• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.71-78
• /
• 2009

The analysis of the effect of loading on chloride penetration into concrete is very important. In this study, we confirmed that the chloride penetration rates for plain and BFS concrete were increased by 47% and 89% under compressive stress, respectively. The diffusion coefficient of BFS concrete was lower than for conventional concrete with no BFS, no loads, and under stressed states. Therefore, BFS substitution plays an important role in the repression of chloride penetration even under compressive stress. Under compressive stress,the diffusion coefficient for BFS concrete was higher with increasing stress, and this was also the case for plain concrete. However, BFS concrete was strongly influenced by compressive stress in comparison to plain concrete. We investigated the effect of the difference of specific surfaces on the diffusion coefficient. As a result, the larger specific surface of BFS exhibited a lower diffusion coefficient. This tendency was most pronounced under the high stress conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.552-560
• /
• 2012

Drug delivery technologies are patent protected formulation technologies that modify drug release profile, absorption, distribution, and elimination for the benefit of improving product efficacy and safety, as well as patient convenience and compliance. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other method of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stop if the drug dosage lead to side effect. Polysaccharide, such as karaya gum and locust bean gum(LBG)/water-soluble chitosan oligomer(WSCO) were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, tacrine contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in tacrine such as lipophilic drug in vitro. We used glycerin, PEG 400, and PEG 800 as enhancers. Therefore, transdermal absorption of tacrine could be improved by changing vehicle composition or by using penetration enhancers. Especially it would be anticipated that the high permeation efficacy could be obtained by using vehicle that has enhancing effect for itself and by adding enhancers to it.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.76-76
• /
• 2001

종이가 가지는 공극 특성은 종이의 광학적 특성에 지대한 영향을 미칠 뿐만 아니라 인쇄용 지로서 사용될 때 잉크의 다공성 기질로서 잉크의 잔류 특성에도 큰 영향을 미친다. 특히 다공성 기지의 표변에 유동성이 뛰어난 물질이 가해 질 때, 이들의 유동 특성은 기질이 지 니고 있는 공극율과 공극의 분포에 따라 큰 차이를 나타내는 것으로 알려져 있다. 이러한 공극성은 백상지의 경우 사용된 펄프의 혼합 비율과 충전제의 사용량 그리고 펄프의 고해 정도에 따라 종이의 공극울이 달라진다. 종이의 공극성이 광학적 특성과 밀접한 연관성을 지니는 것은 종이의 광산란 계수를 결정하기 때문이다. 잘 알려진 바와 같이 종이의 광산란 계수는 빛의 산란과 관계되어 백색도와 백감도에 영향을 미친다. 그러나 도공지가 인쇄 용 지로 사용 될 경우, 도공지 표면에 도피되는 영크층은 도공지가 가지고 있는 구조적 특성을 변화시킬 수 있는 제3의 요인으로 간주 될 수 있다. 결국, 인쇄가 완료된 종이의 경우 원지층, 도공층 그리고 잉크층으로 구성된다. 따라서 다양 한 공극 구조를 가지는 기질위에 잉크가 도피될 경우 기질의 공극 특성에 따라 잉크 조성분 의 침투 거동에도 많은 차이가 있을 것으로 예측된다. 잉크의 구성 요소를 살펴보면 잉크의 색상을 결정하는 안료, 단일의 각 안료 입자를 도포하여 인쇄판으로부터 종이까지 운송시키 는 기능과 인쇄기에서 잉크의 유동성을 유지하고 종이 또는 기타 피인쇄체에 전이된 후에는 건조막을 형성하는 비히클 그리고 각종 기능성 첨가제로 구성되어 있다. 동일한 성분으로 구성된 잉크를 사용하여 각각 공극성이 다른 피인쇄체 위에 인쇄 될 경우 이들 조성분의 이 동과 표면 잔류 특성에 변화가 있을 것으로 생각된다. 즉 공극성이 풍부한 기질에 도피된 잉크는 반대의 경우와 비교하여 보다 많은 조성분이 종이의 공극 속으로 침투하게 될 것이 다. 이 과정에서 특히 미세한 안료 입자의 경우 피인쇄체의 표면 공극을 채우고, 비히클의 경우 미세한 공극속으로 침투되어 경화됨으로써 피인쇄체가 지니고 있는 공극량을 감소시커 게 될 것이다. 그리고 피인쇄체의 각종 형태의 공극으로 침투된 잉크의 양에 반비례적으로 피인쇄체의 표변에 잉크가 잔류하게 될 것이다. 따라서 본 연구에서는 여러가지 안료를 사용하여 각각 다른 공극 특성을 지니는 도공지를 제조한 후 이들이 가지는 공극 특성과 잉크의 잔류 거동에 대해 고찰해 보고자 하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.210-210
• /
• 2020

LID (Low Impact Development, 저영향개발)는 산업화 및 도시화 진행 지역에서 비점오염원으로부터 배출되는 오염물질을 제어해 개발지역 내 자연순화 기능을 최대한 유지하고, 물순환 기능증대를 통해 강우 유출수를 지역 내에서 관리하는 것을 목표로 한다. 비점오염원 저감 LID 시설에는 자연형과 장치형 시설이 있다. 자연형 시설에는 저류형, 침투, 식생형 시설 등이 있다. 특히, 침투시설에는 대표적으로 투수블럭이 있으며, 이는 투수성 포장재를 통해 강우 유출수를 지하로 침투시켜 여과나 흡착 등으로 비점오염물질을 제어하는 시설이다. 장치형 시설로는 여과재나 망을 이용해 비점오염물질을 분리하는 여과형 및 스크린형 시설, 응집과 침전을 통해 비점오염물질을 분리하는 응집·침전 시설 등이 있다. 이에 본 연구는 2016년부터 2018년 3년간 전주 서곡지구 지역 내 설치된 필터형 투수블럭, 틈새형 투수블럭에서 진행했다. 각각의 투수블럭에서 총 19회, 20회의 강우 모니터링을 실시했고, 오염물질 유입 및 유출 EMC 등의 분석을 통해 유출 및 오염물질 저감효과를 분석했다. 연구 대상 각 투수블럭의 주요 제원은 시설 용량 14.4㎥, 시설 면적은 14.4㎡이다. 모니터링 결과값을 분석한 결과 필터형 투수블럭의 경우 유출 저감율은 17.4 ~ 100%, 틈새형 투수블럭은 29.6 ~ 100%이었다. 필터형 투수블럭과 틈새형 투수블럭의 단위면적당 유량 저감량은 각각 0.014 ~ 0.583㎥/㎡, 0.035 ~ 0.588㎥/㎡이었다. 오염물질 저감효율을 분석한 결과 유기물 항목(BOD, TOC)의 경우 틈새형 투수블럭에서의 저감효율(BOD 93.59%, TOC 90.39%)이 필터형 투수블럭에서의 저감효율(BOD 89.99%, TOC 86.94%) 보다 다소 높게 나타났다. 영양염류 항목(T-N, T-P)의 경우 필터형, 틈새형 모두 비슷한 저감효율(필터형 T-N 89.02%, 필터형 T-P 98.12%, 틈새형 T-N 90.41%, 틈새형 T-P 98.04%)을 보였다.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.785-796
• /
• 2006

This study was designed to evaluate the changes in sperm motility, viability, HOST(hypo-osmotic swelling test), IVP(in vitro penetration), SCSA(sperm chromatin structure assay) during storage of liquid semen collected from boars with different farrowing rates using AI, and to find the relationship between boar fertility through AI and sperm diagnostic parameters during semen storage. The results of HOST were significantly decreased according to the increasing of in semen storage days and the results of IVP were significantly decreased at 3 days of semen storage (P<0.05). The %Red was significantly different among the >80%, 70󰠏80% and <70% farrowing rate group at semen storage day 6(P<0.05). The correlation coefficients between the %Red and farrowing rate were increased according to the semen storage. In conclusion, these results suggest that the sperm parameters evaluated in these studies may be useful indicators to predict the fertility of AI and evaluate the semen quality in boars.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.179-184
• /
• 1981

This paper has been prepared to compare the safety factor of Fellenius method and Bishop method which are most frequantly utilized for stability analysis of dam and natural slope. The results are as follows. 1. Safety factor obtained by Bishop method shows 11-29% higher in steady seepage state and 46-57% higher in no seepage flow than the one by Fellenius. 2. The ratio of safety factor between no seepage flow and seepage flow ($F_1-F_2/F_2$) increases as the slope becomes flatter. 3. The ratio of safety factor between Bishop method and Fellenius ($F_B-F_F/F_F$) decreases as the slope becomes flatter.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.303-310
• /
• 2004

The purpose of this study was to investigate the effect of using method and replacement ratio of limestone powder and water-cement ratio on the compressive strength and the resistance to sulfate attack of mortar incorporating limestone powder as fundamental study to use limestone powder as an addition for concrete. As a results, The method using limestone powder as a part of cement showed decrease of the compressive strength of mortar. The strength of mortar incorporating limestone powder almost decided upon unit cement content. It was recognized that the method replacing limestone powder as a part of cement was effective to decrease the heat of hydration in concrete. The method using limestone powder as a part of fine aggregate showed the considerable increase of the strength and resistance to sulfate attack of concrete. Furthermore, it was recognized that the method using limestone powder as a part of fine aggregate were effective materials as an addition for concrete in view of the improvement of strength and resistance to sulfate attack.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.11-16
• /
• 2005

In this paper, the hydrogen osmosis test and the mechanical tensile test were carried out to examine hydrogen cracking behavior of STS444 with welding conditions. In $0.5MH_2SO_4+0.001M \;As_2O_3$ solution, the hydrogen embrittlement characteristics of weld zone of STS444 added to load of $1,400 kg/cm^2$ together with hydrogen osmosis by current of $30mA/cm^2$ for 60 min. was considered. As a result of study on the hydrogen embrittlement and mechanical characteristics of STS444외와 with welding conditions the tensile stress and elongation of STS444 get lower by the absorption of oil or water before welding. Also, the reduction rate of tensile stress and elongation of STS444 is larger because of hydrogen embrittlement by the absorption of oil or water. STS444 by the absorption of water before welding is more sensitive to hydrogen embrittlement than oil.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.421-429
• /
• 2018

Purpose: This study conducted a slope stability study considering changes in the ground water level due to rain phenomena and the duration of rainfall, that is for the purpose of analyzing the stability of the slope surface of the cut section, seepage numerical analysis is performed by height of slope and rainfall accident, and the characteristics of rainfall was applied reasonably in order to determine the slope change during rain by analyzing rainfall and rainfall pattern due to climate change. Results: As a result of numerical analysis of stability for slope composed of the granite weathered soils according to the characteristics of rainfall(Uniform Rainfall, US Army Corps., Huff's method - 1/4, 4/4), Conclusion: The higher the slope, the smaller the safety factor of the slope, the smaller the elevation of the ground water level as the rainwater seepage does not reach the underground water level. In addition, the ground water level was assessed to be rose significantly in condition of case 3 Huff's method - 1/4, rain pattern with the largest initial rainfall duration, and the safety factor was analyzed to be small.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.50-57
• /
• 2004

This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fungi was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi (Tyromyces palustris) and brown rot fungi (Trametes versicolor) showed that the treated sample has a decay resistance to these two fungi.