantees a fast and precise transference and a suppression of the resulted swing) is presented. Despite model uncertainties and unmodeled actuators dynamics, the swing suppression from the given trajectory is obtained by constraining the system motion on suitable sliding surfaces, which include both the desired path and the swing angle. The proposed controller has been tested with a laboratory-size pilot crane. Experimental results are provided.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.215-219
• /
• 2008

Recently, a container shipping volume has increased dramatically and continued on a trend of rapid growth, and so the number of container handled at the port increase. therefore, it's increasing about concern of harbor automatism to save distribution costs in harbor. harbor automatism classifies into four large automatism's, gate automatism by using RFID that trailer come with burdening the container to be loaded on ships go though with RFID and Quay-Side container crane automatism that treats cargos loading on ships and automatism of CG that loads containers from yard, and automatism of container transporters that carries containers in between gates. To increase the using efficiency of harbor, detecting exact location of yard crane is very important matter. In this paper, propose about yard crane automatism applied UWB Location system and the development direction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.907-910
• /
• 2007

Recently, a container shipping volume has increased dramatically and continued on a trend of rapid growth, and so the number of container handled at the port increase. therefore, it's increasing about concern of harbor automatism to save distribution costs in harbor. harbor automatism classifies into four large automatism's, gate automatism by using RFID that trailer come with burdening the container to be loaded on ships go though with RFID and Quay-Side container crane automatism that treats cargos loading on ships and automatism of CG that loads containers from yard, and automatism of container transporters that carries containers in between gates. To increase the using efficiency of harbor, detecting exact location of yard crane is very important matter. In this paper, it intends to discuss about yard crane automatism applied UWB Ranging system and bring up the development direction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.297-302
• /
• 2004

This paper analyzed productivity of quay cranes on container terminal that have perpendicular yard layout block. In most existing container terminals, quay cranes of single trolley type are used to loading and unloading containers, but quay crane productivity of these type has many limitation about large size containership. For these reasons, recently quay cranes of various type that mn improve productivity are developed and as the representative example, dual trolley, double trolley, supertainer are developing. These cranes are realized that very high productivity bemuse their cycle time is short more than existent single trolley quay crane. Therefore, we analyzed productivity of these cranes that are realized by next generation crane alternatives and as result qf this research, mechaniml productivity by cycle time and net productivity by simulation were measured.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.149-154
• /
• 2017

Recently, container terminal operators have made efforts to develop an efficient remarshalling plan in response to the increase in automation of equipment handling and transport of containers in the terminals. Usually, containers are handled by multiple AYCs(automated yard cranes) in-yard in an automated container terminal, and terminal operators establish a remarshalling plan using slack time to increase the efficiency of ship operation. This study develops the optimal mathematical model through mixed integer programming as a solution to the problem of dispatching multiple AYCs. Considering the difficulty of direct application to the field due to computation time, we analyze the five prototypical dispatching rules for real world adaptation. A numerical experiment found that the maximum weight ratio (MR) rule and the maximum weight (MW) rule are the ideal dispatching solutions to the multiple AYCs dispatching problem.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.387-394
• /
• 2012

In an automated container terminal, automated stacking cranes(ASCs) take charge of handling of containers in a block of the stacking yard. This paper proposes a multi-criteria strategy to solve the problem of job dispatching of twin ASCs which are identical to each another in size and specification. To consider terminal situation from different angles, the proposed method evaluates candidate jobs through various factors and it dispatches the best score job to a crane by doing a weighted sum of the evaluated values. In this paper, we derive the criteria for job dispatching strategy, and we propose a genetic algorithm to optimize weights for aggregating evaluated results. Experimental results are shown that it is suitable for real time terminal with lower computational cost and the strategy using various criteria improves the efficiency of the container terminal.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.851-856
• /
• 2008

Construction of large-scale container ports with the productivity improvements in container cranes shortened time of staying port to increase the level of service it harbors efforts accelerated. About container crane system exerted on the input, which is designed to look good performance considering the states feedback control system. The states observer designed of container cranes state variables that are expected to measurement noise or particular measurement signal. In the status of existing research, the feedback gain matrix and the state observer gain matrix are searched by being separated solving. But the feedback gain matrix and the state observer gain matrix are searched by RCGAs at once that be used robust search method in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.339-344
• /
• 2006

Container terminals compete with other ones because of the continuous increase of container flows and the appearance of large-sized vessels. Major port equipment manufacturers are interested in the development of new conceptual equipment ot greatly increase the productivity. In this study, a two-phase procedure is suggested for selecting the optimal development alternatives, when there are various development alternatives for container cranes, typical equipment in ports. The first phase removes the alternatives that violate essential requirements and the second phase selects find alternatives by using AHP (Analytic Hierarchy Process). Finally and example applying the procedure is provided.