• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.39-44
• /
• 2013

Motor vehicle crashes are the leading cause (70%) of children injury and fatality. 98% of Children under the age of 9 who came to emergency room with a traffic accident are not seated in CRS. Reduction in mortality when using CRS (NHTSA study), 71% for infants of 1-2 years old, 54% for 3-6 years old and 7-12 years old. It is very important and essential to use CRS for child passenger safety. But in Korean market, the CRS fitment rate is relatively low (20~40%). For European market, at the start of 2013, Euro NCAP started to check how easy it is to install the most common seats. And US market, NHTSA is planning a new consumer information program of CRS fitment for near future. This study examines CRS installation performance of 3 vehicles which are produced by GM Korea and 21 CRS which are based on sales volume in Korean market. Purpose of this study is to identify both vehicle and CRS design that causes bad interaction for CRS installation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.309-310
• /
• 2006

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.446-451
• /
• 2022

In this study, to improve capacity and cycle stability, the pitch coated nano silicon sheets/CNT composites were prepared through electrostatic bonding of nano silicon sheets and CNT. Silica sheets were synthesized by hydrolyzing TEOS on the crystal planes of NaCl, and then nano silicon sheets were prepared by using magnesiothermic reduction method. To fabricate the nano silicon sheets/CNT composites, the negatively charged CNT after the acid treatment was used to assemble the positively charged nano silicon sheets modified with APTES. THF as a solvent was used in the coating process of PFO pitch. The physical properties of the prepared anode composites were analysed by FE-SEM, XRD and EDS. The electrochemical performances of the synthesized anode composites were performed by current charge/discharge, rate performances, differential capacity and EIS tests in the electrolyte LiPF₆ dissolve solvent (EC:DMC:EMC = 1:1:1 vol%). It was found that the anode material with high capacity and stability could be synthesized when high composition of silicon and conductivity of CNT were used. The pitch coated nano silicon sheets/CNT anode composites showed initial discharge capacity of 2344.9 mAh/g and the capacity retention ratio of 81% after 50 cycles. The electrochemical property of pitch coated anode material was more improved than that of the nano silicon sheets/CNT composites.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.530-537
• /
• 2015

Photovoltaic (PV) modules are environmentally energy conversion devices to generate electricity via photovoltaic effect of semiconductors from solar energy. One of key elements in PV modules is "Backsheet," a multilayered barrier film, which determines their lifetime and energy conversion efficiency. The representative Backsheet is composed of chemically resistant poly(vinyl fluoride) (PVF) and cheap poly(ethylene terephthalate) (PET) films used as core and skin materials, respectively. PVF film is too expensive to satisfy the market requirements to Backsheet materials with production cost as low as possible. The promising alternatives to PVF-based Backsheet are hydrocarbon Backsheets employing semi-crystalline PET films instead of PVF film. It is, however, necessary to provide improved barrier property to water vapor to the PET films, since PET films are suffering from hydrolytic decomposition. In this study, a polyurethane adhesive with reduced water vapor permeation behavior is developed via a homogeneous distribution of hydrophobic silica nanoparticles. The modified adhesive is expected to retard the hydrolysis of PET films located in the core and inner skin. To clarify the efficacy of the proposed concept, the mechanical properties and electrochemical PV performances of the Backsheet are compared with those of a Backsheet employing the polyurethane adhesive without the silica nanoparticles, after the exposure under standard temperature and humidity conditions.

• Korean Parent-Child Health Journal
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2007

Purpose: Motor vehicle crashes are the leading cause of death among children younger than 14 years old. The purposes of this study were to 1) provide a basic overview of child safety seats, 2) review car seat safety usage and misuse, 3) suggest interventions to motivate the usage of child safety seats. Method: The design was a descriptive study with literature review. Previous studies were searched of PUBMED, ProQuest and KERIS. Result: Child safety seats and automobile safety belts protect children in a crash if they are used correctly, but if a child does not fit in the restraint correctly, it can lead to injury. A child safety seat should be used until the child correctly fits into an adult seat belt. Conclusion: To improve child passenger's safety, educational, legislational and environmental enforcements are needed: educational interventions to promote use of child safety seats, strengtened legislation to mandate use of child safety seats, establishment of public acquirements.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.253-255
• /
• 2007

The increasing requirement for consistency and quality in the automotive industry started the development of a Machine Vision Inspection System (MVIS) for a car seat bottom cushion frame with the goal of providing a higher precision Inspection System with minimal components and less human intervention. The modifications made to an existing PC-based MVIS were shown to improve the accuracy and precision of the system. By using four monochrome cameras, the working distance was lowered and the image distortions were lessened without resorting to extensive image processing. The inspection scripts were evaluated if it could recognize good and bad products and were shown to be robust and able to reach an acceptable level of precision. It was also shown that the amount of human interaction was lessened.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.518-525
• /
• 2004

The thermoelectric device was applied to a car seat to control the hot temperature in the summer and cold temperature in the winter. The characteristics of the device used to a car seat were analyzed. The air conditioning structure was designed to regulate the hot side of the thermoelectric device. To control the temperature of the car seat, a robust control algorithm based on the sliding mode control was applied, and a controller using one-chip microprocessor was developed. The performance of the proposed controller through experiments was shown.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.453-455
• /
• 2008

경제발전이 가속화 되고 인간의 삶의 질이 향상되면서 차량보유가 증가함에 따라, 유아용 카시트의 사용이 증가하고 있는 실정이다. 또한 주 5일제 확대 및 가정을 중요시 하는 사회적 문화의 변화에 따라 유아와의 이동이 편리한 유모차의 사용이 증대되고 있다. 이와 같이 이동 편의성을 고려한 유모차의 사용이 증대되고 있다. 기존의 유모차는 세로로 접어지는 접철식이 대부분으로 접어서 이동시와 차량에 보관할 때와 프레임이 무거운 경우 여성이나 고령자가 사용 시 많은 힘을 필요로 하므로 불편함을 호소하고 있다. 본 연구에서는 사용자가 불편함을 느끼는 중량문제와 이동시 편의성 고려를 위한 접이방식을 개선하는 방안을 연구 하고자 한다. 이를 위하여 유모차의 프레임의 경량화 설계방안 및 폴딩 접이구조에 대한 연구를 수행 하였다.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.868-874
• /
• 2008

The Ni based adsorbent was prepared by co-precipitation method and its performance for removing carbon monoxide was investigated. Here, silica, aluminium silicate and ${\gamma}$-alumina were used for carriers of catalyst. $Ni(NO_3)_2{\cdot}6H_2O$ and $Ni(CH_3COO)_2{\cdot}4H_2O$ were utilized for Ni precursors. Precipitants were urea and citric acid. After precipitation of Ni salt on the carrier and following reduction using $H_2$ gas, adsorbent was prepared and its performance was analyzed based on EDS, TPR and XRD experiments. In accordance with change of precipitation agents, Ni salts on carrier, carriers and reduction condition. Adsorbent performance for removing carbon monoxide was investigated. The adsorbent with 54.8 wt% Ni prepared using urea precipitant under reduction condition at $500^{\circ}C$ for 3 h exhibited the best CO removal performance.

• Journal of East-West Nursing Research
• /
• v.27 no.2
• /
• pp.177-184
• /
• 2021

Purpose: Traffic accidents are the major cause of death in children. Car seat usage in children is important to reduce the risk of death or injury caused by traffic accidents. This study aims to analyze the trends of car seat use among children ages under 6. Methods: This study adopted a cross-sectional study utilizing the Korea National Health and Nutrition Examination Survey from 2015 to 2019. In total, 1,999 responses were included for the analysis. Factors associated with car seat use were age, sex, body weight, height, family type, household income, and monthly household income. Regression analysis was used to compare the car seat use before and after the revision of the Road Traffic Act (2015~2018 vs. 2019). Results: We found that car seat use was increasing by year, age, region, and household income. Car seat use was higher after fines increased in 2019. Age and body weight had negative association with car seat use, while height and household income had positive association with car seat use. Conclusion: Car seat use increased from 2015 to 2019 and is associated with different ages among children and household income. Further education and promotion that describes the safety benefits to children from car seat use are needed.