• Title/Summary/Keyword: 치폭

Search Result 15, Processing Time 0.034 seconds

The Characteristic Analysis of a Single-Layer 12-slot 10-pole PM Synchronous Motor with Asymmetric Teeth Widths (단층권 12-Slot 10-Pole 영구자석 동기 전동기의 비대칭 치폭에 따른 특성 해석)

  • Kim, Tae-Heoung
    • Journal of IKEEE
    • /
    • v.22 no.4
    • /
    • pp.1206-1209
    • /
    • 2018
  • Single-layer winding configuration in a 12-slot 10-pole Permanent Magnet Synchronous Motor (PMSM) has been adopting in electrical power steering (EPS) systems to get the high fault tolerance capability of the motor. However, the motor with single-layer winding has magnetic circuit saturations in the teeth, which deteriorates its performance. In this paper, we propose asymmetric teeth widths to get over the demerit, and analyze the effect of the teeth width ratio variations on the performances of the PMSM. As a result, we suggest the most valuable teeth width ratio for designing the PMSM with a single-layer winding configuration.

A Study on the Root Fillet Stress Analysis of Helical Gear due to Helix Angle and Face Width (헬리컬기어에서 나선각과 치폭의 변화에 따른 이뿌리응력에 관한 연구)

  • Han, An-Su;Hong, Min-Sung;Cho, Jin
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.16 no.4
    • /
    • pp.45-50
    • /
    • 2007
  • In this paper, the FEM(Finite Element Method) has been applied to understand the geometrical characteristics and to analyze the stress of a helical gear. The helical gear is simulated and analyzed by adding many thin spur gear with helix angles and twist angles. Helical gears with different helix angle and face width have been studied. The results show that the root fillet stress is increased proportionally to helix angle and face width. Namely, as the face width increases, root fillet stress decreases, and as helix angle gets bigger, root fillet stress increases.

Optimum Design of Pitch Reducer for Wind Turbine Using Genetic Algorithm (유전 알고리즘을 이용한 풍력발전기용 피치감속기의 최적 설계)

  • Kim, Jeong Gil;Park, Young Jun;Lee, Geun Ho;Nam, Yong Yun;Yang, Woo Yeoul
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.2
    • /
    • pp.185-192
    • /
    • 2014
  • Planetary gear design is complex because it involves a combination of discrete variables such as module, integer variables such as the number of teeth, and continuous variables such as face width and aspect ratio. Thus, an optimum design technique is needed. In this study, we applied a genetic algorithm to the design optimization of a planetary gear. In this algorithm, tooth root strength and surface durability are assessed with fundamental variables such as the number of teeth, module, pressure angle, and face width. With the help of this technique, gear designers could reduce trial and error in the initial design stages, thus cutting the time required for planetary gear design.

Optimal Design of Tooth and Yoke Width Using Equivalent Magnetic Circuit in Concentrated Winding Motor (등가 자기회로를 이용한 집중권 전동기의 치폭 요크폭 최적설계)

  • Kim, Do-Jin;Kwon, Soon-O;Hong, Jung-Pyo;Nam, Hyuk
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.869_870
    • /
    • 2009
  • This paper presents optimal design of tooth and yoke width for increasing torque density when designing concentrated winding Interior Permanent Magnet Synchronous Motor(IPMSM) which is used currently. In case of IPM, characteristic of motor chages according to saturation, thus design consib dering saturation should be done. This paper proposed method to decide tooth and yoke width using magnetic equivalent circuit with calculated magnetic resistance. This method provide less effort and time than FEM using optimal design when deciding tooth and yoke width. Proposed method and FEM are compared and verified.

  • PDF

High Performance Reluctance Resolver Design for Motor Control (전동기 제어를 위한 고성능 릴럭턴스 레졸버 설계)

  • Lee, Taeyeon;Nam, Kwanghee
    • Proceedings of the KIPE Conference
    • /
    • 2019.11a
    • /
    • pp.108-109
    • /
    • 2019
  • 현대 산업기기의 큰 비중을 차지하는 전동기는 벡터 제어를 위해 각도 정보를 필수적으로 요구한다. 따라서, 엔코더와 권선형 레졸버 그리고 릴럭턴스 레졸버와 같은 많은 각도 센서가 활발히 사용되고 있다. 센서리스와 같이 센서를 이용하지 않고 각도를 추정하는 연구도 많이 진행되고 있지만, 높은 안정성을 요구하는 시스템에서는 여전히 각도 센서가 주를 이루고 있다. 각도 센서 중에서 높은 정확도와 안정성 그리고 내구성을 가지는 레졸버가 각광받고 있으며, 특히 릴럭턴스 레졸버(Variable Reluctance Resolver)가 많이 사용된다. 본 논문은 전동기의 제어 성능과 안정성을 높이기 위한 고성능 레졸버 설계의 내용을 담고 있으며, 기존의 릴럭턴스 레졸버와 달리 레졸버 고정자의 치폭을 변조하여 각도 오차를 줄이는 내용을 다루고 있다.

  • PDF

Characteristics Analysis on Teeth Width of Permanent Magnet DC Motor (영구자석 직류전동기의 치폭에 따른 특성해석)

  • Chun, Kyu-Hyuk;Seo, Young-Taek;Bae, Sang-Han;Oh, Chul-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2000.07b
    • /
    • pp.882-884
    • /
    • 2000
  • This paper deals with the effect of teeth width variation in Permanent Magnet DC motor. As teeth width varies, effective flux density is influenced, which is closely related to torque-speed characteristics, output power, and efficiency of the motor. In this study. motor design was carried out using finite element method with various teeth width. Prototype motors under constraints of same armature diameter, material and axial length were made and their performances were tested.

  • PDF

Design of Vehicle Motor for EPS considering Cogging Torque (코깅토크를 고려한 자동차 EPS용 전동기 설계)

  • Kim, Chang-Ki;Lee, Sang-Gon;Jung, Sang-Yong
    • Proceedings of the KIEE Conference
    • /
    • 2009.04b
    • /
    • pp.9-11
    • /
    • 2009
  • 자동차 EPS(Electric Power Steering)용 소용량 표면부착형 영구자석 동기전동기(SPMSM : Surface mounted Permanent Magnet Synchronous Motor)의 설계에는 주로 토크리플 및 코깅토크 저감이 설계목표로 결정되는데, 토크리플과 코깅토크는 치폭, 요크폭, 자석 극호각 등 전동기 형상에 영향을 많이 받는다. 특히, 자석 극호각에 따라 변동이 극심한데, 이는 출력특성이 공극 자속밀도 변화량에 크게 의존하기 때문이다. 한편, 일반적으로 토크리플과 코깅토크의 최소점은 각각 다르기 때문에, 소용량 SPMSM 설계시 큰 어려움으로 작용한다. 따라서 본 논문은 이러한 현상을 효과적으로 고려한 소용량 SPMSM 최적설계를 목적으로 하며, 600W급 고전압 EPS용 전동기 설계를 통해 연구의 타당성을 검증한다.

  • PDF

A study of Design and Certification for Reduced Speed in Valve (밸브의 감속기 검증 및 설계에 관한 연구)

  • 이명재;안태현;김윤철
    • Proceedings of the KAIS Fall Conference
    • /
    • 2001.11a
    • /
    • pp.111-116
    • /
    • 2001
  • 본 논문에서는 유체기계에서 사용되고 있는 홀로제트밸브의 감속기에 대하여 APM S/W로 시뮬레이션(simulation) 하였다. 수압과 외부의 힘에 의해서 전달되는 베벨기어의 설계검증 및 재설계 관하여 시뮬레이션을 하였다. 도면의 재원을 변경시키지 않고 기어의 수명을 시뮬레이션한 결과 SM45C를 Martempering하여 사용할 시 기어의 수명이 짧아 적절치 못하였고 고주파열처리강, 질화열처리강을 사용할 경우 기어의 수명시간이 12,957-20,983시간 이였고 침탄강을 사용할 시 기어의 수명은 영구적이었고 소재의 경도가 우수할수록 더 많은 허용굽힘응력과 허용접촉응력을 받을 수 있다는 것을 시뮬레이션을 통하여 입증된다. 그리고 기어의 검증결과로 기어를 다시 설계할 경우 고주파나 질화강으로 하여 기어의 잇수가 1-3개만 늘어나고, 피치원의 지름이 4-12mm늘어나면 영구적으로 사용할 수 있고 침탄강을 사용할 시 치폭이 3mm줄어들고, 기어 잇수가 1-3개 줄어들고 피치원의 지름이 4-13mm 줄어들어 감속기를 경량화 시킬 수 있다는 것을 시뮬레이션을 통하여 입증되었다.