• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.63-67
• /
• 2003

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs, to improve durability of structure. This study separately examined physical and chemical specific of quality liguid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.63-67
• /
• 2003

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs to improve durability of structure. This study separately examined physical and chemical specific of quality liquid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.299-300
• /
• 2023

In this study, the performance evaluation and structural safety of rainwater permeation detention block were analyzed. As a result, the compressive strength (19.3 MPa), flexural strength (5.2 MPa), and permeability coefficient (2.0 mm/s) of the eco-friendly prefabricated rainwater permeable detention block satisfied the KS F 4419 and SPS-KCIC0001-0703 and it was confirmed sufficient safety even under maximum load.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.138-144
• /
• 1996

At present, waterproof is absolutely needed to minimize the carbonation of bridge decks in Kor ea. In this research indoor experiments for penetrative waterproof admixture out of available methods are carried out to evaluate the resisting characteristics against natural arid artificial car bona ting conditions. The test results show that the optimal time of waterproof is 14 days after the concrete construc. tion but reconsideration is necessary for the application to high strength concrete because of the reduction in penetration of waterproof admixture. The results also show that the penetrat ive waterproof admixture has srrong resistance to the acid rain. However the waterproof capability of the admixture is not permanent especially under the natural exposure. Therefore the slab of a bridge should be paved with asphalt concrete. Other noticeable effects are the increase of heat and abrasion resistances from the use of the waterproof agents.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.511-519
• /
• 1992

A microcomputer based control system was constructed to save energy consumption in the thermal sterilizing process. The functional accuracy of system was evaluated through the analysis of the thermal diffusivities of the model solid food, Alaska pollack surimi. The heat penetration curves obtained through the experiments were typical for solid foods. The practical thermal diffusivity calculated from heat penetration curve was a constant value at steady sterilizing temperature, and this was independent of the holding time. At different temperatures, the thermal diffusivity values did not show remarkable differences when compared with those predicted by some experimental equations cited from the literatures. The maximal difference was within the range of $\pm10.0\%$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.444-444
• /
• 2015

현제 도시유역의 산업화와 도시화로 인해 유역 내 불투수면적의 증가는 직접 유출량 증가, 지하수자원 고갈, 침투량 감소, 증발산량의 감소 등의 물 순환 체계의 변화를 가져왔다. 이러한 도시 유역 내 물 순환 체계 변화를 개선하기 위해 여러 국가에서 저영향개발(Low Impact Development, LID)의 개발 및 도입이 진행되고 있다. LID는 분산형 빗물관리 시설로써 유역 내 소규모의 LID 요소기술을 대상유역에 적용하여 강우유출수를 저류, 체류, 방지 및 처리하는 시설을 의미한다. LID는 궁극적 목표로 계획단계에서 개발이전의 수문기능을 유지하기 위해 보전, 영향최소화, 유출이동시간 유지, 추가유출량 감소, 오염발지에 초점을 맞추어 계획된다. 현제 LID의 성능 및 적용성에 대한 다양한 연구가 진해되어지고 있으나, LID 요소기술별 시공 비용, 유지관리 비용, 강우유출수 저감효율, 비점오염원 저감효율, 적용위치 등의 다양한 인자를 복합적으로 고려하여 LID요소기술별 적용성 평가를 수행한 연구는 미미한 실정이다. 따라서 본 연구에서는 LID 요소기술 중 나무화분 여과장치, 옥상녹화, 빗무정원, 투수성포장, 침투트렌치, 빗물통, 식생수로 등의 총 7가지 LID 요소기술을 대상으로 연구를 수행하였다. LID 요소기술의 적용성평가를 수행하기 위해 시공비용, 유지관리비용, 강우유출수 저감효율, 비점오염원 저감효율, 적용위치 등의 촐 5가지 평가인자를 Entropy 방법을 이용하여 평가인자별 가중치를 산정하였다. 이후 다기준의사결정 방법 중 PROMETHEE 방법을 이용하여 LID 요소기술의 우선순위를 산정하였다. 현제 PROMETHEE 방법을 이용하여 LID 요소기술별 우선순위를 산정한 결과 옥상녹화가 첫번째 우선순위로 분석되었으며, 침투트렌치, 나무화분여과장치, 투수성포장, 식생수로, 빗물통, 빗물정원 순으로 분석되었다. 따라서 국내에 LID를 적용할 경우 옥상녹화, 침투트렌치, 나무화분 여과 장치 등의 LID 요소기술의 적용성 및 기대효과가 클 것으로 판단된다. 그러나 국내의 모든 지역을 대상으로 적용하기에는 문제가 있으며, 국내 LID 요소기술 적용 시 기초자료로 사용될 수 있을 것으로 판단된다. 대상지역별 신뢰도 높은 LID 요소기술 적용성 평가를 위해서는 대상유역 내 시공된 LID 요소기술을 계측하여 비점오염원 및 우수유출수 저감효율, 시공 비용, 연간 유지관리 비용을 분석하여 평가를 수행되어 한다고 판단된다.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.341-348
• /
• 2017

The performance degradation of concrete pavement by winter deicer is very serious in Korea, and its maintenance and rehabilitation brings a high expense. Therefore, a suitable method for rehabilitation of such concrete pavement and repair material of proper performance are required. In this study, the properties of compressive strength, ability to resist chloride ion penetration, and properties of dry shrinkage of magnesium phosphate ceramics were assessed to evaluate its applicability as a repair material for concrete pavement in Korea. As a result, the mortar flow showed a normal level of 190 mm, but the viscosity was high and the self-flow ability was poor. The setting time was 12 minutes, leading very rapid-hardening, and thus a prompt work was required. The compressive strength of mortar was 38.4MPa in 2 hours, 73.8MPa in 24 hours, and 111.0MPa in 28 days, showing a significant level. As a result of the test to chloride ion penetration resistance, mortar showed 143 Coulombs, and concrete showed 172.6 Coulombs, which fell under very low level. The drying shrinkage of MPC concrete in 40 days was below $60{\times}10-6$, and comparing with normal cement concrete, it showed the level below 1/10 of other concrete to secure an excellent volume stability. As above, magnesium phosphate ceramics has excellent strength performance, chloride ion penetration resistance, and volume stability, and this in the future shall be used in construction under the consideration of working time or workability, requiring further improvement for such performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2020

This study examined the applicability of the vacuum impregnation post-processing to enhance the strength of binder jet 3D printed output. In addition, permeability, bulk density, and compressive strength of 10 mm, 20 mm, 30 mm, and 40 mm cubic specimens were examined to check the strength limit depending on the 3D prined output size. In result, as the maximum pressure increased, the post-processing storage solution permeated to the inside of the 3D printed sample and thus the permeation area ratio was improved. The compressive strength and the permeation area indicate the correlation between the exponential function of the adjusted R-square factor 0.992. In addition, the bulk density was increased, which can be inferred as the post-processing solution permeated to the inside. In conclusion, in order to enhance the compressive strength of the binder jet 3D printed output, it is essential to permeate the post-processing solution to the inside of the output, and vacuum impregnation can be proposed as an effective method.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.61-66
• /
• 2009

최근 초고층 건축물 등에 적용되는 고강도콘크리트의 내화성능에 대한 문제점이 제기됨에 따라 국토해양부에서는 고강도콘크리트 내화성능 관리 기준을 고시한 바 있으며, 건설업계에서도 이에 대응하기 위해 다양한 기술 검토가 이루어지고 있다. 본 연구에서는 고강도콘크리트의 취약점으로 제기되고 있는 화재시의 폭렬문제에 대한 대응방안으로서 기존 연구를 통해 내화성능이 우수한 것으로 보고되고 있는 ECC 를 영구거푸집으로 활용한 고강도콘크리트의 내화성능을 검토하였다. ECC 영구거푸집을 활용한 고강도콘크리트 기둥부재의 내화성능 검토 결과, 영구거푸집과 고강도콘크리트 계면으로의 열 침투를 제어할 수 있도록 부재 생산 및 구축 방안을 검토하고, ECC의 적정 배합 및 두께를 확보한다면 고강도콘크리트의 내화성능 확보기술로서의 활용이 가능할 것으로 판단된다. 또한, 내화성 영구거푸집으로서의 단순 활용 방안 이외에 ECC의 우수한 물리적 성능을 활용하여 구조성능을 분담할 수 있는 방안으로의 지속적 검토가 필요할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.77.1-77.1
• /
• 2010

Durability problems of gas diffusion layer(GDL) is one of the important issues for accomplishing commercialization of proton exchange membrane fuel cell(PEMFC). GDL is strongly related to the performance of PEMFC because one of the main function of GDL is to work as a path of fuel, air and water. When the GDL is degraded, it causes water balance problems such as the flooding phenomenon. Thus, investigating the durability characteristics of the GDL is important and understanding the GDL degradation process is needed. In this study, the GDLs are degraded by carbon corrosion stress method which is the electrochemical degradation mode. To determine the effects of carbon corrosion of the GDL, 1.45 V of potential is imposed for 96 hours. In this manner, in the previous research, the structure between the substrate and the MPL is weaken. Further investigations are needed to clarify this phenomenon. Therefore, in this study, the carbon corrosion stress method is carried out with GDLs which have various MPL penetration levels and the effects of the MPL penetration level on the characteristics change of the GDL are analyzed. The changes in characteristics are measured with various properties of GDL such as weight, thickness and static contact angle. The degraded GDL shows loss of their properties.