• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.167-177
• /
• 2013

원자 힘 현미경(Atomic Force Microscopy, AFM) 탐침과 표면 사이의 좁은 틈에서 형성되는 나노미터 크기의 물 메니스커스는 AFM을 사용하여 측정하는 이미지에 영향을 주는 것으로 알려져 있다. 본 연구에서는 격자 기체 기반의 몬테카를로 시뮬레이션을 이용하여 탐침의 곡률과 결합 에너지 특성이 메니스커스의 형상과 그로 인해 발생하는 모세관 힘에 어떠한 영향을 미치는지 알아보았다. 일반적으로 탐침의 곡률이 커질수록, 친수성이 작아질수록 메니스커스 폭은 좁아지고 모세관 힘이 줄어드는 것을 확인하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.120-122
• /
• 1998

현재 상업화되어있는 RO membrane으로는 크게 asymmetric membrane과 composite membrane으로 구분될 수 있다. Asymmetric membrane의 소재로는 Cellulose acetate나 Cellulose triacetate와 같은 것들이 사용되며 현재에도 많이 사용되고 있으나, 보다 더 우수한 성능을 갖는 분리막을 제조하기 위해 현재에는 주로 composite membrane 형태로 제조된다. 대부분의 composite membrane은 계면중합에 의해 제조되는데 대표적인 membranem으로는 FT-30이 있다. 이 밖에도 support의 표면을 직접 플라즈마 처리하여 복합막을 제조하는 공정이 있으며 polyactrylonitrile과 같은 membrane이 이에 속한다. 플라즈마 처리된 복합막은 처리 대상에 크게 영향을 받지 않고 support 표면에 crosslinking의 형태로 형성되기 때문에 active layer가 매우 안정하며 따라서 우수한 물리화학적 성질을 기대할 수 있다. 이밖에도 분리막 표면을 친수성 단량체로 플라즈마 처리함으로써 분리막 표면에 친수성을 부여하거나 관능기를 도입함으로써 불활성 표면을 활성화 시킬 수도 있는 등의 여러가지 장점을 가지고 있다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.483-491
• /
• 2016

Even though the antifogging property of nanosilica coated glass surface is highly increased due to the hydrophilic hydroxyl groups on nanosilica surface, the durability of this property on outdoor glass was diminished rapidly after rain washing. In addition the topology of nanosilica coated glass surface plays very important roles to control an light transmittance or antireflection property. To improve these coating durability and characteristics a hydrophilic nanosilica coating on glass was prepared by coating with 1.5 wt% of nanosilica (Ludox) suspension in the presence of hydrolyzed tetraethylorthosilicate (TEOS). The optimum hydrolysis condition of TEOS in acidic or basic aqueous solution was also examined by contact angle measurement. The final transparent hydrophilic coating layer coated with nanosilica-TEOS in acidic condition (pH=4) showed much improved durability of hydrophilic surface as well as higher visible light transmittance than original uncoated glass by 2 % point.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.343-348
• /
• 2010

The surface of low density polyethylene (LDPE) film was oxyfluorinated under different reaction conditions to introduce hydroperoxide groups and change surface characteristics. Hydroperoxide functional groups created by oxyfluorination were used as active sites for graft polymerization with hydrophobic monomer, acryl amide (AM), and hydrophilic monomer, methyl methacrylate (MMA) to carry out the second modification of the LDPE film surface. The surface properties of the OFPE films and grafted OFPE films were characterized by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method, ATR-IR, contact angle measurement and DSC. From the results of DPPH method, the amount of hydroperoxide groups on the oxyfluorinated LDPE film continuously increased as the total pressure in the oxyfluorination and the partial pressure of fluorine gas increased. The water contact angle and surface free energy measurements showed that hydrophilic liquid (water) contact angle on LDPE film surface decreased with hydrophilic AM grafting and hydrophobic liquid (methylene diiodide) contact angle on LDPE film surface decreased with hydrophobic MMA grafting. These were attributed to AM or MMA monomer grafting and the wettability of LDPE filmsurface to hydrophilic and hydrophobic liquids were improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.143.1-143.1
• /
• 2013

최근 실 기반 microfluidics device는 많은 응용 가능성을 보이고 있다. 예를 들면 의료진단, 환경측정 그리고 식품 안정성 분석 등의 분야에서 사용이 가능하다. 이러한 가능성을 가진 반면 해결해야 하는 문제점들이 존재한다. 실 한가닥에 Capillary force에 의해 빨려 올라오는 액체의 속도를 조절하기 힘들다는 것이다. 속도 조절은 실 기반 microfluidics에서는 매우 중요한 역할을 하는 것이므로 이는 굉장히 치명적일 수 있다. 본 그룹은 울의 젖음성을 변화시킴으로써 그 속도를 조절하였다. 울은 본래 소수성의 성질을 가졌으며 본 그룹의 표면처리를 통하면 친수성을로 바뀌는 것을 확인하였다. 표면처리의 종류와 정도에 따라 친수성을 띄는 정도가 달라지는 것을 확인하였다. 결과적으로는 표면처리에 따라 서로 액체를 빨아들이는 속도가 다른 울들을 microfluidics device에 응용할 수 있다는 결론을 지을 수 있다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.288-292
• /
• 2009

Hydrophobic/hydrophilic patterned substrates were fabricated on a glass substrate by a liquid phase deposition (LPD) method. Hydrophobic surface was obtained by modifying ZnO thin films with a rough surface using a fluoroalkyltrimethoxysilane (FAS) and hydrophilic surface was prepared by decomposing FAS on an exposed to UV light. The hexagonal ZnO rods were perpendicularly grown by LPD method on glass substrates with a ZnO seed layer. The diameter and thickness of hexagonal ZnO rods were increased as a function of increases of immersion time. The surface morphology, thickness, crystal structure, transmittance and contact angle of prepared ZnO thin films were measured by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible spectrophotometer (UV-vis) and contact angle measurement. Hydrophilic ZnO thin films with a contact angle of $20^{\circ}{\sim}30^{\circ}$ were changed to a hydrophobic surface with a contact angle of $145^{\circ}{\sim}161^{\circ}$ by a FAS surface treatment. Prepared hydrophobic surface was pattered by an irradiation of UV light using shadow mask with $300\;{\mu}m$ or 3 mm dot size. Finally, the hydrophobic surface exposed to UV light was changed to a hydrophilic surface.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.168-174
• /
• 2006

To utilize as highly functional scaffolds for tissue engineering by improving hydrophobicity and cell compatibility of the exist polymer scaffolds, the biodegradable poly(L-lactic acid) (PLLA) films and scaffolds having the optimal hydrophilicity were prepared by in situ plasma treatment and grafting of a carboxyl acid-containing monomer, acrylic acid (AA) in the chamber. From the results of surface analyses, surface-modified nonporous PLLA film and dual pore scaffold surfaces showed high hydrophilicity due to the decrease in contact angle and the increase in carboxylic groups as compared with untreated PLLA control. In particular, among various surface modification methods, Ar(argon)+AA+AA sample prepared by Ar plasma and then acrylic acid treatments displayed lower contact angle and more carboxylic groups thar Ar/AA and Ar+TP(thermal polymerization) samples, indicating that Ar+AA+AA sample was optimally treated for improving its hydrophilicity. In the cases of surface modified nonporous PLLA films and dual pore scaffolds, the adhesion and proliferation of chondrocytes increased with increasing their hydrophilicity.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.137-141
• /
• 2010

Generally, polymer materials are not air-permeable and hydrophilic. In addition, they do not possess anti-fungal property. Hydrophilicity, air-permeability, and anti-fungal properties of new composites consisting of polymer, ceramic nanoparticles, and silver ion were investigated by contact angle measurements, air permeation time, and cell culture. The hydrophilic, air-permeable, and anti-fungal composites can be used in health care industry.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.45-45
• /
• 2007

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.649-655
• /
• 2013

In order to use as supporters for the reinforced composite fuel cell membrane, poly(acrylic acid)-grafted porous polytetrafluoroethylenes (PTFEs) were prepared via introduction of poly(acrylic acid) graft chains by a radiation grafting method. FTIR was utilized to confirm the successful introduction of poly(acrylic acid) graft polymer chains into the porous PTFEs. Contact angles were examined to observe the hydrophilicity of the surface of the prepared substrates. The result indicates that the hyrophilicity of the surface in the prepared substrates increases with an increase in the number of hydrophilic polymer chains. FE-SEM, gurley number, and tensile strength were also utilized to characterize the prepared substrates.