• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.401-409
• /
• 1997

The purpose of this study was to analize the initial stress distribution around apex and the alveolar bone of the upper anterior teeth when applying intrusive force by the use of utility arthwire, Burstono 3-piece infusion archwire, and 'J' hook headgear which is usually used in clinital practice. By the use of the polarization plate, initial stresses were analized when 80g and 150g forte applied. The results were as follows. 1. With the utility archwire, moderate levels of stress were evenly distributed on the apical areas of the anterior teeth and concentrated on the apical areas of the first molars. 2. With the Burstone's 3-piece intrusion archwire, moderate levels of stress were evenly distributed on the apical areas of the anterior and posterior teeth. 3. With the 'J' hook headgear, severe levels oi stress were widely distributed on the alveolar bone and apical areas of the upper anterior teeth, and concentrated on the apical area between the central and the lateral incisors. Especially, weak levels of stress appeared along the periodontal ligament space of all teeth.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.15-22
• /
• 2005

The Purpose of this study was to clarity morphological differences among mandibular dental arch forms in Korean malocclusion patients. The sample in this study consisted of 114 Class I. 119 Class II, and 135 Class III malocclusion cases. The most facial portions of 13 proximal contact areas were digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on the data on the mandibular tooth thickness. Four linear and two proportional measurements were undertaken The dental arches were classified into square. ovoid, and tapered forms to compare the frequency distributions. Our results suggested that there was no single arch form specific to any particular Angle classification or sex. It appeared to be the frequency of a particular arch form that varies among the Angle classifications. In comparison of arch measurements between male and female. there was no statistical difference except in the intermolar width. In comparison of arch size measurements among the different Angle classifications, there were statistically significant differences between Class I and Class III malocclusion groups and between Class II and Class III malocclusion groups. In comparison oi frequency distribution of arch forms in Class I and III malocclusion groups, the square form demonstrated the highest distribution followed by the ovoid and tapered forms in that order. In the Class II malocclusion group, the square form showed the highest distribution. followed by the tapered and ovoid forms in that order There was no statistical difference in the frequency distribution of arch forms between male and female groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.205-212
• /
• 2020

The purpose of this study is to evaluate the validity of primary anterior zirconia crown made with Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technology by analyzing fracture strength and translucency parameter. Zirconia crown was designed with CAD software, using 3D scanned data of #61 tooth model. Crown fabrication was performed with CAM machine using zirconia block. Zirconia crowns were divided into 3 groups according to thickness(0.3, 0.5, and 0.7 mm), and fracture strength was compared with 1.0 mm thickness of resin strip crown. The compressive force was applied with universal testing machine at 30° along the incisal edge at increments of 1 mm/min. For translucency evaluation, 0.3, 0.5, and 0.7 mm thickness of zirconia specimens were fabricated and translucency was measured with spectrophotometer. Among zirconia groups, there was a significant increase in fracture strength as thickness increased (p < 0.05). The fracture strength of zirconia crown was significantly higher than resin strip crown in all groups (p < 0.05). Translucency parameter was highest in 0.3 mm group, and significantly decreased as thickness increased to 0.5 and 0.7 mm (p < 0.05). Thin primary anterior zirconia crown can be designed and fabricated according to individual needs by using CAD/CAM. Restoration with thin crown would reduce the amount of tooth reduction, risk of pulp exposure, and make more esthetic restoration possible.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.481-487
• /
• 2004

The purpose of this study was to clarify morphologic characteristics between mandibular clinical arch forms in Koreans with normal occlusions. The study included data from 102 Koreans. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The dental arches were classified into ovoid, square and tapered forms. The frequency distributions of the three mandibular arch form classifications were determined and compared between male and female subjects. No significant differences in arch form size were found between the sexes. However, there were a few differences in molar width. It was useful to classify mandibular clinical arch forms present in normal occlusion samples into ovoid, square and tapered categories. The frequency of the ovoid form was the highest, and that of the square form was the second highest. The tapered arch form was found in less than 10 percent of subjects. No significant differences in their frequency distributions and dimensions were shown between males and females.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.178-185
• /
• 2015

Purpose: The purpose of this study was to conduct a comparative assessment on the satisfaction level for the two interfaces of surgical guide system (SimPlant and R2GATE), the design and convenience of manufactured surgical guides and the importance of using the surgical guides thereof by means of survey. Materials and Methods: Hereupon, they simulated the implant surgical process by mounting the two manufactured systems of surgical guide on a dental mold, respectively. The study subjects were instructed to complete the questionnaire as to the satisfaction level upon completion of the simulated surgery. This study summarized the data of each question after collecting the completed questionnaires. Then, this study analyzed the summarized data by utilizing statistical program SPSS 20.0 (IBM). Results: R2GATE had a higher value of the satisfaction level on the design and convenience of manufactures surgical guides. R2GATE group ($7.33{\pm}1.26$) was found to have a higher value in terms of the overall satisfaction level compared to SimPlant group ($6.67{\pm}1.26$) (${\alpha}$ = 0.05). Conclusion: The user satisfaction level on the surgical guide manufactured for R2GATE system was to such an extent as it can be widely used in clinical environment. Moreover, the surgical guide manufactured as R2GATE system can guide both the length and direction of a drill simultaneously. As a result, it is highly recommended for those beginners who do not have a lot of experience in implant placement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.382-388
• /
• 2002

In the present study, crown diameters and their sexual differences in deciduous teeth were investigated in children of Chon-ju city, Korea. Plaster casts of the deciduous dentitions obtained from 50 boys and 50 girls were examined. Mesiodistal and buccolingual crown diameters were measured using a digital caliper(0.01mm) according to the definitions of Seipel and Moorees et al. These measurements were performed three times, and intra-observer measurement errors were calculated by the single determination method. The crown index, module and area were calculated in order to provide a comparison of crown proportions. The results obtained were summarized as follows; 1. The mean values of intra-observer measurement errors were 0.255mm and are unlikely to have influenced the statistical analysis. 2. The mean values of mesiodistal and buccolingual crown diameters examined were larger in boys than girls. 3. The mean coefficient of variation was 5.6 in the deciduous dentition. There were a trend for the primary second molar to be the least variable in size of all teeth both in boys and girls. 4. Fluctuating asymmetry is the difference between left and right antimeres in individuals. Primary second molars were less asymmetrical than primary first molars in both dimensions. 5. In maxillary teeth, Crown index is larger in boys than in girls. In contrast, in mandibular teeth, except primary canine, it is larger in girls than in boys. Crown module is larger in boys than in girls and increased progressively from primary first incisor to primary second molar. Crown area is consistently larger in boys than in girls. The minimum crown area is mandibular primary incisor and maximum crown area is maxillary primary second molar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.397-406
• /
• 2002

The purpose of this study was to clarify the palatal arch length, width and volume in the primary and permanent dentition. Samples were consisted of normal occlusion in the primary dentition(50 males and 50 females) and permanent dentition(43 males and 43 females). Their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve, loft surface and fit and horizontal plane were made for measuring the palatal arch length, width and volume(Surfacer 10.0, Imageware, U.S.A.). Correlation coefficients were calculated separately for males and females in each group(SPSS 10.0). The results were as follows : 1. Average distance from the fit plane to the points(tooth-tooth-palate) was greater in the permanent dentition than those of primary dentition. 2. Palatal volume was greater more than 3 times in the permanent dentition, especially it was greater in male compared to female with significance(p<0.05). 3. Palatal width of male was greater in the primary and permanent dentition but palatal length, only in the permanent dentition than that of female(P<0.05). 4. Correlation coefficients were statistically most significant between the palatal volume and size of posterior palatal width and total palatal length(r=0.401, r=0.450, r=0.678, r=0.654).

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.315-321
• /
• 2010

The aim of this study was to assess change of the oral health related quality of life after fixed prosthetic treatment using implant therapy. One hundreds and twenty patients from 3 dental clinics in Seoul, Incheon and Daegu were recruited after verbal consent. The oral health related quality of life by OHIP-14, the treatment satisfaction by North Texas Periodontal Associates and the oral health interest w+ere measured before fixed prosthetic treatment using implant and one months after prosthetics. Total OHIP-14 changed significantly between pre- and post- treatment (p<0.001). Although gender(p=0.01), economic status (p=0.04) and education status (p=0.01) affect to OHIP-14 significantly before treatment, these factors didn't have effects on OHIP-14 after treatment. The subjective satisfaction in masticatory function, social function and psychological function increased significantly after treatment (p<0.001). Besides, the patients' oral health interests increased significantly after treatment (p<0.001). The fixed prosthetic treatment using implant therapy can improve the oral health related quality of life, subjective satisfaction of mastication, social function and psychological function, and oral health interest of dental patients.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.697-709
• /
• 1997

This study was designed to investigate the stress intensity and distribution produced by 1mm activation of retraction archwire with $0^{\circ},\;7^{\circ},\;14^{\circ}$ torque and application of high polk J-hook headgear during retraction of four maxillary incisors using the photoelastic stress analysis. The photoelastic model was made with a PL-3 type epoxy resin which was substituted by alveolar bone portion. Each retraction archwire was fabricated from .020' X .025' stainless steel wire which had vertical loops in 7mm height and hooks for high pull J-hook headgear between central and lateral incisors. The high pull J-hook headgear was applied 35 degree backward and upward to occlusal plane with 200gm pet each side The findings of this study were as follows: 1. In case of $0^{\circ}$ torque, the stress was distributed from cervical 1/8 to apex of roots of central and lateral incisors which were the forms of arc mode. When the high pull J-hook headgear was applied, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. The stress between apecies of central and Lateral incisors was presented also. 2. In case of $7^{\circ}$ torque, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented mote apically than without headgear. The stress between apecies of central and lateral incisors was presented also. 3. In case of $14^{\circ}$ torque, the stress distributed by following the root surface was Presented from alveolar crest to apex of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented stronger than without headgear The stress between apecies of central and lateral incisors was presented also.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.253-260
• /
• 2004

Frictional force between the orthodontic bracket and arch wire during sliding tooth movement is related to many factors, such as the size, shape and material of both the bracket and wire, ligation method and the angle formed between the bracket and wire. There have been clear conclusions drawn in regard to most of these factors, but as to the effect of bracket width on frictional force there are only conflicting studies. This study was designed to investigate the effect of bracket width on the amount of frictional forces generated during clinically simulated tooth movement. Three different widths of brackets $(0.018{\times}0.025'\;standard)$ narrow (2.40mm), medium (3.00mm) and wide (4.25mm) were used in tandem with $0.016{\times}0.022'$ stainless steel wire. Three bracket-arch wire combinations were drawn on for 4 minutes on a testing apparatus with a head speed of 0.5mm/min and tested 7 times each. To reproduce biological conditions, dentoalveolar models were designed with indirect technique using a material with similar elastic properties as periodontal ligament (PDL). In addition, to minimize the effect of ligation force, elastomer was used with added resin, which was attached to the bracket to make up for the discrepancies of bracket width. The results were as follows: 1. Maximum frictional force for each bracket-arch wire combination was: Narrow (2.40mm): $68.09\pm4.69gmf$ Medium (3.00mm): $72.75\pm4.98 gmf$ Wide (4.25mm): $72.59\pm4.54gmf$ 2. Frictional force was increased with more displacement of wire through the bracket slot. 3. The ANOVA psot-hoc test showed that the bracker width had no significant effect on frictional force when tested under clinically simulated conditions(p>0.05).