DOI QR코드

DOI QR Code

Radiolytic Fabrication and Characterization of PTFE-g-PAA as the Supporters for the Reinforced Composite Fuel Cell Membrane

방사선을 이용한 강화 복합 연료전지막 다공성 지지체용 PTFE-g-PAA 제조 및 특성 연구

  • Sohn, Joon-Yong (Research Division for Industry and Environment, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute) ;
  • Park, Byeong-Hee (Research Division for Industry and Environment, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute) ;
  • Song, Ju-Myung (Research Division for Industry and Environment, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute) ;
  • Lee, Young-Moo (WCU Department of Energy Engineering, College of Engineering, Hanyang University) ;
  • Shin, Junhwa (Research Division for Industry and Environment, Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute)
  • 손준용 (한국원자력연구원 첨단방사선연구소 공업환경연구부) ;
  • 박병희 (한국원자력연구원 첨단방사선연구소 공업환경연구부) ;
  • 송주명 (한국원자력연구원 첨단방사선연구소 공업환경연구부) ;
  • 이영무 (한양대학교 공과대학 WCU 에너지공학과) ;
  • 신준화 (한국원자력연구원 첨단방사선연구소 공업환경연구부)
  • Received : 2013.06.05
  • Accepted : 2013.07.05
  • Published : 2013.09.25

Abstract

In order to use as supporters for the reinforced composite fuel cell membrane, poly(acrylic acid)-grafted porous polytetrafluoroethylenes (PTFEs) were prepared via introduction of poly(acrylic acid) graft chains by a radiation grafting method. FTIR was utilized to confirm the successful introduction of poly(acrylic acid) graft polymer chains into the porous PTFEs. Contact angles were examined to observe the hydrophilicity of the surface of the prepared substrates. The result indicates that the hyrophilicity of the surface in the prepared substrates increases with an increase in the number of hydrophilic polymer chains. FE-SEM, gurley number, and tensile strength were also utilized to characterize the prepared substrates.

방사선 그래프팅 방법을 이용하여 다공성 PTFE 지지체에 친수성 고분자 사슬인 아크릴산 사슬을 도입시켜 강화 복합 연료전지막의 지지체로 사용하기 위한 PTFE 친수화 다공성 지지체를 제조하였고 FTIR을 이용하여 다공성 PTFE에 친수성 고분자가 성공적으로 도입되었음을 확인하였다. 제조된 지지체의 표면 친수화 정도를 관찰하기 위해 접촉각을 측정한 결과, 도입된 친수성 고분자 사슬이 증가할수록 소수성의 PTFE 표면 친수화도가 증가됨을 확인하였다. 또한 제조된 지지체의 물리화학적, 형태학적 특성은 FE-SEM, gurley number, 인장강도를 측정하여 관찰하였다.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. K. V. Kordesch and G. R. Simader, Fuel Cells and their Applications, VCH Publishers Inc., Wienheim, Germany, 1996, Chapter 4.
  2. K.A. Mauritz and R. B. Moore, Chem. Rev., 104, 4535 (2004). https://doi.org/10.1021/cr0207123
  3. S. Agro, T. DeCarmine, S. DeFelice, and L. Thoma, Annual Progress Report for the DOE Hydrogen Program, 2005, p. 790, US Department of Energy (DOE), website: http://www.hydrogen.energy.gov.
  4. C. Yang, P. Costamagna, S. Srinivasan, J. Benziger, and A. B. Bocarsly, J. Power Sources, 103, 1 (2001). https://doi.org/10.1016/S0378-7753(01)00812-6
  5. H. Ghassemi, G. Ndip, and J. E. McGrath, Polymer, 45, 5855 (2004). https://doi.org/10.1016/j.polymer.2004.06.009
  6. K. Miyatake and M. Watanabe, Electrochem., 73, 12 (2005).
  7. M. L. D. Vona, D. Marani, A. D. Epifanio, S. Licoccia, I. Beurroies, and R. Denoyel, J. Membr. Sci., 304, 76 (2007). https://doi.org/10.1016/j.memsci.2007.07.013
  8. H. Huh, D. J. Kim, and S. Y. Nam, Membrane J., 21, 247 (2011).
  9. D. J. Kim, H. Y. Hwang, and S. Y. Nam, Membrane J., 21, 389 (2011).
  10. D. J. Kim and S. Y. Nam, Membrane J., 22, 155 (2012).
  11. D. J. Yoo, S. H. Hyun, A. R. Kim, G. G. Kumar, and K. S. Nahm, Polym. Int., 60, 85 (2011). https://doi.org/10.1002/pi.2914
  12. L. Wang, B. L. Yi, H. M. Zhang, Y. H. Liu, D. M. Xing, Z. G. Shao, and Y. H. Cai, J. Power Sources, 167 47 (2007). https://doi.org/10.1016/j.jpowsour.2006.12.111
  13. K. H. Kim, S. Y. Ahn, I. H. Oh, H. Y. Ha, S. A. Hong, M. S. Kim, Y. K. Lee, and Y. C. Lee, Electrochim. Acta, 50, 577 (2004). https://doi.org/10.1016/j.electacta.2004.03.051
  14. M. P. Rodgers, J. Berring, S. Holdcroft, and Z. Shi, J. Membr. Sci., 321, 100 (2008). https://doi.org/10.1016/j.memsci.2008.01.007
  15. T. Tezuka, K. Tadanaga, A. Matsuda, A. Hayashi, and M. Tatsumisago, Electrochem. Commun., 7, 245 (2005). https://doi.org/10.1016/j.elecom.2005.01.009
  16. H. Munakata, D. Yamamoto, and K. Kanamura, Chem. Commun., 31, 3986 (2005).
  17. T. Nguyen and X. Wang, J. Power Sources, 195, 1024 (2010). https://doi.org/10.1016/j.jpowsour.2009.08.049
  18. F. Liu, B. Yi, D. Xing, J. Yu, and H. Zhang, J. Membr. Sci., 212, 213 (2003). https://doi.org/10.1016/S0376-7388(02)00503-3
  19. H. Tang, M. Pan, F. Wang, P. K. Shen, and S. P. Jiang, J. Phys. Chem. B, 111, 8684 (2007). https://doi.org/10.1021/jp073136t
  20. M. P. Rodgers, J. Berring, S. Holdcroft, and Z. Shi, J. Membr. Sci., 321, 100 (2008). https://doi.org/10.1016/j.memsci.2008.01.007
  21. H. Tang, X. Wang, M. Pan, and F. Wang, J. Membr. Sci., 306, 298 (2007). https://doi.org/10.1016/j.memsci.2007.09.008
  22. S.-Y. Ahn, Y.-C. Lee, H. Y. Ha, S.-A. Hong, and I.-H. Oh, Electrochim. Acta, 50, 571 (2004). https://doi.org/10.1016/j.electacta.2004.01.133
  23. T. L. Yu, H.-L. Lin, K.-S. Shen, L.-N. Huang, and Y.-C. Chang, J. Polym. Res., 11, 217 (2004). https://doi.org/10.1023/B:JPOL.0000043408.24885.c6
  24. Z. Jie, T. Haolin, and P. Mu, J. Membr. Sci., 312, 41 (2008). https://doi.org/10.1016/j.memsci.2007.12.025
  25. H.-L. Lin, T. L. Yu, K.-S. Shen, and L.-N. Huang, J. Membr. Sci., 237, 1 (2004). https://doi.org/10.1016/j.memsci.2004.01.021
  26. X. Zhu, H. Zhang, Y. Liang, Y. Zhang, Q. Luo, C. Bi, and B. Yi, J. Mater. Chem., 17, 386 (2007). https://doi.org/10.1039/b611690f
  27. H. Tang, M. Pan, S. P. Jiang, X. Wang, and Y. Ruan, Electrochim. Acta, 52, 5304 (2007). https://doi.org/10.1016/j.electacta.2007.02.031
  28. E. T. Kang and Y. Zhang, Adv. Mater., 12, 1481 (2000). https://doi.org/10.1002/1521-4095(200010)12:20<1481::AID-ADMA1481>3.0.CO;2-Z
  29. J.-Y. Sohn, H.-J. Sung, J. Shin, B.-S. Ko, J.-M. Song, and Y.-C. Nho, Macromol. Res., 20, 912 (2012). https://doi.org/10.1007/s13233-012-0131-1
  30. B.-S. Ko, S.-A. Kang, F. Geng, J.-P. Jeun, Y.-C. Nho, P.-H. Kang, C.-Y, Kim, and J. Shin, Polymer(Korea), 34, 20 (2010).
  31. G. Fei, J.-Y. Sohn, Y.-S. Lee, Y.-C. Nho, and J. Shin, Polymer (Korea), 34, 464 (2010).
  32. M. Kattan and E. El-Nesr, J. Appl. Polym. Sci., 102, 198 (2006). https://doi.org/10.1002/app.24010
  33. E. Bucio and G. Burillo, Radiat. Phys. Chem., 76, 1724 (2007). https://doi.org/10.1016/j.radphyschem.2007.02.109
  34. C.-Y. Tu, Y.-L. Liu, K.-R. Lee, and J.-Y. Lai, J. Membr. Sci., 274, 47 (2006). https://doi.org/10.1016/j.memsci.2005.08.001
  35. K. Kaji and M. Hatada, J. Appl. Polym. Sci., 37, 2153 (1989). https://doi.org/10.1002/app.1989.070370807