• 대한원격탐사학회지
• /
• 제6권2호
• /
• pp.135-151
• /
• 1990

Solid and hazardous waste disposal site selection by using GIS(Geographic Information System) is the purpose of this study. The criteria of site selection are usually defined in accordance with geological, cultural and social characteristics. Unadequate adaptation of these criteria in a site selection may cause serious problem of water and soil pollution. The environmental information for extraction of these criteria consist of a lot of data : geology, geomorphology, hydrogeology, engineering geology, cultural and social information.... GIS could be easily applied to construct of this environmental information data base, and carry out cartography simulation using overlay mapping technique(polygon overlay). ARC/INFO(GIS system) was used for these studies, and AML(ARC/INFO Macro Language) in this system provided more variable and effective methods for cartography simulation. TM(Thematic Mapper) images were used for the evaluation of land cover/use in the studied area, by using ERDAS image processing system.

• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.88-96
• /
• 2017

목적: 치과 임플란트 캐드 소프트웨어를 이용하여 맞춤형 지대주 디자인 시에 소요되는 시간과 반복학습의 관계를 평가하는 것이다. 연구 재료 및 방법: 맞춤형 지대주 디자인은 3DS 캐드 소프트웨어와 EXO 캐드 소프트웨어를 사용하여 지정된 4개의 단계 순으로 시행되었고, 단계별로 3회 반복 측정하였다. 반복학습에 의한 학습효과는 학습곡선으로 나타냈고, 반복학습에 따른 디자인 시에 소요되는 총 시간과 단계별 소요되는 시간의 감소가 유의한지는 Friedman 검정과 사후검증(Wilcoxon signed rank test)으로 평가하였다. 디자인 시간과 군간의 차이는 반복 측정 이 요인 분석으로 평가하였다. 통계 분석은 SPSS 통계 소프트웨어를 사용하여 수행하였다(P < 0.05). 결과: 맞춤형 지대주 디자인의 반복학습은 횟수와 단계에 따라 유의한 차이를 나타냈다(P < 0.001). 디자인 시간에 따른 차이는 유의한 것으로 나타났으며(P < 0.001), 캐드 소프트웨어 간의 차이도 유의한 것으로 나타났다(P = 0.006). 결론: 캐드 소프트웨어의 반복학습은 디자인 시간을 단축하였고 디자인 평균시간은 3DS 캐드가 EXO 캐드에 비하여 더 적게 소요되었으나, 학습효과에 따른 학습률은 EXO 캐드가 3DS 캐드보다 좋은 결과를 보였다.

• 구강회복응용과학지
• /
• 제35권1호
• /
• pp.11-19
• /
• 2019

목적: 치과 임플란트 캐드 소프트웨어를 사용해 본 경험자와 무경험자에 의한 두 종류 캐드 소프트웨어의 사용자 편의성 및 만족도를 평가하는 것이다. 연구 재료 및 방법: 치과 임플란트 캐드 소프트웨어에 경험이 있는 20명의 치기공사와 캐드 소프트웨어를 사용해보지 않은 12명의 경북대학교 치과대학 학생에게 두 종류의 캐드 소프트웨어(ExoCad, Deltanine)를 이용하여 임플란트 맞춤 지대주(implant custom abutment)를 디자인하도록 하였다. 그리고 구조화된 설문지(1단계: 기본 정보 및 파일 불러오기, 2단계: 지대주 디자인 전 조건 설정, 3단계: 지대주 디자인 설정, 4단계: 전체적인 만족도)를 작성하도록 하였다. 수집된 자료의 통계분석은 Mann-Whitney U test를 사용하였다(${\alpha}=.05$). 결과: 4단계로 나누어 진 21개 문항에 대해 평가된 치과 임플란트 캐드 소프트웨어의 디자인 편의성과 만족도는 1단계의 두 문항에서 모두 Exocad 소프트웨어에서 유의하게 높았습니다. 2단계 및 3단계의 경우 경험이 있는 참가자는 Deltanine 소프트웨어가 훨씬 뛰어나다고 평가했습니다. 4단계에서는 두 문항 모두 Exocad 소프트웨어에서 높은 평가를 받았습니다. 결론: 2 종류 치과 임플란트 캐드 소프트웨어의 편의성 및 만족도 조사에서 Exocad 소프트웨어가 전체적으로 높은 평가를 받았다. 하지만 디자인 과정 중 핵심인 2, 3단계에서 유경험자는 Deltanine 소프트웨어를 높게 평가하였다. 따라서 그외 부분을 보강하면 Deltanine 소프트웨어는 임상에서 널리 사용될 수 있을 것이다.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.46-52
• /
• 2004

The most of reducers consist of many gear parts, but a ball reducer never contains a gear. As the ball reducer with gearless has no back lash, it is necessary more and more to precision machine. The reducing of ball reducer happens by cycloid curves and all instant relative velocity centers always pass on a given constant position when rotational running. Then, it is difficult to calculate cycloid curve for design and machining. So, this paper studied a software for the design of the ball reducer design and machined all parts included among cycloid curve. By using the developed software, this study has large benefit to design every ball reducer.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.92-99
• /
• 2004

With the advent of computers, CAD systems are widely used for various design practice. Complexity of CAD systems and difficulty of exchanging data among different CAD systems, however, do not allow efficient use as desired. In addition, to follow variety of designers' need, CAD activities should be customized. This article proposed a methodology fer developing an intelligent CAD system and the sate-of-the-art technologies described fur customizing CAD systems using API (Application Programming Interface). A basic platform is proposed and a useful application system is implemented to enable a parametric design by directly inputting numerical values on a CAD model. Based on this application, we developed a system that makes it possible to share part family data between SolidEdge and Pro/Engineer. The proposed concept on intelligent CAD systems facilitates integration of external systems such as CAE tools and promotes the use of CAD for both engineering designers and analysts.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1340-1345
• /
• 2003

In this paper, an integrated optimal design software system for structural components has been developed which interfaces existing commercial codes for CAD, CAE and Optimization. They include specialized optimal design software codes such as iSIGHT and VisualDOC, optimization module imbedded in CAD software developed by CAD developers, and optimal design software systems based on API of commercial CAD software. The advantages of the CAD imbedded optimal design approach and those of specialized optimal design software are taken to develop the system. The user defines optimal design formulation in the user interface for problem definition in the CAD control stage, where design variables are directly selectable from the CAD model and various properties and performance functions defined. The commercial CAD codes, Open I-DEAS are used for the development. The resulting software is minimally connected to CAD and CAE systems while keeping maximum independence from each other. This assures flexibility and freedom for problem definition. Fatigue life optimization is taken as a nontrivial application area. As a specific example, the shape design of a knuckle part of an automobile is performed, where the minimum fatigue life over the material domain in terms of the number of cycles of a curb strike are maximized under the constraint of not exceeding the current mass. The fatigue life has been improved by four times of the initial life. The developed software is illustrated to maintain the advantages of existing optimal design software systems while improving independency and flexibility.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 1997

This paper presents design automation system using API and parametric modeling of solid modeler, which is applied on axial fans for cooling towers. The design data including chord length and twist angle according to the fan length are given by design program, and API functions are applied to automate the modeling and assembly process of fan blade. The boss to connect fan and motor is designed with parametric design function provided by UG so as to be flexibly changed by the value of design parameters. The process of generating 2-D drafting for parts and an assembly is also automated. With developed system, the modeling time is reduced to 5 minutes even with unskilled operators.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.43-53
• /
• 2009

The purpose of this study is to show inherent and differentiated beauty by designing costume knitwear using Dancho patterns representing peculiar beauty, thus expressing free and convenient knitwear in the modern sense for women with the image of reasonableness and elegance, proposing knit design using high-class materials for satisfying the demand for the highest. With regard to expression technique of works, I selected computer Jacquard method to indicate effective comparison effect of expression material and made expression with $12{\sim}14$ gauge as base by using computer knitting machine. Through above-mentioned research process and design using Knit CAD system, I obtained following conclusion. First, it is possible to express variously and widely traditional patterns by making the most of the beauty of the orient and by recomposing the patterns of plant patterns representing "feminine image". Second, it is possible to widely represent the sense you can feel from knit by expressing variously diversity of knit structure and Jacquard knitting structure and gauge. Finally, it is possible to express designs more freely and imaginably by using computer Knit CAD system instead of actual knitting of various knit expression technique and materials application.

• 한국의상디자인학회지
• /
• 제9권2호
• /
• pp.49-57
• /
• 2007

The purpose of this study was to research the efficient tool of the exclusive fabric simulation in Jacquard Textile CAD system. For performing this design study, it designed the surface design of the abstract images of flowers through EAT Designscope CAD system and simulated the interior fabric. To merchandise the fashion items and see the visual image, these fabric simulations was effected by two or three-dimension modeling through EAT designscope, YongWoo CNI, Alias and so on. The result of this study can be summarized as follows. Before the step of weaving the samples from the surface design works, jacquard fabric design can be done very efficiently to apply the design step of the fabric simulation in CAD(Computer Aided Design). As the usage of the simulation tool in CAD system, jacquard design can be easily feed-back to modify for the right fabrics and produced the various designs in the short running time very efficiently. Therefore, this jacquard design system ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.42-47
• /
• 2016

CAD를 이용한 제품의 설계는 전체적인 제품개발공정의 효율성에 있어 핵심적인 역할을 하고 있다. 따라서 설계자가 어떻게 제품을 모델링 하느냐에 따라 모델의 품질이 달라질 수 있으며 이는 이후에 진행되는 하위 공정의 효율성에 지대한 영향을 끼치게 된다. 이에 본 논문에서는 모델의 품질을 향상할 수 있는 모델링 교육 시 강조하여야 할 3가지 개념을 제시하였다. 이러한 개념을 대학에서의 CAD교육에 적용함으로써, 작게는 모델의 변환과정에 소요되는 시간 및 노력을 현저히 감소시키고, 나아가 제품개발공정의 효율성향상과 동시에 궁극적으로, CAD와 CAM같은 서로 다른 도메인간의 통합에 긍정적인 영향을 줄 것으로 기대한다.