• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.161.1-161.1
• /
• 2015

복합소재는 두가지 이상의 서로 다른 물질을 조합하여, 단일 물질이 가질 수 없는 뛰어난 특성을 가진 소재로 그 중 전기 전도성 복합소재는 일반적으로 폴리머와 전도성 필러의 혼합을 통해 만들어 전자파 차폐, 대전 방지 등의 목적으로 사용되고 있다. 종류에 따라 기존 금속 소재에 비해 가볍거나 탄성율이 높은 등의 장점이 있으나 필러나 레진에 따라 재활용에 어려움이 있으며 전도성 필러로 주로 쓰이는 카본블랙 등이 석유/천연가스 등의 한정적 자원으로부터 만들어짐에 따라 환경적인 이슈가 최근 부각되고 있다. 목재는 가장 널리 쓰이는 소재 중 하나로 재생 가능하며 친환경적인 특성으로 인해 더욱 다양한 분야로의 활용이 모색되고 있다. 본 연구에서는 목재 소재의 탄화를 통해 만들어진 탄화목분의 전도성 필러로의 적용가능성을 시험하고자 CBT 레진과 탄화목분 필러의 복합소재를 제작하였다. 탄화 목분 복합소재의 전도성은 20 wt% 필러 함량 기준 카본블랙 복합소재 전도도에 20%에 이르렀으며, 전도도의 향상을 위해 필러의 플라즈마 처리 시 복합소재의 전도도가 급격히 향상되어, 카본 블랙 복합소재 전도도의 3배에 이르렀다. 플라즈마 처리가 탄화목분 복합소재의 전도도향상에 미치는 영향을 분석하기 위해 micro-CT, TGA 분석을 수행하였으며, 플라즈마 처리 시 탄화 목분 필러가 일부 미분화 되어 복합소재의 전도도를 향상하는 것으로 나타났다. 이와 같이 탄화 목분의 전도성 복합소재 적용과, 탄화목분의 플라즈마 처리를 통해 친환경적일 뿐만아니라 전도도도 우수한 복합소재를 구현하였으며, 실험적으로 전도도 향상 메커니즘을 확인하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.1-13.1
• /
• 2009

에어로젤은 인류가 개발한 소재 중에서 가장 가벼운 고체로, 기공률이 90%이상이고 비표면적은 ~1000m2/g, 기공의 크기는 10nm 크기로 이루어진 나노기공 물질이다. 1931년에 Kisley가 물유리로부터 실리카 에어로젤을 합성한 이래로 실리카 에어로젤에 대한 연구가 가장 많이 이루어져왔으며, 단열소재, 흡음재, 체렌코프우주선 디텍터, 반도체의 초저유전소재, 유출된 석유의 정제, 촉매 등에 대한 응용에 대해서도 연구가 많이 이루어져 왔다. 그리고TiO2와 같은 광촉매 에어로젤 소재, 카본 에어로젤 소재등 다양한 나노기공 소재에 대해서도 연구가 이루어지고 있으며, 카본 에어로젤의 경우 나노기공과 비표면적을이용한 전기이중층 커패시터 (EDLC)에 대한 연구도 이루어지고 이다. 본 연구에서는 첫째로, 실리카 에어로젤에 대한 연구결과를 소개하고 이의 단열소재로서의 응용가능성에대하여 언급하고자 한다. 실리카 에어로젤 나노기공 소재의 경우, 기공크기가 10nm크기로 매우 작고 공기의 자유이동길이와 거의 비슷하여서 대류에 의한 열전달을 낮출 수 있으며, 낮은 고체함량으로 인하여 포논에 의한 열전달을 낮출 수 있기 때문에 단열소재로서 최고의 성능을 나타낸다. 하지만, 문제는 높은 기공률로 인한 기계적인 취약성이 문제이다. 따라서 이를 보완하기 위항 섬유로 에어로젤을 보강할 수 있는데, 이를통하여 에어로젤 나노기공소재와 섬유보강에 의한 복합화에 대하여 말하고자 한다. 또 다른 하나의 연구방법은유기-무기 하이브리드 나노기공 소재를 합성하는 것이다. 여기서는하나의 방법으로 MTEOS-TEOS의 하이브리드화와 초임계 건조공정에 의한 나노기공 소재에 대한 연구결과를소개하고자 한다. 마지막으로 카본 에어로젤 나노기공소재의 합성과 나노기공 구조의 제어 및 물성평가에 대한 것을 말하고자하는데, 본 발표에서는 레소시놀과 포름알데히드를 촉매에 의한 중합반응을 통하여 유기 에어로젤 소재를 합성하고 분위기에서탄소화 공정을 통하여 카본에어로젤을 합성하였다. 또한 금속 니켈을 도입하는 것에 의하여 탄소/니켈 복합 하이브리드 에어로젤 소재를 합성하고 슈퍼커패시터 전기화학 특성에 대한 연구결과를 발표하고자 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.77-82
• /
• 2014

Stretchable electrodes are focused due to many demands for soft electronics. One of the candidates, carbon black composites have advantages of low cost, easy processing and decreasing resistivity in a certain range during stretching. However, the electrical conductivity of carbon black composites is not enough for electronic devices. Graphene is 2-dimensional nanostructured carbon based material which shows good electrical properties and flexibility. They may help to improve electrical conductivity of the carbon black composites. In this study, graphene was added to a carbon black electrode to enhance electrical properties and investigated. Electrical resistivity of graphene added carbon electrode decreased comparing with that of carbon black electrode because graphene bridged non-contacting carbon black aggregates to strengthen the conductive network. Also graphene reduced an increase in the resistance of the carbon black electrode applied to strain because they connected gap of separated carbon black aggregates and aligned along the stretching direction at the same time. In conclusion, an addition of graphene to carbon black gives two benefits on the electrical properties of carbon black composite as a stretchable electrode.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.89-95
• /
• 2022

In this study, glassy carbon coating was performed on the graphite using a phenolic resin and a curing agent was mixed with ethylene glycol as an additive to form the uniform surface. The phenolic resin was dried and cured under the environments of hot air, then converted into a glassy carbon layer by pyrolysis at 500~1,500℃. FTIR, XRD, SEM analysis, and density/porosity/contact angle measurement were performed for characterization of glassy carbon. The pyrolysis temperature for high-quality glassy carbon was optimized to be about 1,000℃. As the content of the additive increased, the effect of reducing surface defects on the coated surface, reduction of porosity, increase of contact angle, and increase of density were investigated in this study. The method of forming a glassy carbon coating layer through an additive is expected to be applicable to graphite coating and other fields.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.55-61
• /
• 2015

Stretchable electrode materials are focused to apply to flexible device such as e-skin and wearable computer. Used as a flexible electrode, increase in electrical resistance should be minimalized under physical strain as bend, stretch and twist. Carbon black is one of candidates, for it has many advantages of low cost, simple processing, and especially reduction in resistivity with stretching. However electrical conductivity of carbon black is relatively low to be used for electrodes. Instead graphene is one of the promising electronic materials which have great electrical conductivity and flexibility. So it is expected that graphene added carbon black may be proper to be used for stretchable electrode. In this study, under stretching electrical property of graphene added carbon black composite electrode was investigated. Mechanical stretching induced cracks in electrode which means breakage of conductive path. However stretching induced aligned graphene enhanced connectivity of carbon fillers and maintained conductive network. Above all, electronic structure of carbon electrode was changed to conduct electrons effectively under stretching by adding graphene. In conclusion, an addition of graphene gives potential of carbon black composite as a stretchable electrode.

• Electrical & Electronic Materials
• /
• v.32 no.4
• /
• pp.22-31
• /
• 2019

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.367-374
• /
• 2002

Electrical characteristics of crystalline polymer composites filled with nano-sized carbon black particle were studied. The developed composite system exhibited a typical positive temperature coefficient resistance (PTCR) characteristic, where the electrical resistance sharply increased at a specific temperature. The PTCR effect was sometimes followed by a negative temperature coefficient resistance (NTCR) feature with temperature, which seemingly caused by the coagulation of nano-sized carbon black particles in the excessive quantity. The PTCR temperature was controlled by the carbon black content and the external voltage. The change of electric conductivity was shown as a function of carbon black content, and the resistance was constant when the carbon black content was over 20 wt%. The room-temperature resistance was maintained by a repeated heating and cooling. The excellent PTCR characteristic was demonstrated by the low resistance in the initial stage and the instantaneous heating capability.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.241-248
• /
• 2003

We controlled the amount of Y$_2$O$_3$additives, 8 mol% and 10 mol%, and the type of carbon pore former, activated carbon and carbon black, to improve the strength of porous NiO-YSZ anode materials for solid oxide fuel ceil. The 3-point flexural strength, porosity and electrical conductivity were evaluated. As a result, the strength of anode materials with the addition of carbon black was markedly improved. The strength of NiO-10 mol%YSZ sintered at relatively higher temperature was higher than that of NiO-8 mol%YSZ materials. The electrical conductivity of NiO-10 mol%YSZ with carbon black was evaluated as much as 10$^2$∼10$^3$S/cm at 700$^{\circ}C$∼1000$^{\circ}C$ in reducing atmosphere.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.296-301
• /
• 2007

Carbon nanofibers (CNFs) are non-microporous materials with a high surface area ($100{\sim}200m^2/g$) and high purity. Therefore, the material has a high potential for use as catalyst support. Activated carbon fibers (ACFs) are of increasing concern with regard to the levels of toxic air pollutants emitted from high-technology industry. Rayon-based CNFs and ACFs was subjected to thermal oxidation under a wide variety of temperature and air conditions to modify the surface properties. Rayon-based CNFs and ACFs were prepared by using thermal chemistry. CNFs were synthesized at temperatures above $600^{\circ}C$ in an air atmosphere and grew with increased temperature and air conditions. After heating at $800^{\circ}C$ for 72 hr, carbonized rayon with ACFs had $2,662m^2/g$ (BET) of surface area and $1.41cm^3/g$ of pore volume. The resulting ACFs had a 99% surface area in which pore size was 10 nm or less, and a 60 % surface area in which pore size was 2 nm or less.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.746-752
• /
• 2016

In this study, soft carbon was prepared by carbonization of carbon precursor (pitch) obtained from PFO (pyrolysis fuel oil) heat treatment. Three carbon precursors prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3 h), 4001 (at $400^{\circ}C$ for 1 h) and 4002 (at $400^{\circ}C$ for 2 h). After the prepared soft carbon was ground to a particle size of $25{\sim}35^{\circ}C$, the soft carbon was synthesised by the chemical treatment with boric acid ($H_3BO_3$). The prepared soft carbon were analysed by XRD, FE-SEM and XPS. Also, the electrochemical performances of soft carbon were investigated by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC=1:1 vol%+VC 3 wt%). The coin cell using soft carbon of $25{\sim}35^{\circ}C$ with 3903 soft carbon ($H_3BO_3$/Pitch=3:100 in weight) has better initial capacity and efficiency (330 mAh/g, 82%) than those of other coin cells. Also, it was found that the retention rate capability of 2C/0.1C was 90% after 30 cycles.