• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.39-43
• /
• 2009

In this paper, the flow characteristics of underfill material driven by capillary action between flip-chip and substrate were investigated. Also, the effects of viscosity level and dispensing point of underfill on flow characteristics were investigated. Flip chip package size was $5mm{\times}5mm{\times}0.65^tmm$, the diameter of solder bump was 100 ${\mu}m$, and the pitch was 150 ${\mu}m$. It was full grid area-array type with 1024 I/Os. The glass substrate was used and the gap between the chip and substrate was 50 ${\mu}m$. For the experimental study, three different underfills with different viscous properties($2000{\sim}3700$ cps), and two different types of dispensing methods(center dot and edge dot) were used. The flow characteristics and filling time of underfill were investigated by using CCD camera. The results show that the edge flow was faster than center flow due to the edge effect, which was caused by the resistance of solder bumps. In case of edge dot dispensing type, the filling time was faster due to the large edge effect, compared to center dot dispensing type. Also, it was found that the underfill flow was faster and the filling time decreased as the viscosity level of underfill was decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.101-106
• /
• 2001

In this work, an effort is made to investigate the behavior of a chip, from its initial flow to its final breaking stage. The expression for chip flow in grooved tools is verified analytically using FEM. Cutting parameters like velocity and depth of cut have a profound influence on chip flow behavior. Chip curling increases and, for a given tool geometry, effectiveness of the groove increases with increasing depth of cut. The feasibility of tool design using FEM simulations is also demonstrated. Optimization of tool geometry results in better chip control.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.67-72
• /
• 2001

An Effort has been made to more accurately analyze the flow in the chip cavity, particularly to model the flow through the openings in the leadframe and correctly treat the thermal boundary condition at the leadframe. The theoretical analysis of the flow has been done by using the Hele-Shaw approximation in each cavity separated by a leadframe. The cross-flow through the openings in the leadframe has been incorporated into the Hele-Shaw formulation as a mass source term. The optimization program based on the complex method integrated with flow analysis program has been successfully used to obtain the optimal filling conditions to avoid short shot.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.891-894
• /
• 2001

In this work, an effort is made to investigate the behavior of a chip, from its initial flow to its final breaking stage. The expression for chip flow in grooved tools is verified analytically using FEM. Cutting parameters like velocity and depth of cut have a profound influence on chip flow behavior. Chip curling increases and, for a given tool geometry, effectiveness of the groove increases with increasing depth of cut. The feasibility of tool design using FEM simulations is also demonstrated. Optimization of tool geometry results in better chip control.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.88-93
• /
• 2003

IC 패키지 기술중 Underfilling 은 칩과 기판사이에 Encapsulant의 표면장력을 이용하여 주입하고 경화시킴으로써 전기적 기계적 보강력을 제공하는 기술로서 시스템 칩의 발전과 함께 차세대 패키징 기술중의 하나이다. 본 연구에서는 기존의 Underfilling 공정을 개선하여 충전시간을 획기적으로 줄일 수 있는 가압식 Underfilling 공정을 이용하여 차세대 반도체 패키징에 적용할 수 있는 가능성을 파악하였다. 이를 위하여 칩과 기판사이에 주입되고 경화되는 Encapsulant의 유동특성을 파악하였다. 가압식 Underfilling기술은 아직까지 상용화되지 않은 미래기술로써 효율적인 몰드 설계를 위하여 Encapsulant 종류에 따라 Gate 위치, Bump Pattern 및 개수, 칩과 기판 사이의 거리, Side Region에 따른 유동특성등의 파악이 중요하다. 본 연구에서는 $DEXTER^{TM}(US)$의 Encapsulant FP4511 을 사용하여 Cavity 내에 Void 를 없앨 수 있는 주입조건을 찾아내고 Underfilling 시간을 감소시킬 수 있는 모사를 진행하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.147-156
• /
• 2001

본 연구에서는 칩 캡슐화 성형 공정 중의 패들 변형을 해석하기 위한 방법론이 연구되었다. 헬레쇼오 근사 모델에 근거한 유한요소법이 칩 캐비티에서의 유동 해석을 위해 사용되었다. 리드 프레임 상의 구멍을 통한 통과 유동해석을 위한 근사모델이 제안되었다. 본 연구에서 제시된 해석모델에 의해 계산된 값과 실험 값은 잘 일치하였다. 유동해석을 통하여 리드프레임과 패들에 의해 경계를 이루고 있는 상, 하 캐비티간의 압력차가 계산되었다. 최종적으로 패들 변형이 압력차 계산 값을 이용하여 계산되게 된다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.64-74
• /
• 2007

The continuous chip in turning operation deteriorates precision of workpiece and causes a hazardous condition to operator. Thus the chip form control becomes a very important task for reliable machining process. So, grooved chip breaker is widely used to obtain reliable discontinuous chip. However, developing new cutting insert having chip breaker takes long time and needs lots of research expense due to a couple of processes such as forming, sintering, grinding and coating of product and many different evaluation tests. In this paper, performance of commercial chip breaker is evaluated with neural network which is learned with a back propagation algorithm. For the evaluation, several important elements(depth of cut, land, breadth, radius) which directly influence the chip formation were chosen among commercial chip breakers and were used as input values of neural network. With the results of these input values, the performance evaluation method was developed and applied that method to the commercial tools.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.351-357
• /
• 2013

In flip chip packaging, underfill process is used to fill epoxy bonder into the gap between a chip and a substrate in order to improve the reliability of electronic devices. Underfill process by capillary motion can give rise to unwanted air void formations since the arrangement of solder bumps affects the interfacial dynamics of flow meniscus. In this paper, the unsteady flows in the capillary underfill process are visualized and then the racing effect and merging of the meniscus are investigated according to the arrangement of solder bumps. The result is shown that at higher bump density, the fluid flow perpendicular to the main direction of flow becomes stronger so that more air voids are formed. This phenomenon is more conspicuous at a staggered bump array than at a rectangular bump array.

• KIPE Magazine
• /
• v.21 no.3
• /
• pp.50-55
• /
• 2016

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1170-1182
• /
• 1989

본 연구에서는 해석 기하학적인 접근 방법으로서 전단응력으로 표현되는 3차원 절삭이론을 유도하고 이것을 정면밀링의 해석에 적용하여 기본적인 파라메트 들은 실험이 비교적 용이한 선삭에서 결정하고 그들을 이용하여 밀링절삭력을 유효 하게 예측할 수 있도록 하는 방법을 제시하였다.