• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.39-43
• /
• 2011

Effects of cavity material on the Q-factor measurement of microwave dielectric materials were studied by HFSS simulation and the measurements using metal cavity. $TE_{01\delta}$ mode resonant frequency was determined from the electric and magnetic field patterns and the loaded Q-factor was calculated from 3dB bandwidth of $S_{21}$ spectrum. When the cavity metal materials were Cu, SUS and Au cavity, the level of Q-factor was similar. However, Q-factor was significantly decreased when the cavity metal material was CuO. The Q-factor measurements of dielectric resonator by network analyzer using various metal cavity exhibits consistent behavior.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.9-13
• /
• 1979

Multimode characteristics of a dielectrically loaded rectangular cavity are analyzed by a graphical method. Coupled transcendental equations for multimode frequencies may be solved graphlially. This shows that the resonant frequencies of the partially flued cavity with a dielectic are shifted toward lower frequencies compared to those of the empty cavity. It is shown that a perturbational scheme can not be employed to calculate multimode frequencies because of relatively large frequency shrift. Existence of the surface wave modes In the dielectric and their resonant frequencies are early predicted from this graphical method.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2210-2212
• /
• 2000

전자레인지는 전자파를 발생시키는 마그네트론과 도파관 캐비티로 이루어진다. 캐비티는 전자파의 측면으로 볼 때 일종의 공진기로 작용한다. 그러므로 전자파가 강한 곳과 약한곳이 나타나게 된다. 이런 배경에서 전자레인지의 주요 설계 기술 중의 하나는 캐비티내와 전자파의 분포를 균일하게 만드는 기술이다. 그러나 전자레인지는 제품의 특성상 여러 가지 다양한 부하가 캐비티의 내부에 분포하게 되기 때문에 부하에 따른 캐비티 내부의 전자파 분포를 균일하게 하는 것은 매우 중요한 기술로 된다. 따라서 본 논문에서는 이러한 여러 가지 조건에서 캐비티내의 전자파의 분포를 분석 할 수 있는 측정 방법과 설계 인자를 추출할 수 있는 방법을 제안하였다. 또한 전자파의 분포를 측정한 결과의 정확성을 고찰하기 위하여 캐비티내의 mode 해석을 이용한 modeling을 제안하였으며 측정과 비교 검토를 수행하였다. 그 결과 캐비티내의 전자파의 분포를 전송선 이론을 이용한 분석에 의해 설계 가능하고 또한 보정 가능함을 보였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1094-1102
• /
• 2010

In this paper, the problem of electromagnetic transmission via slits in a cavity inside conducting screen of finite thickness is considered for the case that the TE(to the slit axis) polarized plane wave is incident on the slit in conducting screen. Using the method of moments the variations of the transmitted power through the slits are obtained and compared with those computed from an equivalent circuit constructed using an equivalent slit admittance. It is found that the effective slit width of a narrow slit, at resonance, becomes $1/{\pi}$ wavelengths independently of the actual slit width. The transmission resonance phenomena in the proposed geometry are explained in connection with the variations of an equivalent admittance of the slit in the cavity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.20-25
• /
• 1982

A realization method of the microwave oscillator is proposed by the inherently stable transistor with a cavily resonator feedback loop. The real Part of the output impedance of the inherently stable bipolar transistor can be made to be negative at the resonance frequency by the high-Q cavity feedback loop, and the oscillation condition can be obtained with the matching section of the load. In this work the microwave transistor oscillator is realized with a silicon bipolar transistor HXTR 2101 and a reentrani cavity, and characteristic of the output power 10m Watts at 2.33 GHz osc. frequency can be verified experimentally.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1032-1039
• /
• 2022

In this paper, we designed and implemented a cavity bandpass filter combined with a cross-coupling equalizer structure to enhance Group delay for 5G mobile network repeater, which can replace the SAW (Surface Acoustic Wave) type bandwidth filter used in the existing mobile communication system. Using the 3D EM simulation tool (HFSS), the resonance frequency, the coupling coefficient between resonators, and external quality coefficient between resonators were calculated. Based on this, a 12th bandpass filter was constructed to have attenuation characteristics of more than 20dB at the edge end of both sides of the band with a metal cavity structure with a frequency band of 3500MHz to 3600MHz and bandwidth of 97.85MHz. The designed bandpass filter satisfies the group delay time requirement for the 5G mobile communication standard and the in-band and out-band frequency responses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.872-878
• /
• 2014

This paper proposes a measurement method of the complex relative permittivity of semi-solid materials using a new cavity structure. Semi-solid materials are positioned in the proposed cavity where an aperture exists on each corner of the upper part and a ground plane is separated. In order to show the validation of the proposed method, we measured the complex relative permittivity of distilled water and 0.9 % saline by sensing a shift of resonant frequency and using Critical-Points Method, and compared the results with those derived from the Cole-Cole equation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.378-385
• /
• 1998

A three-dimensional finite difference time domain (3-D FDTD) algorithm of calculation for the characteristics of coaxial-to-cavity filter including a discended probe and a tuning post is presented. In the arrangement the inner coaxial conductor protrudes into the cavity and operates as a probe radiator. And the height of the rectangular tuning post determines the resonant frequency. The validation of this method is confirmed by comparing the calculated values with experimental results for the designed filter.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.188-189
• /
• 2003

어떤 특정한 주파수 범위 내에서 전자기파의 진행을 차단하는 광자 크리스탈은 광 집적회로에서 빛의 진행을 제어할 수 있는 잠재적인 능력을 가지고 있다. 따라서 최근 몇 년 동안 광자 크리스탈의 특성을 이용한 광 스위치, 광 집적회로, 광섬유, 광 분배기, 공진 캐비티, 도파로 등에 대한 연구가 활발히 이루어지고 있다. 본 논문에서는 광자 크리스탈의 두개의 선 디펙트로 구성된 도파로 사이의 공진 터널링 현상인 채널 드롭 구조를 이용하여, 새로운 1$\times$4 Demultiplexer의 구조를 제안하고 그 구현 가능성을 고찰하였다. (중략)

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2012

The resonance properties of circular vertical-cavity surface-emitting lasers (VCSELs) are studied by using a newly developed equivalent network approach. Optical parameters, such as the stop-band or the reflectivity of periodic Bragg mirrors and the resonance wavelength, are explored for the design of these structures. To evaluate the differential quantum efficiency and the threshold current density, a transverse resonance condition of circular modal transmission-line theory is also utilized. This approach dramatically reduces the computational time as well as gives an explicit insight to explore the optical characteristics of circular VCSELs.